From 4dacedd9ccdbdc6a6e62d9fb86e9b2ea903a3629 Mon Sep 17 00:00:00 2001 From: Mounir IDRASSI Date: Thu, 15 Sep 2016 10:04:05 +0200 Subject: Windows: Replace XZip/XUnzip library with zlib and libzip and include the sources of these library into VeraCrypt source tree. --- src/Common/XUnzip.cpp | 4405 ------------------------------------------------- 1 file changed, 4405 deletions(-) delete mode 100644 src/Common/XUnzip.cpp (limited to 'src/Common/XUnzip.cpp') diff --git a/src/Common/XUnzip.cpp b/src/Common/XUnzip.cpp deleted file mode 100644 index 913f4408..00000000 --- a/src/Common/XUnzip.cpp +++ /dev/null @@ -1,4405 +0,0 @@ -// XUnzip.cpp Version 1.3 -// -// Authors: Mark Adler et al. (see below) -// -// Modified by: Lucian Wischik -// lu@wischik.com -// -// Version 1.0 - Turned C files into just a single CPP file -// - Made them compile cleanly as C++ files -// - Gave them simpler APIs -// - Added the ability to zip/unzip directly in memory without -// any intermediate files -// -// Modified by: Hans Dietrich -// hdietrich@gmail.com -// -// Version 1.3: - Corrected size bug introduced by 1.2 -// -// Version 1.2: - Many bug fixes. See CodeProject article for list. -// -// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd() -// - Changed file names to avoid conflicts with Lucian's files -// -/////////////////////////////////////////////////////////////////////////////// -// -// Lucian Wischik's comments: -// -------------------------- -// THIS FILE is almost entirely based upon code by Info-ZIP. -// It has been modified by Lucian Wischik. -// The original code may be found at http://www.info-zip.org -// The original copyright text follows. -// -/////////////////////////////////////////////////////////////////////////////// -// -// Original authors' comments: -// --------------------------- -// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The -// definitive version of this document should be available at -// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely. -// -// Copyright (c) 1990-2002 Info-ZIP. All rights reserved. -// -// For the purposes of this copyright and license, "Info-ZIP" is defined as -// the following set of individuals: -// -// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, -// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, -// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, -// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, -// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, -// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, -// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White -// -// This software is provided "as is", without warranty of any kind, express -// or implied. In no event shall Info-ZIP or its contributors be held liable -// for any direct, indirect, incidental, special or consequential damages -// arising out of the use of or inability to use this software. -// -// Permission is granted to anyone to use this software for any purpose, -// including commercial applications, and to alter it and redistribute it -// freely, subject to the following restrictions: -// -// 1. Redistributions of source code must retain the above copyright notice, -// definition, disclaimer, and this list of conditions. -// -// 2. Redistributions in binary form (compiled executables) must reproduce -// the above copyright notice, definition, disclaimer, and this list of -// conditions in documentation and/or other materials provided with the -// distribution. The sole exception to this condition is redistribution -// of a standard UnZipSFX binary as part of a self-extracting archive; -// that is permitted without inclusion of this license, as long as the -// normal UnZipSFX banner has not been removed from the binary or disabled. -// -// 3. Altered versions--including, but not limited to, ports to new -// operating systems, existing ports with new graphical interfaces, and -// dynamic, shared, or static library versions--must be plainly marked -// as such and must not be misrepresented as being the original source. -// Such altered versions also must not be misrepresented as being -// Info-ZIP releases--including, but not limited to, labeling of the -// altered versions with the names "Info-ZIP" (or any variation thereof, -// including, but not limited to, different capitalizations), -// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of -// Info-ZIP. Such altered versions are further prohibited from -// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or -// of the Info-ZIP URL(s). -// -// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip", -// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its -// own source and binary releases. -// -/////////////////////////////////////////////////////////////////////////////// - -#ifndef _WIN64 -#define _USE_32BIT_TIME_T //+++1.2 -#endif - - -#define STRICT -#define WIN32_LEAN_AND_MEAN -#include -#include -#include -#include -#include -#include -#include "XUnzip.h" - -#pragma warning(disable : 4996) // disable bogus deprecation warning - -// THIS FILE is almost entirely based upon code by Jean-loup Gailly -// and Mark Adler. It has been modified by Lucian Wischik. -// The original code may be found at http://www.gzip.org/zlib/ -// The original copyright text follows. -// -// -// -// zlib.h -- interface of the 'zlib' general purpose compression library -// version 1.1.3, July 9th, 1998 -// -// Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler -// -// This software is provided 'as-is', without any express or implied -// warranty. In no event will the authors be held liable for any damages -// arising from the use of this software. -// -// Permission is granted to anyone to use this software for any purpose, -// including commercial applications, and to alter it and redistribute it -// freely, subject to the following restrictions: -// -// 1. The origin of this software must not be misrepresented; you must not -// claim that you wrote the original software. If you use this software -// in a product, an acknowledgment in the product documentation would be -// appreciated but is not required. -// 2. Altered source versions must be plainly marked as such, and must not be -// misrepresented as being the original software. -// 3. This notice may not be removed or altered from any source distribution. -// -// Jean-loup Gailly Mark Adler -// jloup@gzip.org madler@alumni.caltech.edu -// -// -// The data format used by the zlib library is described by RFCs (Request for -// Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt -// (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -// -// -// The 'zlib' compression library provides in-memory compression and -// decompression functions, including integrity checks of the uncompressed -// data. This version of the library supports only one compression method -// (deflation) but other algorithms will be added later and will have the same -// stream interface. -// -// Compression can be done in a single step if the buffers are large -// enough (for example if an input file is mmap'ed), or can be done by -// repeated calls of the compression function. In the latter case, the -// application must provide more input and/or consume the output -// (providing more output space) before each call. -// -// The library also supports reading and writing files in gzip (.gz) format -// with an interface similar to that of stdio. -// -// The library does not install any signal handler. The decoder checks -// the consistency of the compressed data, so the library should never -// crash even in case of corrupted input. -// -// for more info about .ZIP format, see ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip -// PkWare has also a specification at ftp://ftp.pkware.com/probdesc.zip - -#define zmalloc(len) malloc(len) - -#define zfree(p) free(p) - -/* -void *zmalloc(unsigned int len) -{ char *buf = new char[len+32]; - for (int i=0; i<16; i++) - { buf[i]=i; - buf[len+31-i]=i; - } - *((unsigned int*)buf) = len; - char c[1000]; wsprintf(c,"malloc 0x%lx - %lu",buf+16,len); - OutputDebugString(c); - return buf+16; -} - -void zfree(void *buf) -{ char c[1000]; wsprintf(c,"free 0x%lx",buf); - OutputDebugString(c); - char *p = ((char*)buf)-16; - unsigned int len = *((unsigned int*)p); - bool blown=false; - for (int i=0; i<16; i++) - { char lo = p[i]; - char hi = p[len+31-i]; - if (hi!=i || (lo!=i && i>4)) blown=true; - } - if (blown) - { OutputDebugString("BLOWN!!!"); - } - delete[] p; -} -*/ - -#pragma warning(disable : 4702) // unreachable code - -static ZRESULT zopenerror = ZR_OK; //+++1.2 - -typedef struct tm_unz_s -{ unsigned int tm_sec; // seconds after the minute - [0,59] - unsigned int tm_min; // minutes after the hour - [0,59] - unsigned int tm_hour; // hours since midnight - [0,23] - unsigned int tm_mday; // day of the month - [1,31] - unsigned int tm_mon; // months since January - [0,11] - unsigned int tm_year; // years - [1980..2044] -} tm_unz; - - -// unz_global_info structure contain global data about the ZIPfile -typedef struct unz_global_info_s -{ unsigned long number_entry; // total number of entries in the central dir on this disk - unsigned long size_comment; // size of the global comment of the zipfile -} unz_global_info; - -// unz_file_info contain information about a file in the zipfile -typedef struct unz_file_info_s -{ unsigned long version; // version made by 2 bytes - unsigned long version_needed; // version needed to extract 2 bytes - unsigned long flag; // general purpose bit flag 2 bytes - unsigned long compression_method; // compression method 2 bytes - unsigned long dosDate; // last mod file date in Dos fmt 4 bytes - unsigned long crc; // crc-32 4 bytes - unsigned long compressed_size; // compressed size 4 bytes - unsigned long uncompressed_size; // uncompressed size 4 bytes - unsigned long size_filename; // filename length 2 bytes - unsigned long size_file_extra; // extra field length 2 bytes - unsigned long size_file_comment; // file comment length 2 bytes - unsigned long disk_num_start; // disk number start 2 bytes - unsigned long internal_fa; // internal file attributes 2 bytes - unsigned long external_fa; // external file attributes 4 bytes - tm_unz tmu_date; -} unz_file_info; - - -#define UNZ_OK (0) -#define UNZ_END_OF_LIST_OF_FILE (-100) -#define UNZ_ERRNO (Z_ERRNO) -#define UNZ_EOF (0) -#define UNZ_PARAMERROR (-102) -#define UNZ_BADZIPFILE (-103) -#define UNZ_INTERNALERROR (-104) -#define UNZ_CRCERROR (-105) - - - - - - - -#define ZLIB_VERSION "1.1.3" - - -// Allowed flush values; see deflate() for details -#define Z_NO_FLUSH 0 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 - - -// compression levels -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) - -// compression strategy; see deflateInit2() for details -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 - -// Possible values of the data_type field -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 - -// The deflate compression method (the only one supported in this version) -#define Z_DEFLATED 8 - -// for initializing zalloc, zfree, opaque -#define Z_NULL 0 - -// case sensitivity when searching for filenames -#define CASE_SENSITIVE 1 -#define CASE_INSENSITIVE 2 - - -// Return codes for the compression/decompression functions. Negative -// values are errors, positive values are used for special but normal events. -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) - - - -// Basic data types -typedef unsigned char Byte; // 8 bits -typedef unsigned int uInt; // 16 bits or more -typedef unsigned long uLong; // 32 bits or more -typedef void *voidpf; -typedef void *voidp; -typedef long z_off_t; - - - - - - - - - - - - -typedef voidpf (*alloc_func) (voidpf opaque, uInt items, uInt size); -typedef void (*free_func) (voidpf opaque, voidpf address); - -struct internal_state; - -typedef struct z_stream_s { - Byte *next_in; // next input byte - uInt avail_in; // number of bytes available at next_in - uLong total_in; // total nb of input bytes read so far - - Byte *next_out; // next output byte should be put there - uInt avail_out; // remaining free space at next_out - uLong total_out; // total nb of bytes output so far - - char *msg; // last error message, NULL if no error - struct internal_state *state; // not visible by applications - - alloc_func zalloc; // used to allocate the internal state - free_func zfree; // used to free the internal state - voidpf opaque; // private data object passed to zalloc and zfree - - int data_type; // best guess about the data type: ascii or binary - uLong adler; // adler32 value of the uncompressed data - uLong reserved; // reserved for future use -} z_stream; - -typedef z_stream *z_streamp; - - -// The application must update next_in and avail_in when avail_in has -// dropped to zero. It must update next_out and avail_out when avail_out -// has dropped to zero. The application must initialize zalloc, zfree and -// opaque before calling the init function. All other fields are set by the -// compression library and must not be updated by the application. -// -// The opaque value provided by the application will be passed as the first -// parameter for calls of zalloc and zfree. This can be useful for custom -// memory management. The compression library attaches no meaning to the -// opaque value. -// -// zalloc must return Z_NULL if there is not enough memory for the object. -// If zlib is used in a multi-threaded application, zalloc and zfree must be -// thread safe. -// -// The fields total_in and total_out can be used for statistics or -// progress reports. After compression, total_in holds the total size of -// the uncompressed data and may be saved for use in the decompressor -// (particularly if the decompressor wants