From 1ef05f24e28938c7a0608b4c6b369094d1dccaa6 Mon Sep 17 00:00:00 2001 From: Mounir IDRASSI Date: Wed, 9 Feb 2022 23:47:25 +0100 Subject: Windows: Reduce the size of installers by almost 50% by using LZMA compression instead of DEFLATE --- src/Common/lzma/LzmaDec.h | 236 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 236 insertions(+) create mode 100644 src/Common/lzma/LzmaDec.h (limited to 'src/Common/lzma/LzmaDec.h') diff --git a/src/Common/lzma/LzmaDec.h b/src/Common/lzma/LzmaDec.h new file mode 100644 index 00000000..6f129625 --- /dev/null +++ b/src/Common/lzma/LzmaDec.h @@ -0,0 +1,236 @@ +/* LzmaDec.h -- LZMA Decoder +2020-03-19 : Igor Pavlov : Public domain */ + +#ifndef __LZMA_DEC_H +#define __LZMA_DEC_H + +#include "7zTypes.h" + +EXTERN_C_BEGIN + +/* #define _LZMA_PROB32 */ +/* _LZMA_PROB32 can increase the speed on some CPUs, + but memory usage for CLzmaDec::probs will be doubled in that case */ + +typedef +#ifdef _LZMA_PROB32 + UInt32 +#else + UInt16 +#endif + CLzmaProb; + + +/* ---------- LZMA Properties ---------- */ + +#define LZMA_PROPS_SIZE 5 + +typedef struct _CLzmaProps +{ + Byte lc; + Byte lp; + Byte pb; + Byte _pad_; + UInt32 dicSize; +} CLzmaProps; + +/* LzmaProps_Decode - decodes properties +Returns: + SZ_OK + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); + + +/* ---------- LZMA Decoder state ---------- */ + +/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. + Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ + +#define LZMA_REQUIRED_INPUT_MAX 20 + +typedef struct +{ + /* Don't change this structure. ASM code can use it. */ + CLzmaProps prop; + CLzmaProb *probs; + CLzmaProb *probs_1664; + Byte *dic; + SizeT dicBufSize; + SizeT dicPos; + const Byte *buf; + UInt32 range; + UInt32 code; + UInt32 processedPos; + UInt32 checkDicSize; + UInt32 reps[4]; + UInt32 state; + UInt32 remainLen; + + UInt32 numProbs; + unsigned tempBufSize; + Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; +} CLzmaDec; + +#define LzmaDec_Construct(p) { (p)->dic = NULL; (p)->probs = NULL; } + +void LzmaDec_Init(CLzmaDec *p); + +/* There are two types of LZMA streams: + - Stream with end mark. That end mark adds about 6 bytes to compressed size. + - Stream without end mark. You must know exact uncompressed size to decompress such stream. */ + +typedef enum +{ + LZMA_FINISH_ANY, /* finish at any point */ + LZMA_FINISH_END /* block must be finished at the end */ +} ELzmaFinishMode; + +/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! + + You must use LZMA_FINISH_END, when you know that current output buffer + covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. + + If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, + and output value of destLen will be less than output buffer size limit. + You can check status result also. + + You can use multiple checks to test data integrity after full decompression: + 1) Check Result and "status" variable. + 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. + 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. + You must use correct finish mode in that case. */ + +typedef enum +{ + LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ + LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ + LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ + LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ +} ELzmaStatus; + +/* ELzmaStatus is used only as output value for function call */ + + +/* ---------- Interfaces ---------- */ + +/* There are 3 levels of interfaces: + 1) Dictionary Interface + 2) Buffer Interface + 3) One Call Interface + You can select any of these interfaces, but don't mix functions from different + groups for same object. */ + + +/* There are two variants to allocate state for Dictionary Interface: + 1) LzmaDec_Allocate / LzmaDec_Free + 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs + You can use variant 2, if you set dictionary buffer manually. + For Buffer Interface you must always use variant 1. + +LzmaDec_Allocate* can return: + SZ_OK + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); +void LzmaDec_FreeProbs(CLzmaDec *p, ISzAllocPtr alloc); + +SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); +void LzmaDec_Free(CLzmaDec *p, ISzAllocPtr alloc); + +/* ---------- Dictionary Interface ---------- */ + +/* You can use it, if you want to eliminate the overhead for data copying from + dictionary to some other external buffer. + You must work with CLzmaDec variables directly in this interface. + + STEPS: + LzmaDec_Construct() + LzmaDec_Allocate() + for (each new stream) + { + LzmaDec_Init() + while (it needs more decompression) + { + LzmaDec_DecodeToDic() + use data from CLzmaDec::dic and update CLzmaDec::dicPos + } + } + LzmaDec_Free() +*/ + +/* LzmaDec_DecodeToDic + + The decoding to internal dictionary buffer (CLzmaDec::dic). + You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! + +finishMode: + It has meaning only if the decoding reaches output limit (dicLimit). + LZMA_FINISH_ANY - Decode just dicLimit bytes. + LZMA_FINISH_END - Stream must be finished after dicLimit. + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_NEEDS_MORE_INPUT + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure +*/ + +SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- Buffer Interface ---------- */ + +/* It's zlib-like interface. + See LzmaDec_DecodeToDic description for information about STEPS and return results, + but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need + to work with CLzmaDec variables manually. + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). +*/ + +SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- One Call Interface ---------- */ + +/* LzmaDecode + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties + SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). + SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure +*/ + +SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, + ELzmaStatus *status, ISzAllocPtr alloc); + +EXTERN_C_END + +#endif -- cgit v1.2.3