to decompress everything in -// a single step). -// - - -// basic functions - -const char *zlibVersion (); -// The application can compare zlibVersion and ZLIB_VERSION for consistency. -// If the first character differs, the library code actually used is -// not compatible with the zlib.h header file used by the application. -// This check is automatically made by inflateInit. - - - - - - -int inflate (z_streamp strm, int flush); -// -// inflate decompresses as much data as possible, and stops when the input -// buffer becomes empty or the output buffer becomes full. It may some -// introduce some output latency (reading input without producing any output) -// except when forced to flush. -// -// The detailed semantics are as follows. inflate performs one or both of the -// following actions: -// -// - Decompress more input starting at next_in and update next_in and avail_in -// accordingly. If not all input can be processed (because there is not -// enough room in the output buffer), next_in is updated and processing -// will resume at this point for the next call of inflate(). -// -// - Provide more output starting at next_out and update next_out and avail_out -// accordingly. inflate() provides as much output as possible, until there -// is no more input data or no more space in the output buffer (see below -// about the flush parameter). -// -// Before the call of inflate(), the application should ensure that at least -// one of the actions is possible, by providing more input and/or consuming -// more output, and updating the next_* and avail_* values accordingly. -// The application can consume the uncompressed output when it wants, for -// example when the output buffer is full (avail_out == 0), or after each -// call of inflate(). If inflate returns Z_OK and with zero avail_out, it -// must be called again after making room in the output buffer because there -// might be more output pending. -// -// If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much -// output as possible to the output buffer. The flushing behavior of inflate is -// not specified for values of the flush parameter other than Z_SYNC_FLUSH -// and Z_FINISH, but the current implementation actually flushes as much output -// as possible anyway. -// -// inflate() should normally be called until it returns Z_STREAM_END or an -// error. However if all decompression is to be performed in a single step -// (a single call of inflate), the parameter flush should be set to -// Z_FINISH. In this case all pending input is processed and all pending -// output is flushed; avail_out must be large enough to hold all the -// uncompressed data. (The size of the uncompressed data may have been saved -// by the compressor for this purpose.) The next operation on this stream must -// be inflateEnd to deallocate the decompression state. The use of Z_FINISH -// is never required, but can be used to inform inflate that a faster routine -// may be used for the single inflate() call. -// -// If a preset dictionary is needed at this point (see inflateSetDictionary -// below), inflate sets strm-adler to the adler32 checksum of the -// dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise -// it sets strm->adler to the adler32 checksum of all output produced -// so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or -// an error code as described below. At the end of the stream, inflate() -// checks that its computed adler32 checksum is equal to that saved by the -// compressor and returns Z_STREAM_END only if the checksum is correct. -// -// inflate() returns Z_OK if some progress has been made (more input processed -// or more output produced), Z_STREAM_END if the end of the compressed data has -// been reached and all uncompressed output has been produced, Z_NEED_DICT if a -// preset dictionary is needed at this point, Z_DATA_ERROR if the input data was -// corrupted (input stream not conforming to the zlib format or incorrect -// adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent -// (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not -// enough memory, Z_BUF_ERROR if no progress is possible or if there was not -// enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR -// case, the application may then call inflateSync to look for a good -// compression block. -// - - -int inflateEnd (z_streamp strm); -// -// All dynamically allocated data structures for this stream are freed. -// This function discards any unprocessed input and does not flush any -// pending output. -// -// inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state -// was inconsistent. In the error case, msg may be set but then points to a -// static string (which must not be deallocated). - - // Advanced functions - -// The following functions are needed only in some special applications. - - - - - -int inflateSetDictionary (z_streamp strm, - const Byte *dictionary, - uInt dictLength); -// -// Initializes the decompression dictionary from the given uncompressed byte -// sequence. This function must be called immediately after a call of inflate -// if this call returned Z_NEED_DICT. The dictionary chosen by the compressor -// can be determined from the Adler32 value returned by this call of -// inflate. The compressor and decompressor must use exactly the same -// dictionary. -// -// inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a -// parameter is invalid (such as NULL dictionary) or the stream state is -// inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the -// expected one (incorrect Adler32 value). inflateSetDictionary does not -// perform any decompression: this will be done by subsequent calls of -// inflate(). - - -int inflateSync (z_streamp strm); -// -// Skips invalid compressed data until a full flush point can be found, or until all -// available input is skipped. No output is provided. -// -// inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR -// if no more input was provided, Z_DATA_ERROR if no flush point has been found, -// or Z_STREAM_ERROR if the stream structure was inconsistent. In the success -// case, the application may save the current current value of total_in which -// indicates where valid compressed data was found. In the error case, the -// application may repeatedly call inflateSync, providing more input each time, -// until success or end of the input data. - - -int inflateReset (z_streamp strm); -// This function is equivalent to inflateEnd followed by inflateInit, -// but does not free and reallocate all the internal decompression state. -// The stream will keep attributes that may have been set by inflateInit2. -// -// inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source -// stream state was inconsistent (such as zalloc or state being NULL). -// - - - -// checksum functions -// These functions are not related to compression but are exported -// anyway because they might be useful in applications using the -// compression library. - -uLong adler32 (uLong adler, const Byte *buf, uInt len); -// Update a running Adler-32 checksum with the bytes buf[0..len-1] and -// return the updated checksum. If buf is NULL, this function returns -// the required initial value for the checksum. -// An Adler-32 checksum is almost as reliable as a CRC32 but can be computed -// much faster. Usage example: -// -// uLong adler = adler32(0L, Z_NULL, 0); -// -// while (read_buffer(buffer, length) != EOF) { -// adler = adler32(adler, buffer, length); -// } -// if (adler != original_adler) error(); - -uLong ucrc32 (uLong crc, const Byte *buf, uInt len); -// Update a running crc with the bytes buf[0..len-1] and return the updated -// crc. If buf is NULL, this function returns the required initial value -// for the crc. Pre- and post-conditioning (one's complement) is performed -// within this function so it shouldn't be done by the application. -// Usage example: -// -// uLong crc = crc32(0L, Z_NULL, 0); -// -// while (read_buffer(buffer, length) != EOF) { -// crc = crc32(crc, buffer, length); -// } -// if (crc != original_crc) error(); - - - - -const char *zError (int err); -int inflateSyncPoint (z_streamp z); -const uLong *get_crc_table (void); - - - -typedef unsigned char uch; -typedef uch uchf; -typedef unsigned short ush; -typedef ush ushf; -typedef unsigned long ulg; - - - -const char * const z_errmsg[10] = { // indexed by 2-zlib_error -"need dictionary", // Z_NEED_DICT 2 -"stream end", // Z_STREAM_END 1 -"", // Z_OK 0 -"file error", // Z_ERRNO (-1) -"stream error", // Z_STREAM_ERROR (-2) -"data error", // Z_DATA_ERROR (-3) -"insufficient memory", // Z_MEM_ERROR (-4) -"buffer error", // Z_BUF_ERROR (-5) -"incompatible version",// Z_VERSION_ERROR (-6) -""}; - - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -// To be used only when the state is known to be valid - - // common constants - - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -// The three kinds of block type - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -// The minimum and maximum match lengths - -#define PRESET_DICT 0x20 // preset dictionary flag in zlib header - - // target dependencies - -#define OS_CODE 0x0b // Window 95 & Windows NT - - - - // functions - -#define zmemzero(dest, len) memset(dest, 0, len) - -// Diagnostic functions -#undef Assert -#undef Trace -#undef Tracev -#undef Tracevv -#undef Tracec -#undef Tracecv - -#ifdef DEBUG - - int z_verbose = 0; - void z_error (char *m) {fprintf(stderr, "%s\n", m); exit(1);} - -#define Assert(cond,msg) {if(!(cond)) z_error(msg);} -#define Trace(x) {if (z_verbose>=0) fprintf x ;} -#define Tracev(x) {if (z_verbose>0) fprintf x ;} -#define Tracevv(x) {if (z_verbose>1) fprintf x ;} -#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} - -#else - -#ifndef __noop -#if _MSC_VER < 1300 -#define __noop ((void)0) -#endif -#endif - -#define Assert(cond,msg) __noop -#define Trace(x) __noop -#define Tracev(x) __noop -#define Tracevv(x) __noop -#define Tracec(c,x) __noop -#define Tracecv(c,x) __noop - -#endif - - -typedef uLong (*check_func) (uLong check, const Byte *buf, uInt len); -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size); -void zcfree (voidpf opaque, voidpf ptr); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr)) - -//void ZFREE(z_streamp strm,voidpf addr) -//{ *((strm)->zfree))((strm)->opaque, addr); -//} - -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - - - - -// Huffman code lookup table entry--this entry is four bytes for machines -// that have 16-bit pointers (e.g. PC's in the small or medium model). - - -typedef struct inflate_huft_s inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; // number of extra bits or operation - Byte Bits; // number of bits in this code or subcode - } what; - uInt pad; // pad structure to a power of 2 (4 bytes for - } word; // 16-bit, 8 bytes for 32-bit int's) - uInt base; // literal, length base, distance base, or table offset -}; - -// Maximum size of dynamic tree. The maximum found in a long but non- -// exhaustive search was 1004 huft structures (850 for length/literals -// and 154 for distances, the latter actually the result of an -// exhaustive search). The actual maximum is not known, but the -// value below is more than safe. -#define MANY 1440 - -int inflate_trees_bits ( - uInt *, // 19 code lengths - uInt *, // bits tree desired/actual depth - inflate_huft * *, // bits tree result - inflate_huft *, // space for trees - z_streamp); // for messages - -int inflate_trees_dynamic ( - uInt, // number of literal/length codes - uInt, // number of distance codes - uInt *, // that many (total) code lengths - uInt *, // literal desired/actual bit depth - uInt *, // distance desired/actual bit depth - inflate_huft * *, // literal/length tree result - inflate_huft * *, // distance tree result - inflate_huft *, // space for trees - z_streamp); // for messages - -int inflate_trees_fixed ( - uInt *, // literal desired/actual bit depth - uInt *, // distance desired/actual bit depth - const inflate_huft * *, // literal/length tree result - const inflate_huft * *, // distance tree result - z_streamp); // for memory allocation - - - - - -struct inflate_blocks_state; -typedef struct inflate_blocks_state inflate_blocks_statef; - -inflate_blocks_statef * inflate_blocks_new ( - z_streamp z, - check_func c, // check function - uInt w); // window size - -int inflate_blocks ( - inflate_blocks_statef *, - z_streamp , - int); // initial return code - -void inflate_blocks_reset ( - inflate_blocks_statef *, - z_streamp , - uLong *); // check value on output - -int inflate_blocks_free ( - inflate_blocks_statef *, - z_streamp); - -void inflate_set_dictionary ( - inflate_blocks_statef *s, - const Byte *d, // dictionary - uInt n); // dictionary length - -int inflate_blocks_sync_point ( - inflate_blocks_statef *s); - - - - -struct inflate_codes_state; -typedef struct inflate_codes_state inflate_codes_statef; - -inflate_codes_statef *inflate_codes_new ( - uInt, uInt, - const inflate_huft *, const inflate_huft *, - z_streamp ); - -int inflate_codes ( - inflate_blocks_statef *, - z_streamp , - int); - -void inflate_codes_free ( - inflate_codes_statef *, - z_streamp ); - - - - -typedef enum { - IBM_TYPE, // get type bits (3, including end bit) - IBM_LENS, // get lengths for stored - IBM_STORED, // processing stored block - IBM_TABLE, // get table lengths - IBM_BTREE, // get bit lengths tree for a dynamic block - IBM_DTREE, // get length, distance trees for a dynamic block - IBM_CODES, // processing fixed or dynamic block - IBM_DRY, // output remaining window bytes - IBM_DONE, // finished last block, done - IBM_BAD} // got a data error--stuck here -inflate_block_mode; - -// inflate blocks semi-private state -struct inflate_blocks_state { - - // mode - inflate_block_mode mode; // current inflate_block mode - - // mode dependent information - union { - uInt left; // if STORED, bytes left to copy - struct { - uInt table; // table lengths (14 bits) - uInt index; // index into blens (or border) - uInt *blens; // bit lengths of codes - uInt bb; // bit length tree depth - inflate_huft *tb; // bit length decoding tree - } trees; // if DTREE, decoding info for trees - struct { - inflate_codes_statef - *codes; - } decode; // if CODES, current state - } sub; // submode - uInt last; // true if this block is the last block - - // mode independent information - uInt bitk; // bits in bit buffer - uLong bitb; // bit buffer - inflate_huft *hufts; // single malloc for tree space - Byte *window; // sliding window - Byte *end; // one byte after sliding window - Byte *read; // window read pointer - Byte *write; // window write pointer - check_func checkfn; // check function - uLong check; // check on output - -}; - - -// defines for inflate input/output -// update pointers and return -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=(uLong)(p-z->next_in);z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -// get bytes and bits -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} -// output bytes -#define WAVAIL (uInt)(qread?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=(uInt)WAVAIL;m;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -// load local pointers -#define LOAD {LOADIN LOADOUT} - -// masks for lower bits (size given to avoid silly warnings with Visual C++) -// And'ing with mask[n] masks the lower n bits -const uInt inflate_mask[17] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; - -// copy as much as possible from the sliding window to the output area -int inflate_flush (inflate_blocks_statef *, z_streamp, int); - -int inflate_fast (uInt, uInt, const inflate_huft *, const inflate_huft *, inflate_blocks_statef *, z_streamp ); - - - -const uInt fixed_bl = 9; -const uInt fixed_bd = 5; -const inflate_huft fixed_tl[] = { - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} - }; -const inflate_huft fixed_td[] = { - {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, - {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, - {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, - {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, - {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, - {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, - {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, - {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} - }; - - - - - - - -// copy as much as possible from the sliding window to the output area -int inflate_flush(inflate_blocks_statef *s,z_streamp z,int r) -{ - uInt n; - Byte *p; - Byte *q; - - // local copies of source and destination pointers - p = z->next_out; - q = s->read; - - // compute number of bytes to copy as far as end of window - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - // update counters - z->avail_out -= n; - z->total_out += n; - - // update check information - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - // copy as far as end of window - if (n!=0) // check for n!=0 to avoid waking up CodeGuard - { memcpy(p, q, n); - p += n; - q += n; - } - - // see if more to copy at beginning of window - if (q == s->end) - { - // wrap pointers - q = s->window; - if (s->write == s->end) - s->write = s->window; - - // compute bytes to copy - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - // update counters - z->avail_out -= n; - z->total_out += n; - - // update check information - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - // copy - memcpy(p, q, n); - p += n; - q += n; - } - - // update pointers - z->next_out = p; - s->read = q; - - // done - return r; -} - - - - - - -// simplify the use of the inflate_huft type with some defines -#define exop word.what.Exop -#define bits word.what.Bits - -typedef enum { // waiting for "i:"=input, "o:"=output, "x:"=nothing - START, // x: set up for LEN - LEN, // i: get length/literal/eob next - LENEXT, // i: getting length extra (have base) - DIST, // i: get distance next - DISTEXT, // i: getting distance extra - COPY, // o: copying bytes in window, waiting for space - LIT, // o: got literal, waiting for output space - WASH, // o: got eob, possibly still output waiting - END, // x: got eob and all data flushed - BADCODE} // x: got error -inflate_codes_mode; - -// inflate codes private state -struct inflate_codes_state { - - // mode - inflate_codes_mode mode; // current inflate_codes mode - - // mode dependent information - uInt len; - union { - struct { - const inflate_huft *tree; // pointer into tree - uInt need; // bits needed - } code; // if LEN or DIST, where in tree - uInt lit; // if LIT, literal - struct { - uInt get; // bits to get for extra - uInt dist; // distance back to copy from - } copy; // if EXT or COPY, where and how much - } sub; // submode - - // mode independent information - Byte lbits; // ltree bits decoded per branch - Byte dbits; // dtree bits decoder per branch - const inflate_huft *ltree; // literal/length/eob tree - const inflate_huft *dtree; // distance tree - -}; - - -inflate_codes_statef *inflate_codes_new( -uInt bl, uInt bd, -const inflate_huft *tl, -const inflate_huft *td, // need separate declaration for Borland C++ -z_streamp z) -{ - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev((stderr, "inflate: codes new\n")); - } - return c; -} - - -int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt j; // temporary storage - const inflate_huft *t; // temporary pointer - uInt e; // extra bits or operation - uLong b; // bit buffer - uInt k; // bits in bit buffer - Byte *p; // input data pointer - uInt n; // bytes available there - Byte *q; // output window write pointer - uInt m; // bytes to end of window or read pointer - Byte *f; // pointer to copy strings from - inflate_codes_statef *c = s->sub.decode.codes; // codes state - - // copy input/output information to locals (UPDATE macro restores) - LOAD - - // process input and output based on current state - for(;;) switch (c->mode) - { // waiting for "i:"=input, "o:"=output, "x:"=nothing - case START: // x: set up for LEN -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif // !SLOW - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: // i: get length/literal/eob next - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) // literal - { - c->sub.lit = t->base; - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) // length - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) // next table - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - if (e & 32) // end of block - { - Tracevv((stderr, "inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; // invalid code - z->msg = (char*)"invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: // i: getting length extra (have base) - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv((stderr, "inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: // i: get distance next - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) // distance - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) // next table - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - c->mode = BADCODE; // invalid code - z->msg = (char*)"invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: // i: getting distance extra - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: // o: copying bytes in window, waiting for space - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: // o: got literal, waiting for output space - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: // o: got eob, possibly more output - if (k > 7) // return unused byte, if any - { - Assert(k < 16, "inflate_codes grabbed too many bytes"); - k -= 8; - n++; - p--; // can always return one - } - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: // x: got error - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -void inflate_codes_free(inflate_codes_statef *c,z_streamp z) -{ ZFREE(z, c); - Tracev((stderr, "inflate: codes free\n")); -} - - - -// infblock.c -- interpret and process block types to last block -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h - -//struct inflate_codes_state {int dummy;}; // for buggy compilers - - - -// Table for deflate from PKZIP's appnote.txt. -const uInt border[] = { // Order of the bit length code lengths - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - -// -// Notes beyond the 1.93a appnote.txt: -// -// 1. Distance pointers never point before the beginning of the output stream. -// 2. Distance pointers can point back across blocks, up to 32k away. -// 3. There is an implied maximum of 7 bits for the bit length table and -// 15 bits for the actual data. -// 4. If only one code exists, then it is encoded using one bit. (Zero -// would be more efficient, but perhaps a little confusing.) If two -// codes exist, they are coded using one bit each (0 and 1). -// 5. There is no way of sending zero distance codes--a dummy must be -// sent if there are none. (History: a pre 2.0 version of PKZIP would -// store blocks with no distance codes, but this was discovered to be -// too harsh a criterion.) Valid only for 1.93a. 2.04c does allow -// zero distance codes, which is sent as one code of zero bits in -// length. -// 6. There are up to 286 literal/length codes. Code 256 represents the -// end-of-block. Note however that the static length tree defines -// 288 codes just to fill out the Huffman codes. Codes 286 and 287 -// cannot be used though, since there is no length base or extra bits -// defined for them. Similarily, there are up to 30 distance codes. -// However, static trees define 32 codes (all 5 bits) to fill out the -// Huffman codes, but the last two had better not show up in the data. -// 7. Unzip can check dynamic Huffman blocks for complete code sets. -// The exception is that a single code would not be complete (see #4). -// 8. The five bits following the block type is really the number of -// literal codes sent minus 257. -// 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits -// (1+6+6). Therefore, to output three times the length, you output -// three codes (1+1+1), whereas to output four times the same length, -// you only need two codes (1+3). Hmm. -//10. In the tree reconstruction algorithm, Code = Code + Increment -// only if BitLength(i) is not zero. (Pretty obvious.) -//11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) -//12. Note: length code 284 can represent 227-258, but length code 285 -// really is 258. The last length deserves its own, short code -// since it gets used a lot in very redundant files. The length -// 258 is special since 258 - 3 (the min match length) is 255. -//13. The literal/length and distance code bit lengths are read as a -// single stream of lengths. It is possible (and advantageous) for -// a repeat code (16, 17, or 18) to go across the boundary between -// the two sets of lengths. - - -void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c) -{ - if (c != Z_NULL) - *c = s->check; - if (s->mode == IBM_BTREE || s->mode == IBM_DTREE) - ZFREE(z, s->sub.trees.blens); - if (s->mode == IBM_CODES) - inflate_codes_free(s->sub.decode.codes, z); - s->mode = IBM_TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0); - Tracev((stderr, "inflate: blocks reset\n")); -} - - -inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w) -{ - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->hufts = - (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) - { - ZFREE(z, s); - return Z_NULL; - } - if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s->hufts); - ZFREE(z, s); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = IBM_TYPE; - Tracev((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, Z_NULL); - return s; -} - - -int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt t; // temporary storage - uLong b; // bit buffer - uInt k; // bits in bit buffer - Byte *p; // input data pointer - uInt n; // bytes available there - Byte *q; // output window write pointer - uInt m; // bytes to end of window or read pointer - - // copy input/output information to locals (UPDATE macro restores) - LOAD - - // process input based on current state - for(;;) switch (s->mode) - { - case IBM_TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: // stored - Tracev((stderr, "inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; // go to byte boundary - DUMPBITS(t) - s->mode = IBM_LENS; // get length of stored block - break; - case 1: // fixed - Tracev((stderr, "inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - const inflate_huft *tl, *td; - - inflate_trees_fixed(&bl, &bd, &tl, &td, z); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - } - DUMPBITS(3) - s->mode = IBM_CODES; - break; - case 2: // dynamic - Tracev((stderr, "inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = IBM_TABLE; - break; - case 3: // illegal - DUMPBITS(3) - s->mode = IBM_BAD; - z->msg = (char*)"invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case IBM_LENS: - NEEDBITS(32) - if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) - { - s->mode = IBM_BAD; - z->msg = (char*)"invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; // dump bits - Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? IBM_STORED : (s->last ? IBM_DRY : IBM_TYPE); - break; - case IBM_STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - memcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev((stderr, "inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? IBM_DRY : IBM_TYPE; - break; - case IBM_TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; - // remove this section to workaround bug in pkzip - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = IBM_BAD; - z->msg = (char*)"too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } - // end remove - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev((stderr, "inflate: table sizes ok\n")); - s->mode = IBM_BTREE; - case IBM_BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, s->hufts, z); - if (t != Z_OK) - { - ZFREE(z, s->sub.trees.blens); - r = t; - if (r == Z_DATA_ERROR) - s->mode = IBM_BAD; - LEAVE - } - s->sub.trees.index = 0; - Tracev((stderr, "inflate: bits tree ok\n")); - s->mode = IBM_DTREE; - case IBM_DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->bits; - c = h->base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else // c == 16..18 - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - ZFREE(z, s->sub.trees.blens); - s->mode = IBM_BAD; - z->msg = (char*)"invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - bl = 9; // must be <= 9 for lookahead assumptions - bd = 6; // must be <= 9 for lookahead assumptions - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, - s->hufts, z); - ZFREE(z, s->sub.trees.blens); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = IBM_BAD; - r = t; - LEAVE - } - Tracev((stderr, "inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.codes = c; - } - s->mode = IBM_CODES; - case IBM_CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - LOAD - Tracev((stderr, "inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = IBM_TYPE; - break; - } - s->mode = IBM_DRY; - case IBM_DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = IBM_DONE; - case IBM_DONE: - r = Z_STREAM_END; - LEAVE - case IBM_BAD: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -} - - -int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z) -{ - inflate_blocks_reset(s, z, Z_NULL); - ZFREE(z, s->window); - ZFREE(z, s->hufts); - ZFREE(z, s); - Tracev((stderr, "inflate: blocks freed\n")); - return Z_OK; -} - - - -// inftrees.c -- generate Huffman trees for efficient decoding -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h -// - - - -extern const char inflate_copyright[] = - " ";//inflate 1.1.3 Copyright 1995-1998 Mark Adler "; -// If you use the zlib library in a product, an acknowledgment is welcome -// in the documentation of your product. If for some reason you cannot -// include such an acknowledgment, I would appreciate that you keep this -// copyright string in the executable of your product. - - - -int huft_build ( - uInt *, // code lengths in bits - uInt, // number of codes - uInt, // number of "simple" codes - const uInt *, // list of base values for non-simple codes - const uInt *, // list of extra bits for non-simple codes - inflate_huft **,// result: starting table - uInt *, // maximum lookup bits (returns actual) - inflate_huft *, // space for trees - uInt *, // hufts used in space - uInt * ); // space for values - -// Tables for deflate from PKZIP's appnote.txt. -const uInt cplens[31] = { // Copy lengths for literal codes 257..285 - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - // see note #13 above about 258 -const uInt cplext[31] = { // Extra bits for literal codes 257..285 - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; // 112==invalid -const uInt cpdist[30] = { // Copy offsets for distance codes 0..29 - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -const uInt cpdext[30] = { // Extra bits for distance codes - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; - -// -// Huffman code decoding is performed using a multi-level table lookup. -// The fastest way to decode is to simply build a lookup table whose -// size is determined by the longest code. However, the time it takes -// to build this table can also be a factor if the data being decoded -// is not very long. The most common codes are necessarily the -// shortest codes, so those codes dominate the decoding time, and hence -// the speed. The idea is you can have a shorter table that decodes the -// shorter, more probable codes, and then point to subsidiary tables for -// the longer codes. The time it costs to decode the longer codes is -// then traded against the time it takes to make longer tables. -// -// This results of this trade are in the variables lbits and dbits -// below. lbits is the number of bits the first level table for literal/ -// length codes can decode in one step, and dbits is the same thing for -// the distance codes. Subsequent tables are also less than or equal to -// those sizes. These values may be adjusted either when all of the -// codes are shorter than that, in which case the longest code length in -// bits is used, or when the shortest code is *longer* than the requested -// table size, in which case the length of the shortest code in bits is -// used. -// -// There are two different values for the two tables, since they code a -// different number of possibilities each. The literal/length table -// codes 286 possible values, or in a flat code, a little over eight -// bits. The distance table codes 30 possible values, or a little less -// than five bits, flat. The optimum values for speed end up being -// about one bit more than those, so lbits is 8+1 and dbits is 5+1. -// The optimum values may differ though from machine to machine, and -// possibly even between compilers. Your mileage may vary. -// - - -// If BMAX needs to be larger than 16, then h and x[] should be uLong. -#define BMAX 15 // maximum bit length of any code - -int huft_build( -uInt *b, // code lengths in bits (all assumed <= BMAX) -uInt n, // number of codes (assumed <= 288) -uInt s, // number of simple-valued codes (0..s-1) -const uInt *d, // list of base values for non-simple codes -const uInt *e, // list of extra bits for non-simple codes -inflate_huft * *t, // result: starting table -uInt *m, // maximum lookup bits, returns actual -inflate_huft *hp, // space for trees -uInt *hn, // hufts used in space -uInt *v) // working area: values in order of bit length -// Given a list of code lengths and a maximum table size, make a set of -// tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR -// if the given code set is incomplete (the tables are still built in this -// case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of -// lengths), or Z_MEM_ERROR if not enough memory. -{ - - uInt a; // counter for codes of length k - uInt c[BMAX+1]; // bit length count table - uInt f; // i repeats in table every f entries - int g; // maximum code length - int h; // table level - register uInt i; // counter, current code - register uInt j; // counter - register int k; // number of bits in current code - int l; // bits per table (returned in m) - uInt mask; // (1 << w) - 1, to avoid cc -O bug on HP - register uInt *p; // pointer into c[], b[], or v[] - inflate_huft *q; // points to current table - struct inflate_huft_s r; // table entry for structure assignment - inflate_huft *u[BMAX]; // table stack - register int w; // bits before this table == (l * h) - uInt x[BMAX+1]; // bit offsets, then code stack - uInt *xp; // pointer into x - int y; // number of dummy codes added - uInt z; // number of entries in current table - - - // Generate counts for each bit length - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4; p; // clear c[]--assume BMAX+1 is 16 - p = b; i = n; - do { - c[*p++]++; // assume all entries <= BMAX - } while (--i); - if (c[0] == n) // null input--all zero length codes - { - *t = (inflate_huft *)Z_NULL; - *m = 0; - return Z_OK; - } - - - // Find minimum and maximum length, bound *m by those - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; // minimum code length - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; // maximum code length - if ((uInt)l > i) - l = i; - *m = l; - - - // Adjust last length count to fill out codes, if needed - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - // Generate starting offsets into the value table for each length - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { // note that i == g from above - *xp++ = (j += *p++); - } - - - // Make a table of values in order of bit lengths - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - n = x[g]; // set n to length of v - - - // Generate the Huffman codes and for each, make the table entries - x[0] = i = 0; // first Huffman code is zero - p = v; // grab values in bit order - h = -1; // no tables yet--level -1 - w = -l; // bits decoded == (l * h) - u[0] = (inflate_huft *)Z_NULL; // just to keep compilers happy - q = (inflate_huft *)Z_NULL; // ditto - z = 0; // ditto - - // go through the bit lengths (k already is bits in shortest code) - for (; k <= g; k++) - { - a = c[k]; - while (a--) - { - // here i is the Huffman code of length k bits for value *p - // make tables up to required level - while (k > w + l) - { - h++; - w += l; // previous table always l bits - - // compute minimum size table less than or equal to l bits - z = g - w; - z = z > (uInt)l ? l : z; // table size upper limit - if ((f = 1 << (j = k - w)) > a + 1) // try a k-w bit table - { // too few codes for k-w bit table - f -= a + 1; // deduct codes from patterns left - xp = c + k; - if (j < z) - while (++j < z) // try smaller tables up to z bits - { - if ((f <<= 1) <= *++xp) - break; // enough codes to use up j bits - f -= *xp; // else deduct codes from patterns - } - } - z = 1 << j; // table entries for j-bit table - - // allocate new table - if (*hn + z > MANY) // (note: doesn't matter for fixed) - return Z_MEM_ERROR; // not enough memory - u[h] = q = hp + *hn; - *hn += z; - - // connect to last table, if there is one - if (h) - { - x[h] = i; // save pattern for backing up - r.bits = (Byte)l; // bits to dump before this table - r.exop = (Byte)j; // bits in this table - j = i >> (w - l); - r.base = (uInt)(q - u[h-1] - j); // offset to this table - u[h-1][j] = r; // connect to last table - } - else - *t = q; // first table is returned result - } - - // set up table entry in r - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; // out of values--invalid code - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); // 256 is end-of-block - r.base = *p++; // simple code is just the value - } - else - { - r.exop = (Byte)(e[*p - s] + 16 + 64);// non-simple--look up in lists - r.base = d[*p++ - s]; - } - - // fill code-like entries with r - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; - - // backwards increment the k-bit code i - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; - - // backup over finished tables - mask = (1 << w) - 1; // needed on HP, cc -O bug - while ((i & mask) != x[h]) - { - h--; // don't need to update q - w -= l; - mask = (1 << w) - 1; - } - } - } - - - // Return Z_BUF_ERROR if we were given an incomplete table - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} - - -int inflate_trees_bits( -uInt *c, // 19 code lengths -uInt *bb, // bits tree desired/actual depth -inflate_huft * *tb, // bits tree result -inflate_huft *hp, // space for trees -z_streamp z) // for messages -{ - int r; - uInt hn = 0; // hufts used in space - uInt *v; // work area for huft_build - - if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL, - tb, bb, hp, &hn, v); - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR || *bb == 0) - { - z->msg = (char*)"incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; -} - - -int inflate_trees_dynamic( -uInt nl, // number of literal/length codes -uInt nd, // number of distance codes -uInt *c, // that many (total) code lengths -uInt *bl, // literal desired/actual bit depth -uInt *bd, // distance desired/actual bit depth -inflate_huft * *tl, // literal/length tree result -inflate_huft * *td, // distance tree result -inflate_huft *hp, // space for trees -z_streamp z) // for messages -{ - int r; - uInt hn = 0; // hufts used in space - uInt *v; // work area for huft_build - - // allocate work area - if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - - // build literal/length tree - r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); - if (r != Z_OK || *bl == 0) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; - } - - // build distance tree - r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); - if (r != Z_OK || (*bd == 0 && nl > 257)) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed distance tree"; - else if (r == Z_BUF_ERROR) { - z->msg = (char*)"incomplete distance tree"; - r = Z_DATA_ERROR; - } - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"empty distance tree with lengths"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; - } - - // done - ZFREE(z, v); - return Z_OK; -} - - - - - -int inflate_trees_fixed( -uInt *bl, // literal desired/actual bit depth -uInt *bd, // distance desired/actual bit depth -const inflate_huft * * tl, // literal/length tree result -const inflate_huft * *td, // distance tree result -z_streamp ) // for memory allocation -{ - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; -} - - -// inffast.c -- process literals and length/distance pairs fast -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h -// - - -//struct inflate_codes_state {int dummy;}; // for buggy compilers - - -// macros for bit input with no checking and for returning unused bytes -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<avail_in-n;c=(k>>3)>3:c;n+=c;p-=c;k-=c<<3;} - -// Called with number of bytes left to write in window at least 258 -// (the maximum string length) and number of input bytes available -// at least ten. The ten bytes are six bytes for the longest length/ -// distance pair plus four bytes for overloading the bit buffer. - -int inflate_fast( -uInt bl, uInt bd, -const inflate_huft *tl, -const inflate_huft *td, // need separate declaration for Borland C++ -inflate_blocks_statef *s, -z_streamp z) -{ - const inflate_huft *t; // temporary pointer - uInt e; // extra bits or operation - uLong b; // bit buffer - uInt k; // bits in bit buffer - Byte *p; // input data pointer - uInt n; // bytes available there - Byte *q; // output window write pointer - uInt m; // bytes to end of window or read pointer - uInt ml; // mask for literal/length tree - uInt md; // mask for distance tree - uInt c; // bytes to copy - uInt d; // distance back to copy from - Byte *r; // copy source pointer - - // load input, output, bit values - LOAD - - // initialize masks - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - // do until not enough input or output space for fast loop - do { // assume called with m >= 258 && n >= 10 - // get literal/length code - GRABBITS(20) // max bits for literal/length code - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - for (;;) { - DUMPBITS(t->bits) - if (e & 16) - { - // get extra bits for length - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * length %u\n", c)); - - // decode distance base of block to copy - GRABBITS(15); // max bits for distance code - e = (t = td + ((uInt)b & md))->exop; - for (;;) { - DUMPBITS(t->bits) - if (e & 16) - { - // get extra bits to add to distance base - e &= 15; - GRABBITS(e) // get extra bits (up to 13) - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv((stderr, "inflate: * distance %u\n", d)); - - // do the copy - m -= c; - if ((uInt)(q - s->window) >= d) // offset before dest - { // just copy - r = q - d; - *q++ = *r++; c--; // minimum count is three, - *q++ = *r++; c--; // so unroll loop a little - } - else // else offset after destination - { - e = d - (uInt)(q - s->window); // bytes from offset to end - r = s->end - e; // pointer to offset - if (c > e) // if source crosses, - { - c -= e; // copy to end of window - do { - *q++ = *r++; - } while (--e); - r = s->window; // copy rest from start of window - } - } - do { // copy all or what's left - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - { - t += t->base; - e = (t += ((uInt)b & inflate_mask[e]))->exop; - } - else - { - z->msg = (char*)"invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - }; - break; - } - if ((e & 64) == 0) - { - t += t->base; - if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv((stderr, "inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = (char*)"invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - }; - } while (m >= 258 && n >= 10); - - // not enough input or output--restore pointers and return - UNGRAB - UPDATE - return Z_OK; -} - - - - - - -// crc32.c -- compute the CRC-32 of a data stream -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h - -// @(#) $Id$ - - - - - - -// Table of CRC-32's of all single-byte values (made by make_crc_table) -const uLong crc_table[256] = { - 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, - 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, - 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, - 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, - 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, - 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, - 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, - 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, - 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, - 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, - 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, - 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, - 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, - 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, - 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, - 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, - 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, - 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, - 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, - 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, - 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, - 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, - 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, - 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, - 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, - 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, - 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, - 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, - 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, - 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, - 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, - 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, - 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, - 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, - 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, - 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, - 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, - 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, - 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, - 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, - 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, - 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, - 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, - 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, - 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, - 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, - 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, - 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, - 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, - 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, - 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, - 0x2d02ef8dL -}; - -const uLong * get_crc_table() -{ return (const uLong *)crc_table; -} - -#define CRC_DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); -#define CRC_DO2(buf) CRC_DO1(buf); CRC_DO1(buf); -#define CRC_DO4(buf) CRC_DO2(buf); CRC_DO2(buf); -#define CRC_DO8(buf) CRC_DO4(buf); CRC_DO4(buf); - -uLong ucrc32(uLong crc, const Byte *buf, uInt len) -{ if (buf == Z_NULL) return 0L; - crc = crc ^ 0xffffffffL; - while (len >= 8) {CRC_DO8(buf); len -= 8;} - if (len) do {CRC_DO1(buf);} while (--len); - return crc ^ 0xffffffffL; -} - - -// adler32.c -- compute the Adler-32 checksum of a data stream -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h - -// @(#) $Id$ - - -#define BASE 65521L // largest prime smaller than 65536 -#define NMAX 5552 -// NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 - -#define AD_DO1(buf,i) {s1 += buf[i]; s2 += s1;} -#define AD_DO2(buf,i) AD_DO1(buf,i); AD_DO1(buf,i+1); -#define AD_DO4(buf,i) AD_DO2(buf,i); AD_DO2(buf,i+2); -#define AD_DO8(buf,i) AD_DO4(buf,i); AD_DO4(buf,i+4); -#define AD_DO16(buf) AD_DO8(buf,0); AD_DO8(buf,8); - -// ========================================================================= -uLong adler32(uLong adler, const Byte *buf, uInt len) -{ - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - AD_DO16(buf); - buf += 16; - k -= 16; - } - if (k != 0) do { - s1 += *buf++; - s2 += s1; - } while (--k); - s1 %= BASE; - s2 %= BASE; - } - return (s2 << 16) | s1; -} - - - -// zutil.c -- target dependent utility functions for the compression library -// Copyright (C) 1995-1998 Jean-loup Gailly. -// For conditions of distribution and use, see copyright notice in zlib.h -// @(#) $Id$ - - - - - - -const char * zlibVersion() -{ - return ZLIB_VERSION; -} - -// exported to allow conversion of error code to string for compress() and -// uncompress() -const char * zError(int err) -{ return ERR_MSG(err); -} - - - - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - if (opaque) items += size - size; // make compiler happy - return (voidpf)calloc(items, size); -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - zfree(ptr); - if (opaque) return; // make compiler happy -} - - - -// inflate.c -- zlib interface to inflate modules -// Copyright (C) 1995-1998 Mark Adler -// For conditions of distribution and use, see copyright notice in zlib.h - -//struct inflate_blocks_state {int dummy;}; // for buggy compilers - -typedef enum { - IM_METHOD, // waiting for method byte - IM_FLAG, // waiting for flag byte - IM_DICT4, // four dictionary check bytes to go - IM_DICT3, // three dictionary check bytes to go - IM_DICT2, // two dictionary check bytes to go - IM_DICT1, // one dictionary check byte to go - IM_DICT0, // waiting for inflateSetDictionary - IM_BLOCKS, // decompressing blocks - IM_CHECK4, // four check bytes to go - IM_CHECK3, // three check bytes to go - IM_CHECK2, // two check bytes to go - IM_CHECK1, // one check byte to go - IM_DONE, // finished check, done - IM_BAD} // got an error--stay here -inflate_mode; - -// inflate private state -struct internal_state { - - // mode - inflate_mode mode; // current inflate mode - - // mode dependent information - union { - uInt method; // if IM_FLAGS, method byte - struct { - uLong was; // computed check value - uLong need; // stream check value - } check; // if CHECK, check values to compare - uInt marker; // if IM_BAD, inflateSync's marker bytes count - } sub; // submode - - // mode independent information - int nowrap; // flag for no wrapper - uInt wbits; // log2(window size) (8..15, defaults to 15) - inflate_blocks_statef - *blocks; // current inflate_blocks state - -}; - -int inflateReset(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? IM_BLOCKS : IM_METHOD; - inflate_blocks_reset(z->state->blocks, z, Z_NULL); - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int inflateEnd(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z); - ZFREE(z, z->state); - z->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - - -int inflateInit2(z_streamp z) -{ const char *version = ZLIB_VERSION; int stream_size = sizeof(z_stream); - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || stream_size != sizeof(z_stream)) return Z_VERSION_ERROR; - - int w = -15; // MAX_WBITS: 32K LZ77 window. - // Warning: reducing MAX_WBITS makes minigzip unable to extract .gz files created by gzip. - // The memory requirements for deflate are (in bytes): - // (1 << (windowBits+2)) + (1 << (memLevel+9)) - // that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - // plus a few kilobytes for small objects. For example, if you want to reduce - // the default memory requirements from 256K to 128K, compile with - // make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - // Of course this will generally degrade compression (there's no free lunch). - // - // The memory requirements for inflate are (in bytes) 1 << windowBits - // that is, 32K for windowBits=15 (default value) plus a few kilobytes - // for small objects. - - // initialize state - if (z == Z_NULL) return Z_STREAM_ERROR; - z->msg = Z_NULL; - if (z->zalloc == Z_NULL) - { - z->zalloc = zcalloc; - z->opaque = (voidpf)0; - } - if (z->zfree == Z_NULL) z->zfree = zcfree; - if ((z->state = (struct internal_state *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - // handle undocumented nowrap option (no zlib header or check) - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - // set window size - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - // create inflate_blocks state - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Tracev((stderr, "inflate: allocated\n")); - - // reset state - inflateReset(z); - return Z_OK; -} - - - -#define IM_NEEDBYTE {if(z->avail_in==0)return r;r=f;} -#define IM_NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) - -int inflate(z_streamp z, int f) -{ - int r; - uInt b; - - if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) - return Z_STREAM_ERROR; - f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; - r = Z_BUF_ERROR; - for (;;) switch (z->state->mode) - { - case IM_METHOD: - IM_NEEDBYTE - if (((z->state->sub.method = IM_NEXTBYTE) & 0xf) != Z_DEFLATED) - { - z->state->mode = IM_BAD; - z->msg = (char*)"unknown compression method"; - z->state->sub.marker = 5; // can't try inflateSync - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = IM_BAD; - z->msg = (char*)"invalid window size"; - z->state->sub.marker = 5; // can't try inflateSync - break; - } - z->state->mode = IM_FLAG; - case IM_FLAG: - IM_NEEDBYTE - b = IM_NEXTBYTE; - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = IM_BAD; - z->msg = (char*)"incorrect header check"; - z->state->sub.marker = 5; // can't try inflateSync - break; - } - Tracev((stderr, "inflate: zlib header ok\n")); - if (!(b & PRESET_DICT)) - { - z->state->mode = IM_BLOCKS; - break; - } - z->state->mode = IM_DICT4; - case IM_DICT4: - IM_NEEDBYTE - z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24; - z->state->mode = IM_DICT3; - case IM_DICT3: - IM_NEEDBYTE - z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16; - z->state->mode = IM_DICT2; - case IM_DICT2: - IM_NEEDBYTE - z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8; - z->state->mode = IM_DICT1; - case IM_DICT1: - IM_NEEDBYTE; r; - z->state->sub.check.need += (uLong)IM_NEXTBYTE; - z->adler = z->state->sub.check.need; - z->state->mode = IM_DICT0; - return Z_NEED_DICT; - case IM_DICT0: - z->state->mode = IM_BAD; - z->msg = (char*)"need dictionary"; - z->state->sub.marker = 0; // can try inflateSync - return Z_STREAM_ERROR; - case IM_BLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (r == Z_DATA_ERROR) - { - z->state->mode = IM_BAD; - z->state->sub.marker = 0; // can try inflateSync - break; - } - if (r == Z_OK) - r = f; - if (r != Z_STREAM_END) - return r; - r = f; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = IM_DONE; - break; - } - z->state->mode = IM_CHECK4; - case IM_CHECK4: - IM_NEEDBYTE - z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24; - z->state->mode = IM_CHECK3; - case IM_CHECK3: - IM_NEEDBYTE - z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16; - z->state->mode = IM_CHECK2; - case IM_CHECK2: - IM_NEEDBYTE - z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8; - z->state->mode = IM_CHECK1; - case IM_CHECK1: - IM_NEEDBYTE - z->state->sub.check.need += (uLong)IM_NEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = IM_BAD; - z->msg = (char*)"incorrect data check"; - z->state->sub.marker = 5; // can't try inflateSync - break; - } - Tracev((stderr, "inflate: zlib check ok\n")); - z->state->mode = IM_DONE; - case IM_DONE: - return Z_STREAM_END; - case IM_BAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } -} - - - -#ifdef _UNICODE - -static int GetAnsiFileName(LPCWSTR name, char * buf, int nBufSize) -{ - memset(buf, 0, nBufSize); - - int n = WideCharToMultiByte(CP_ACP, // code page - 0, // performance and mapping flags - name, // wide-character string - -1, // number of chars in string - buf, // buffer for new string - nBufSize, // size of buffer - NULL, // default for unmappable chars - NULL); // set when default char used - return n; -} - -static int GetUnicodeFileName(const char * name, LPWSTR buf, int nBufSize) -{ - memset(buf, 0, nBufSize*sizeof(TCHAR)); - - int n = MultiByteToWideChar(CP_ACP, // code page - 0, // character-type options - name, // string to map - -1, // number of bytes in string - buf, // wide-character buffer - nBufSize); // size of buffer - - return n; -} - -#endif - - -// unzip.c -- IO on .zip files using zlib -// Version 0.15 beta, Mar 19th, 1998, -// Read unzip.h for more info - - - - -#define UNZ_BUFSIZE (16384) -#define UNZ_MAXFILENAMEINZIP (256) -#define SIZECENTRALDIRITEM (0x2e) -#define SIZEZIPLOCALHEADER (0x1e) - - - - -const char unz_copyright[] = " ";//unzip 0.15 Copyright 1998 Gilles Vollant "; - -// unz_file_info_interntal contain internal info about a file in zipfile -typedef struct unz_file_info_internal_s -{ - uLong offset_curfile;// relative offset of local header 4 bytes -} unz_file_info_internal; - - -typedef struct -{ bool is_handle; // either a handle or memory - bool canseek; - // for handles: - HANDLE h; bool herr; unsigned long initial_offset; - // for memory: - void *buf; unsigned int len,pos; // if it's a memory block -} LUFILE; - - -LUFILE *lufopen(void *z,unsigned int len,DWORD flags,ZRESULT *err) -{ - if (flags!=ZIP_HANDLE && flags!=ZIP_FILENAME && flags!=ZIP_MEMORY) - { - *err=ZR_ARGS; - return NULL; - } - // - HANDLE h=0; bool canseek=false; *err=ZR_OK; - if (flags==ZIP_HANDLE||flags==ZIP_FILENAME) - { - if (flags==ZIP_HANDLE) - { - HANDLE hf = z; - - BOOL res = DuplicateHandle(GetCurrentProcess(),hf,GetCurrentProcess(),&h,0,FALSE,DUPLICATE_SAME_ACCESS); - - if (!res) - { - *err=ZR_NODUPH; - return NULL; - } - } - else - { - h = CreateFile((const TCHAR *)z, GENERIC_READ, FILE_SHARE_READ, - NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); - - if (h == INVALID_HANDLE_VALUE) - { - *err = ZR_NOFILE; - return NULL; - } - } - DWORD type = GetFileType(h); - canseek = (type==FILE_TYPE_DISK); - } - LUFILE *lf = new LUFILE; - if (flags==ZIP_HANDLE||flags==ZIP_FILENAME) - { - lf->is_handle=true; - lf->canseek=canseek; - lf->h=h; lf->herr=false; - lf->initial_offset=0; - if (canseek) - lf->initial_offset = SetFilePointer(h,0,NULL,FILE_CURRENT); - } - else - { - lf->is_handle=false; - lf->canseek=true; - lf->buf=z; - lf->len=len; - lf->pos=0; - lf->initial_offset=0; - } - *err=ZR_OK; - return lf; -} - - -int lufclose(LUFILE *stream) -{ if (stream==NULL) return EOF; - if (stream->is_handle) CloseHandle(stream->h); - delete stream; - return 0; -} - -int luferror(LUFILE *stream) -{ if (stream->is_handle && stream->herr) return 1; - else return 0; -} - -long int luftell(LUFILE *stream) -{ if (stream->is_handle && stream->canseek) return SetFilePointer(stream->h,0,NULL,FILE_CURRENT)-stream->initial_offset; - else if (stream->is_handle) return 0; - else return stream->pos; -} - -int lufseek(LUFILE *stream, long offset, int whence) -{ if (stream->is_handle && stream->canseek) - { if (whence==SEEK_SET) SetFilePointer(stream->h,stream->initial_offset+offset,0,FILE_BEGIN); - else if (whence==SEEK_CUR) SetFilePointer(stream->h,offset,NULL,FILE_CURRENT); - else if (whence==SEEK_END) SetFilePointer(stream->h,offset,NULL,FILE_END); - else return 19; // EINVAL - return 0; - } - else if (stream->is_handle) return 29; // ESPIPE - else - { if (whence==SEEK_SET) stream->pos=offset; - else if (whence==SEEK_CUR) stream->pos+=offset; - else if (whence==SEEK_END) stream->pos=stream->len+offset; - return 0; - } -} - - -size_t lufread(void *ptr,size_t size,size_t n,LUFILE *stream) -{ unsigned int toread = (unsigned int)(size*n); - if (stream->is_handle) - { DWORD red; BOOL res = ReadFile(stream->h,ptr,toread,&red,NULL); - if (!res) stream->herr=true; - return red/size; - } - if (stream->pos+toread > stream->len) toread = stream->len-stream->pos; - memcpy(ptr, (char*)stream->buf + stream->pos, toread); DWORD red = toread; - stream->pos += red; - return red/size; -} - - - - -// file_in_zip_read_info_s contain internal information about a file in zipfile, -// when reading and decompress it -typedef struct -{ - char *read_buffer; // internal buffer for compressed data - z_stream stream; // zLib stream structure for inflate - - uLong pos_in_zipfile; // position in byte on the zipfile, for fseek - uLong stream_initialised; // flag set if stream structure is initialised - - uLong offset_local_extrafield;// offset of the local extra field - uInt size_local_extrafield;// size of the local extra field - uLong pos_local_extrafield; // position in the local extra field in read - - uLong crc32; // crc32 of all data uncompressed - uLong crc32_wait; // crc32 we must obtain after decompress all - uLong rest_read_compressed; // number of byte to be decompressed - uLong rest_read_uncompressed;//number of byte to be obtained after decomp - LUFILE* file; // io structore of the zipfile - uLong compression_method; // compression method (0==store) - uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx) -} file_in_zip_read_info_s; - - -// unz_s contain internal information about the zipfile -typedef struct -{ - LUFILE* file; // io structore of the zipfile - unz_global_info gi; // public global information - uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx) - uLong num_file; // number of the current file in the zipfile - uLong pos_in_central_dir; // pos of the current file in the central dir - uLong current_file_ok; // flag about the usability of the current file - uLong central_pos; // position of the beginning of the central dir - - uLong size_central_dir; // size of the central directory - uLong offset_central_dir; // offset of start of central directory with respect to the starting disk number - - unz_file_info cur_file_info; // public info about the current file in zip - unz_file_info_internal cur_file_info_internal; // private info about it - file_in_zip_read_info_s* pfile_in_zip_read; // structure about the current file if we are decompressing it -} unz_s, *unzFile; - - -int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity); -// Compare two filename (fileName1,fileName2). - -z_off_t unztell (unzFile file); -// Give the current position in uncompressed data - -int unzeof (unzFile file); -// return 1 if the end of file was reached, 0 elsewhere - -int unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len); -// Read extra field from the current file (opened by unzOpenCurrentFile) -// This is the local-header version of the extra field (sometimes, there is -// more info in the local-header version than in the central-header) -// -// if buf==NULL, it return the size of the local extra field -// -// if buf!=NULL, len is the size of the buffer, the extra header is copied in -// buf. -// the return value is the number of bytes copied in buf, or (if <0) -// the error code - - - -// =========================================================================== -// Read a byte from a gz_stream; update next_in and avail_in. Return EOF -// for end of file. -// IN assertion: the stream s has been sucessfully opened for reading. - -int unzlocal_getByte(LUFILE *fin,int *pi) -{ unsigned char c; - int err = (int)lufread(&c, 1, 1, fin); - if (err==1) - { *pi = (int)c; - return UNZ_OK; - } - else - { if (luferror(fin)) return UNZ_ERRNO; - else return UNZ_EOF; - } -} - - -// =========================================================================== -// Reads a long in LSB order from the given gz_stream. Sets -int unzlocal_getShort (LUFILE *fin,uLong *pX) -{ - uLong x ; - int i; - int err; - - err = unzlocal_getByte(fin,&i); - x = (uLong)i; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<8; - - if (err==UNZ_OK) - *pX = x; - else - *pX = 0; - return err; -} - -int unzlocal_getLong (LUFILE *fin,uLong *pX) -{ - uLong x ; - int i; - int err; - - err = unzlocal_getByte(fin,&i); - x = (uLong)i; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<8; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<16; - - if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); - x += ((uLong)i)<<24; - - if (err==UNZ_OK) - *pX = x; - else - *pX = 0; - return err; -} - - -// My own strcmpi / strcasecmp -int strcmpcasenosensitive_internal (const char* fileName1,const char *fileName2) -{ - for (;;) - { - char c1=*(fileName1++); - char c2=*(fileName2++); - if ((c1>='a') && (c1<='z')) - c1 -= (char)0x20; - if ((c2>='a') && (c2<='z')) - c2 -= (char)0x20; - if (c1=='\0') - return ((c2=='\0') ? 0 : -1); - if (c2=='\0') - return 1; - if (c1c2) - return 1; - } -} - - - - -// -// Compare two filename (fileName1,fileName2). -// If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) -// If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi or strcasecmp) -// -int unzStringFileNameCompare (const char*fileName1,const char*fileName2,int iCaseSensitivity) -{ if (iCaseSensitivity==1) return strcmp(fileName1,fileName2); - else return strcmpcasenosensitive_internal(fileName1,fileName2); -} - -#define BUFREADCOMMENT (0x400) - - -// Locate the Central directory of a zipfile (at the end, just before -// the global comment) -uLong unzlocal_SearchCentralDir(LUFILE *fin) -{ if (lufseek(fin,0,SEEK_END) != 0) return 0; - uLong uSizeFile = luftell(fin); - - uLong uMaxBack=0xffff; // maximum size of global comment - if (uMaxBack>uSizeFile) uMaxBack = uSizeFile; - - unsigned char *buf = (unsigned char*)zmalloc(BUFREADCOMMENT+4); - if (buf==NULL) return 0; - uLong uPosFound=0; - - uLong uBackRead = 4; - while (uBackReaduMaxBack) uBackRead = uMaxBack; - else uBackRead+=BUFREADCOMMENT; - uReadPos = uSizeFile-uBackRead ; - uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); - if (lufseek(fin,uReadPos,SEEK_SET)!=0) break; - if (lufread(buf,(uInt)uReadSize,1,fin)!=1) break; - for (i=(int)uReadSize-3; (i--)>0;) - { if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) - { uPosFound = uReadPos+i; break; - } - } - if (uPosFound!=0) break; - } - if (buf) zfree(buf); - return uPosFound; -} - - -int unzGoToFirstFile (unzFile file); -int unzCloseCurrentFile (unzFile file); - -// Open a Zip file. -// If the zipfile cannot be opened (file don't exist or in not valid), return NULL. -// Otherwise, the return value is a unzFile Handle, usable with other unzip functions -unzFile unzOpenInternal(LUFILE *fin) -{ - zopenerror = ZR_OK; //+++1.2 - if (fin==NULL) { zopenerror = ZR_ARGS; return NULL; } //+++1.2 - if (unz_copyright[0]!=' ') {lufclose(fin); zopenerror = ZR_CORRUPT; return NULL; } //+++1.2 - - int err=UNZ_OK; - unz_s us; - uLong central_pos,uL; - central_pos = unzlocal_SearchCentralDir(fin); - if (central_pos==0) err=UNZ_ERRNO; - if (lufseek(fin,central_pos,SEEK_SET)!=0) err=UNZ_ERRNO; - // the signature, already checked - if (unzlocal_getLong(fin,&uL)!=UNZ_OK) err=UNZ_ERRNO; - // number of this disk - uLong number_disk; // number of the current dist, used for spanning ZIP, unsupported, always 0 - if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) err=UNZ_ERRNO; - // number of the disk with the start of the central directory - uLong number_disk_with_CD; // number the the disk with central dir, used for spaning ZIP, unsupported, always 0 - if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) err=UNZ_ERRNO; - // total number of entries in the central dir on this disk - if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) err=UNZ_ERRNO; - // total number of entries in the central dir - uLong number_entry_CD; // total number of entries in the central dir (same than number_entry on nospan) - if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) err=UNZ_ERRNO; - if ((number_entry_CD!=us.gi.number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) err=UNZ_BADZIPFILE; - // size of the central directory - if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) err=UNZ_ERRNO; - // offset of start of central directory with respect to the starting disk number - if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) err=UNZ_ERRNO; - // zipfile comment length - if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) err=UNZ_ERRNO; - if ((central_pos+fin->initial_offsetinitial_offset - (us.offset_central_dir+us.size_central_dir); - us.central_pos = central_pos; - us.pfile_in_zip_read = NULL; - fin->initial_offset = 0; // since the zipfile itself is expected to handle this - - unz_s *s = (unz_s*)zmalloc(sizeof(unz_s)); - *s=us; - unzGoToFirstFile((unzFile)s); - return (unzFile)s; -} - - - -// Close a ZipFile opened with unzipOpen. -// If there is files inside the .Zip opened with unzipOpenCurrentFile (see later), -// these files MUST be closed with unzipCloseCurrentFile before call unzipClose. -// return UNZ_OK if there is no problem. -int unzClose (unzFile file) -{ - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - - if (s->pfile_in_zip_read!=NULL) - unzCloseCurrentFile(file); - - lufclose(s->file); - if (s) zfree(s); // unused s=0; - return UNZ_OK; -} - - -// Write info about the ZipFile in the *pglobal_info structure. -// No preparation of the structure is needed -// return UNZ_OK if there is no problem. -int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info) -{ - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - *pglobal_info=s->gi; - return UNZ_OK; -} - - -// Translate date/time from Dos format to tm_unz (readable more easilty) -void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) -{ - uLong uDate; - uDate = (uLong)(ulDosDate>>16); - ptm->tm_mday = (uInt)(uDate&0x1f) ; - ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ; - ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ; - - ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800); - ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ; - ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ; -} - -// Get Info about the current file in the zipfile, with internal only info -int unzlocal_GetCurrentFileInfoInternal (unzFile file, - unz_file_info *pfile_info, - unz_file_info_internal - *pfile_info_internal, - char *szFileName, - uLong fileNameBufferSize, - void *extraField, - uLong extraFieldBufferSize, - char *szComment, - uLong commentBufferSize); - -int unzlocal_GetCurrentFileInfoInternal (unzFile file, unz_file_info *pfile_info, - unz_file_info_internal *pfile_info_internal, char *szFileName, - uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize, - char *szComment, uLong commentBufferSize) -{ - unz_s* s; - unz_file_info file_info; - unz_file_info_internal file_info_internal; - int err=UNZ_OK; - uLong uMagic; - long lSeek=0; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (lufseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0) - err=UNZ_ERRNO; - - - // we check the magic - if (err==UNZ_OK) - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x02014b50) - err=UNZ_BADZIPFILE; - - if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK) - err=UNZ_ERRNO; - - unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); - - if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK) - err=UNZ_ERRNO; - - lSeek+=file_info.size_filename; - if ((err==UNZ_OK) && (szFileName!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_filename0) && (fileNameBufferSize>0)) - if (lufread(szFileName,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek -= uSizeRead; - } - - - if ((err==UNZ_OK) && (extraField!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_extrafile,lSeek,SEEK_CUR)==0) - lSeek=0; - else - err=UNZ_ERRNO; - if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) - if (lufread(extraField,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek += file_info.size_file_extra - uSizeRead; - } - else - lSeek+=file_info.size_file_extra; - - - if ((err==UNZ_OK) && (szComment!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_commentfile,lSeek,SEEK_CUR)==0) - {} // unused lSeek=0; - else - err=UNZ_ERRNO; - if ((file_info.size_file_comment>0) && (commentBufferSize>0)) - if (lufread(szComment,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - //unused lSeek+=file_info.size_file_comment - uSizeRead; - } - else {} //unused lSeek+=file_info.size_file_comment; - - if ((err==UNZ_OK) && (pfile_info!=NULL)) - *pfile_info=file_info; - - if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) - *pfile_info_internal=file_info_internal; - - return err; -} - - - -// Write info about the ZipFile in the *pglobal_info structure. -// No preparation of the structure is needed -// return UNZ_OK if there is no problem. -int unzGetCurrentFileInfo (unzFile file, unz_file_info *pfile_info, - char *szFileName, uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize, - char *szComment, uLong commentBufferSize) -{ return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,szFileName,fileNameBufferSize, - extraField,extraFieldBufferSize, szComment,commentBufferSize); -} - - -// Set the current file of the zipfile to the first file. -// return UNZ_OK if there is no problem -int unzGoToFirstFile (unzFile file) -{ - int err; - unz_s* s; - if (file==NULL) return UNZ_PARAMERROR; - s=(unz_s*)file; - s->pos_in_central_dir=s->offset_central_dir; - s->num_file=0; - err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; -} - - -// Set the current file of the zipfile to the next file. -// return UNZ_OK if there is no problem -// return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. -int unzGoToNextFile (unzFile file) -{ - unz_s* s; - int err; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - if (s->num_file+1==s->gi.number_entry) - return UNZ_END_OF_LIST_OF_FILE; - - s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + - s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; - s->num_file++; - err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; -} - - -// Try locate the file szFileName in the zipfile. -// For the iCaseSensitivity signification, see unzStringFileNameCompare -// return value : -// UNZ_OK if the file is found. It becomes the current file. -// UNZ_END_OF_LIST_OF_FILE if the file is not found -int unzLocateFile (unzFile file, const TCHAR *szFileName, int iCaseSensitivity) -{ - unz_s* s; - int err; - - uLong num_fileSaved; - uLong pos_in_central_dirSaved; - - if (file==NULL) - return UNZ_PARAMERROR; - - if (_tcslen(szFileName)>=UNZ_MAXFILENAMEINZIP) - return UNZ_PARAMERROR; - - char szFileNameA[MAX_PATH]; - -#ifdef _UNICODE - GetAnsiFileName(szFileName, szFileNameA, MAX_PATH-1); -#else - strcpy(szFileNameA, szFileName); -#endif - - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - - num_fileSaved = s->num_file; - pos_in_central_dirSaved = s->pos_in_central_dir; - - err = unzGoToFirstFile(file); - - while (err == UNZ_OK) - { - char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; - unzGetCurrentFileInfo(file,NULL, - szCurrentFileName,sizeof(szCurrentFileName)-1, - NULL,0,NULL,0); - if (unzStringFileNameCompare(szCurrentFileName,szFileNameA,iCaseSensitivity)==0) - return UNZ_OK; - err = unzGoToNextFile(file); - } - - s->num_file = num_fileSaved ; - s->pos_in_central_dir = pos_in_central_dirSaved ; - return err; -} - - -// Read the local header of the current zipfile -// Check the coherency of the local header and info in the end of central -// directory about this file -// store in *piSizeVar the size of extra info in local header -// (filename and size of extra field data) -int unzlocal_CheckCurrentFileCoherencyHeader (unz_s *s,uInt *piSizeVar, - uLong *poffset_local_extrafield, uInt *psize_local_extrafield) -{ - uLong uMagic,uData,uFlags; - uLong size_filename; - uLong size_extra_field; - int err=UNZ_OK; - - *piSizeVar = 0; - *poffset_local_extrafield = 0; - *psize_local_extrafield = 0; - - if (lufseek(s->file,s->cur_file_info_internal.offset_curfile + s->byte_before_the_zipfile,SEEK_SET)!=0) - return UNZ_ERRNO; - - - if (err==UNZ_OK) - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x04034b50) - err=UNZ_BADZIPFILE; - - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; -// else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) -// err=UNZ_BADZIPFILE; - if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) - err=UNZ_BADZIPFILE; - - if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && - (s->cur_file_info.compression_method!=Z_DEFLATED)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // date/time - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // crc - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size compr - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size uncompr - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - - if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) - err=UNZ_BADZIPFILE; - - *piSizeVar += (uInt)size_filename; - - if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK) - err=UNZ_ERRNO; - *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + - SIZEZIPLOCALHEADER + size_filename; - *psize_local_extrafield = (uInt)size_extra_field; - - *piSizeVar += (uInt)size_extra_field; - - return err; -} - - - - - -// Open for reading data the current file in the zipfile. -// If there is no error and the file is opened, the return value is UNZ_OK. -int unzOpenCurrentFile (unzFile file) -{ - int err; - int Store; - uInt iSizeVar; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uLong offset_local_extrafield; // offset of the local extra field - uInt size_local_extrafield; // size of the local extra field - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_PARAMERROR; - - if (s->pfile_in_zip_read != NULL) - unzCloseCurrentFile(file); - - if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, - &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) - return UNZ_BADZIPFILE; - - pfile_in_zip_read_info = (file_in_zip_read_info_s*)zmalloc(sizeof(file_in_zip_read_info_s)); - if (pfile_in_zip_read_info==NULL) - return UNZ_INTERNALERROR; - - pfile_in_zip_read_info->read_buffer=(char*)zmalloc(UNZ_BUFSIZE); - pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; - pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; - pfile_in_zip_read_info->pos_local_extrafield=0; - - if (pfile_in_zip_read_info->read_buffer==NULL) - { - if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); //unused pfile_in_zip_read_info=0; - return UNZ_INTERNALERROR; - } - - pfile_in_zip_read_info->stream_initialised=0; - - if ((s->cur_file_info.compression_method!=0) && (s->cur_file_info.compression_method!=Z_DEFLATED)) - { // unused err=UNZ_BADZIPFILE; - } - Store = s->cur_file_info.compression_method==0; - - pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; - pfile_in_zip_read_info->crc32=0; - pfile_in_zip_read_info->compression_method = - s->cur_file_info.compression_method; - pfile_in_zip_read_info->file=s->file; - pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; - - pfile_in_zip_read_info->stream.total_out = 0; - - if (!Store) - { - pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; - pfile_in_zip_read_info->stream.zfree = (free_func)0; - pfile_in_zip_read_info->stream.opaque = (voidpf)0; - - err=inflateInit2(&pfile_in_zip_read_info->stream); - if (err == Z_OK) - pfile_in_zip_read_info->stream_initialised=1; - // windowBits is passed < 0 to tell that there is no zlib header. - // Note that in this case inflate *requires* an extra "dummy" byte - // after the compressed stream in order to complete decompression and - // return Z_STREAM_END. - // In unzip, i don't wait absolutely Z_STREAM_END because I known the - // size of both compressed and uncompressed data - } - pfile_in_zip_read_info->rest_read_compressed = - s->cur_file_info.compressed_size ; - pfile_in_zip_read_info->rest_read_uncompressed = - s->cur_file_info.uncompressed_size ; - - - pfile_in_zip_read_info->pos_in_zipfile = - s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + - iSizeVar; - - pfile_in_zip_read_info->stream.avail_in = (uInt)0; - - - s->pfile_in_zip_read = pfile_in_zip_read_info; - return UNZ_OK; -} - - -// Read bytes from the current file. -// buf contain buffer where data must be copied -// len the size of buf. -// return the number of byte copied if somes bytes are copied -// return 0 if the end of file was reached -// return <0 with error code if there is an error -// (UNZ_ERRNO for IO error, or zLib error for uncompress error) -int unzReadCurrentFile (unzFile file, voidp buf, unsigned len) -{ int err=UNZ_OK; - uInt iRead = 0; - - unz_s *s = (unz_s*)file; - if (s==NULL) return UNZ_PARAMERROR; - - file_in_zip_read_info_s* pfile_in_zip_read_info = s->pfile_in_zip_read; - if (pfile_in_zip_read_info==NULL) return UNZ_PARAMERROR; - if ((pfile_in_zip_read_info->read_buffer == NULL)) return UNZ_END_OF_LIST_OF_FILE; - if (len==0) return 0; - - pfile_in_zip_read_info->stream.next_out = (Byte*)buf; - pfile_in_zip_read_info->stream.avail_out = (uInt)len; - - if (len>pfile_in_zip_read_info->rest_read_uncompressed) - { pfile_in_zip_read_info->stream.avail_out = (uInt)pfile_in_zip_read_info->rest_read_uncompressed; - } - - while (pfile_in_zip_read_info->stream.avail_out>0) - { if ((pfile_in_zip_read_info->stream.avail_in==0) && (pfile_in_zip_read_info->rest_read_compressed>0)) - { uInt uReadThis = UNZ_BUFSIZE; - if (pfile_in_zip_read_info->rest_read_compressedrest_read_compressed; - if (uReadThis == 0) return UNZ_EOF; - if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->pos_in_zipfile + pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) return UNZ_ERRNO; - if (lufread(pfile_in_zip_read_info->read_buffer,uReadThis,1,pfile_in_zip_read_info->file)!=1) return UNZ_ERRNO; - pfile_in_zip_read_info->pos_in_zipfile += uReadThis; - pfile_in_zip_read_info->rest_read_compressed-=uReadThis; - pfile_in_zip_read_info->stream.next_in = (Byte*)pfile_in_zip_read_info->read_buffer; - pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; - } - - if (pfile_in_zip_read_info->compression_method==0) - { uInt uDoCopy,i ; - if (pfile_in_zip_read_info->stream.avail_out < pfile_in_zip_read_info->stream.avail_in) - { uDoCopy = pfile_in_zip_read_info->stream.avail_out ; - } - else - { uDoCopy = pfile_in_zip_read_info->stream.avail_in ; - } - for (i=0;istream.next_out+i) = *(pfile_in_zip_read_info->stream.next_in+i); - } - pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,pfile_in_zip_read_info->stream.next_out,uDoCopy); - pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; - pfile_in_zip_read_info->stream.avail_in -= uDoCopy; - pfile_in_zip_read_info->stream.avail_out -= uDoCopy; - pfile_in_zip_read_info->stream.next_out += uDoCopy; - pfile_in_zip_read_info->stream.next_in += uDoCopy; - pfile_in_zip_read_info->stream.total_out += uDoCopy; - iRead += uDoCopy; - } - else - { uLong uTotalOutBefore,uTotalOutAfter; - const Byte *bufBefore; - uLong uOutThis; - int flush=Z_SYNC_FLUSH; - uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; - bufBefore = pfile_in_zip_read_info->stream.next_out; - err=inflate(&pfile_in_zip_read_info->stream,flush); - uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; - uOutThis = uTotalOutAfter-uTotalOutBefore; - pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,bufBefore,(uInt)(uOutThis)); - pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis; - iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); - if (err==Z_STREAM_END) - { - if( pfile_in_zip_read_info->rest_read_uncompressed > 0 ) - { - return iRead; // More to go - } - return Z_OK; // No point returning UNZ_EOF as it is also zero - } - //if (err==Z_STREAM_END) return (iRead==0) ? UNZ_EOF : iRead; //+++1.3 - //if (err==Z_STREAM_END) return (iRead==len) ? UNZ_EOF : iRead; //+++1.2 - - if (err != Z_OK) break; - } - } - - // if (err==Z_OK) return iRead; - if( err == Z_OK ) - { - if( pfile_in_zip_read_info->rest_read_uncompressed > 0 ) - { - return iRead; // More to go - } - return Z_OK; // Done - } - - return iRead; -} - - -// Give the current position in uncompressed data -z_off_t unztell (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - return (z_off_t)pfile_in_zip_read_info->stream.total_out; -} - - -// return 1 if the end of file was reached, 0 elsewhere -int unzeof (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - return 1; - else - return 0; -} - - - -// Read extra field from the current file (opened by unzOpenCurrentFile) -// This is the local-header version of the extra field (sometimes, there is -// more info in the local-header version than in the central-header) -// if buf==NULL, it return the size of the local extra field that can be read -// if buf!=NULL, len is the size of the buffer, the extra header is copied in buf. -// the return value is the number of bytes copied in buf, or (if <0) the error code -int unzGetLocalExtrafield (unzFile file,voidp buf,unsigned len) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uInt read_now; - uLong size_to_read; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - size_to_read = (pfile_in_zip_read_info->size_local_extrafield - - pfile_in_zip_read_info->pos_local_extrafield); - - if (buf==NULL) - return (int)size_to_read; - - if (len>size_to_read) - read_now = (uInt)size_to_read; - else - read_now = (uInt)len ; - - if (read_now==0) - return 0; - - if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->offset_local_extrafield + pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0) - return UNZ_ERRNO; - - if (lufread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1) - return UNZ_ERRNO; - - return (int)read_now; -} - -// Close the file in zip opened with unzipOpenCurrentFile -// Return UNZ_CRCERROR if all the file was read but the CRC is not good -int unzCloseCurrentFile (unzFile file) -{ - int err=UNZ_OK; - - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - { - if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) - err=UNZ_CRCERROR; - } - - - if (pfile_in_zip_read_info->read_buffer!=0) - { void *buf = pfile_in_zip_read_info->read_buffer; - zfree(buf); - pfile_in_zip_read_info->read_buffer=0; - } - pfile_in_zip_read_info->read_buffer = NULL; - if (pfile_in_zip_read_info->stream_initialised) - inflateEnd(&pfile_in_zip_read_info->stream); - - pfile_in_zip_read_info->stream_initialised = 0; - if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); // unused pfile_in_zip_read_info=0; - - s->pfile_in_zip_read=NULL; - - return err; -} - - -// Get the global comment string of the ZipFile, in the szComment buffer. -// uSizeBuf is the size of the szComment buffer. -// return the number of byte copied or an error code <0 -int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf) -{ //int err=UNZ_OK; - unz_s* s; - uLong uReadThis ; - if (file==NULL) return UNZ_PARAMERROR; - s=(unz_s*)file; - uReadThis = uSizeBuf; - if (uReadThis>s->gi.size_comment) uReadThis = s->gi.size_comment; - if (lufseek(s->file,s->central_pos+22,SEEK_SET)!=0) return UNZ_ERRNO; - if (uReadThis>0) - { *szComment='\0'; - if (lufread(szComment,(uInt)uReadThis,1,s->file)!=1) return UNZ_ERRNO; - } - if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) *(szComment+s->gi.size_comment)='\0'; - return (int)uReadThis; -} - - - - - -int unzOpenCurrentFile (unzFile file); -int unzReadCurrentFile (unzFile file, void *buf, unsigned len); -int unzCloseCurrentFile (unzFile file); - - -FILETIME timet2filetime(__time32_t timer) -{ - struct tm *tm = _gmtime32(&timer); - SYSTEMTIME st; - - if (tm == NULL) - { - _time32(&timer); - tm = _gmtime32(&timer); - } - - st.wYear = (WORD)(tm->tm_year+1900); - st.wMonth = (WORD)(tm->tm_mon+1); - st.wDay = (WORD)(tm->tm_mday); - st.wHour = (WORD)(tm->tm_hour); - st.wMinute = (WORD)(tm->tm_min); - st.wSecond = (WORD)(tm->tm_sec); - st.wMilliseconds=0; - FILETIME ft; - SystemTimeToFileTime(&st,&ft); - return ft; -} - -/////////////////////////////////////////////////////////////////////////////// -/////////////////////////////////////////////////////////////////////////////// -/////////////////////////////////////////////////////////////////////////////// -class TUnzip -{ public: - TUnzip() : uf(0), currentfile(-1), czei(-1) {} - - unzFile uf; int currentfile; ZIPENTRY cze; int czei; - TCHAR rootdir[MAX_PATH]; - - ZRESULT Open(void *z,unsigned int len,DWORD flags); - ZRESULT Get(int index,ZIPENTRY *ze); - ZRESULT Find(const TCHAR *name,bool ic,int *index,ZIPENTRY *ze); - ZRESULT Unzip(int index,void *dst,unsigned int len,DWORD flags); - ZRESULT Close(); -}; - - -ZRESULT TUnzip::Open(void *z,unsigned int len,DWORD flags) -{ - if (uf!=0 || currentfile!=-1) - return ZR_NOTINITED; - GetCurrentDirectory(MAX_PATH,rootdir); - _tcscat(rootdir,_T("\\")); - if (flags==ZIP_HANDLE) - { - DWORD type = GetFileType(z); - if (type!=FILE_TYPE_DISK) - return ZR_SEEK; - } - ZRESULT e; - LUFILE *f = lufopen(z,len,flags,&e); - if (f==NULL) - return e; - uf = unzOpenInternal(f); - //return ZR_OK; - return zopenerror; //+++1.2 -} - -ZRESULT TUnzip::Get(int index,ZIPENTRY *ze) -{ if (index<-1 || index>=(int)uf->gi.number_entry) - return ZR_ARGS; - if (currentfile!=-1) - unzCloseCurrentFile(uf); - currentfile=-1; - if (index==czei && index!=-1) {memcpy(ze,&cze,sizeof(ZIPENTRY)); return ZR_OK;} - if (index==-1) - { ze->index = uf->gi.number_entry; - ze->name[0]=0; - ze->attr=0; - ze->atime.dwLowDateTime=0; ze->atime.dwHighDateTime=0; - ze->ctime.dwLowDateTime=0; ze->ctime.dwHighDateTime=0; - ze->mtime.dwLowDateTime=0; ze->mtime.dwHighDateTime=0; - ze->comp_size=0; - ze->unc_size=0; - return ZR_OK; - } - if (index<(int)uf->num_file) unzGoToFirstFile(uf); - while ((int)uf->num_filefile,offset,SEEK_SET)!=0) return ZR_READ; - char *extra = new char[extralen]; - if (lufread(extra,1,(uInt)extralen,uf->file)!=extralen) {delete[] extra; return ZR_READ;} - // - ze->index=uf->num_file; - strcpy(ze->name,fn); - // zip has an 'attribute' 32bit value. Its lower half is windows stuff - // its upper half is standard unix attr. - unsigned long a = ufi.external_fa; - bool uisdir = (a&0x40000000)!=0; - //bool uwriteable= (a&0x08000000)!=0; - bool uwriteable= (a&0x00800000)!=0; // ***hd*** - //bool ureadable= (a&0x01000000)!=0; - //bool uexecutable=(a&0x00400000)!=0; - bool wreadonly= (a&0x00000001)!=0; - bool whidden= (a&0x00000002)!=0; - bool wsystem= (a&0x00000004)!=0; - bool wisdir= (a&0x00000010)!=0; - bool warchive= (a&0x00000020)!=0; - ze->attr=FILE_ATTRIBUTE_NORMAL; - if (uisdir || wisdir) ze->attr |= FILE_ATTRIBUTE_DIRECTORY; - if (warchive) ze->attr|=FILE_ATTRIBUTE_ARCHIVE; - if (whidden) ze->attr|=FILE_ATTRIBUTE_HIDDEN; - if (!uwriteable||wreadonly) ze->attr|=FILE_ATTRIBUTE_READONLY; - if (wsystem) ze->attr|=FILE_ATTRIBUTE_SYSTEM; - ze->comp_size = ufi.compressed_size; - ze->unc_size = ufi.uncompressed_size; - // - WORD dostime = (WORD)(ufi.dosDate&0xFFFF); - WORD dosdate = (WORD)((ufi.dosDate>>16)&0xFFFF); - FILETIME lt, ft; - DosDateTimeToFileTime(dosdate,dostime,<); - LocalFileTimeToFileTime(<,&ft); - ze->atime=ft; ze->ctime=ft; ze->mtime=ft; - // the zip will always have at least that dostime. But if it also has - // an extra header, then we'll instead get the info from that. - unsigned int epos=0; - while (epos+4mtime = timet2filetime(mtime); - } - if (hasatime) - { __time32_t atime = *(__time32_t*)(extra+epos); epos+=4; - ze->atime = timet2filetime(atime); - } - if (hasctime) - { __time32_t ctime = *(__time32_t*)(extra+epos); - ze->ctime = timet2filetime(ctime); - } - break; - } - // - if (extra!=0) delete[] extra; - memcpy(&cze,ze,sizeof(ZIPENTRY)); czei=index; - return ZR_OK; -} - -ZRESULT TUnzip::Find(const TCHAR *name, bool ic, int *index, ZIPENTRY *ze) -{ - int res = unzLocateFile(uf,name,ic?CASE_INSENSITIVE:CASE_SENSITIVE); - if (res!=UNZ_OK) - { - if (index!=0) - *index=-1; - if (ze!=NULL) - { - ZeroMemory(ze,sizeof(ZIPENTRY)); ze->index=-1; - } - return ZR_NOTFOUND; - } - if (currentfile!=-1) - unzCloseCurrentFile(uf); currentfile=-1; - int i = (int)uf->num_file; - if (index!=NULL) - *index=i; - if (ze!=NULL) - { - ZRESULT zres = Get(i,ze); - if (zres!=ZR_OK) - return zres; - } - return ZR_OK; -} - -void EnsureDirectory(const TCHAR *rootdir, const TCHAR *dir) -{ - if (dir==NULL || dir[0] == _T('\0')) - return; - const TCHAR *lastslash = dir, *c = lastslash; - while (*c != _T('\0')) - { - if (*c==_T('/') || *c==_T('\\')) - lastslash=c; - c++; - } - const TCHAR *name=lastslash; - if (lastslash!=dir) - { - TCHAR tmp[MAX_PATH]; - _tcsncpy(tmp, dir, lastslash-dir); - tmp[lastslash-dir] = _T('\0'); - EnsureDirectory(rootdir,tmp); - name++; - } - TCHAR cd[MAX_PATH]; - _tcscpy(cd,rootdir); - //_tcscat(cd,name); - _tcscat(cd,dir); //+++1.2 - CreateDirectory(cd,NULL); -} - -ZRESULT TUnzip::Unzip(int index,void *dst,unsigned int len,DWORD flags) -{ - if (flags!=ZIP_MEMORY && flags!=ZIP_FILENAME && flags!=ZIP_HANDLE) - return ZR_ARGS; - if (flags==ZIP_MEMORY) - { - if (index!=currentfile) - { - if (currentfile!=-1) - unzCloseCurrentFile(uf); - currentfile=-1; - if (index>=(int)uf->gi.number_entry) - return ZR_ARGS; - if (index<(int)uf->num_file) - unzGoToFirstFile(uf); - while ((int)uf->num_file0) - return ZR_MORE; - unzCloseCurrentFile(uf); - currentfile=-1; - if (res==0) - return ZR_OK; - else - return ZR_FLATE; - } - - // otherwise we're writing to a handle or a file - if (currentfile!=-1) - unzCloseCurrentFile(uf); - currentfile=-1; - if (index >= (int)uf->gi.number_entry) - return ZR_ARGS; - if (index < (int)uf->num_file) - unzGoToFirstFile(uf); - while ((int)uf->num_filelen) n=len-1; - strncpy(buf,msg,n); buf[n]=0; - return mlen; -} - - -typedef struct -{ DWORD flag; - TUnzip *unz; -} TUnzipHandleData; - -HZIP OpenZipU(void *z,unsigned int len,DWORD flags) -{ - TUnzip *unz = new TUnzip(); - lasterrorU = unz->Open(z,len,flags); - if (lasterrorU!=ZR_OK) - { - delete unz; - return 0; - } - TUnzipHandleData *han = new TUnzipHandleData; - han->flag=1; - han->unz=unz; - return (HZIP)han; -} - -ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze) -{ - if (hz==0) - { - lasterrorU=ZR_ARGS; - return ZR_ARGS; - } - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) - { - lasterrorU=ZR_ZMODE; - return ZR_ZMODE; - } - TUnzip *unz = han->unz; - lasterrorU = unz->Get(index,ze); - return lasterrorU; -} - -ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *zew) -{ - if (hz==0) - { - lasterrorU=ZR_ARGS; - return ZR_ARGS; - } - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) - { - lasterrorU=ZR_ZMODE; - return ZR_ZMODE; - } - TUnzip *unz = han->unz; - ZIPENTRY ze; - lasterrorU = unz->Get(index,&ze); - if (lasterrorU == ZR_OK) - { - zew->index = ze.index; - zew->attr = ze.attr; - zew->atime = ze.atime; - zew->ctime = ze.ctime; - zew->mtime = ze.mtime; - zew->comp_size = ze.comp_size; - zew->unc_size = ze.unc_size; -#ifdef _UNICODE - GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1); -#else - strcpy(zew->name, ze.name); -#endif - } - return lasterrorU; -} - -ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze) -{ - if (hz==0) - { - lasterrorU=ZR_ARGS; - return ZR_ARGS; - } - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) - { - lasterrorU=ZR_ZMODE; - return ZR_ZMODE; - } - TUnzip *unz = han->unz; - lasterrorU = unz->Find(name,ic,index,ze); - return lasterrorU; -} - -ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *zew) -{ - if (hz==0) - { - lasterrorU=ZR_ARGS; - return ZR_ARGS; - } - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) - { - lasterrorU=ZR_ZMODE; - return ZR_ZMODE; - } - TUnzip *unz = han->unz; - ZIPENTRY ze; - lasterrorU = unz->Find(name,ic,index,&ze); - if (lasterrorU == ZR_OK) - { - zew->index = ze.index; - zew->attr = ze.attr; - zew->atime = ze.atime; - zew->ctime = ze.ctime; - zew->mtime = ze.mtime; - zew->comp_size = ze.comp_size; - zew->unc_size = ze.unc_size; -#ifdef _UNICODE - GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1); -#else - strcpy(zew->name, ze.name); -#endif - } - - return lasterrorU; -} - -ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags) -{ - if (hz==0) - { - lasterrorU=ZR_ARGS; - return ZR_ARGS; - } - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) - { - lasterrorU=ZR_ZMODE; - return ZR_ZMODE; - } - TUnzip *unz = han->unz; - lasterrorU = unz->Unzip(index,dst,len,flags); - return lasterrorU; -} - -ZRESULT CloseZipU(HZIP hz) -{ if (hz==0) {lasterrorU=ZR_ARGS;return ZR_ARGS;} - TUnzipHandleData *han = (TUnzipHandleData*)hz; - if (han->flag!=1) {lasterrorU=ZR_ZMODE;return ZR_ZMODE;} - TUnzip *unz = han->unz; - lasterrorU = unz->Close(); - delete unz; - delete han; - return lasterrorU; -} - -bool IsZipHandleU(HZIP hz) -{ if (hz==0) return true; - TUnzipHandleData *han = (TUnzipHandleData*)hz; - return (han->flag==1); -} - - -- cgit v1.2.3