From 6cb1eefc49dbac29fb5a5bd2bf42569b6882d9c7 Mon Sep 17 00:00:00 2001 From: Mounir IDRASSI Date: Fri, 1 Jan 2016 02:09:44 +0100 Subject: Windows: sign binaries using both SHA-1 and SHA-256 for maximum compatibility. Add requirement for Windows SDK 8.1 that contains signtool.exe version that enables this. --- README.md | 526 +++++++++++++++++++++++----------------------- src/Readme.txt | 3 + src/Signing/sign.bat | 24 +-- src/Signing/sign_test.bat | 21 +- 4 files changed, 289 insertions(+), 285 deletions(-) diff --git a/README.md b/README.md index 1cdcc00d..8aad8a97 100644 --- a/README.md +++ b/README.md @@ -1,262 +1,264 @@ -This archive contains the source code of VeraCrypt. -It is based on original TrueCrypt 7.1a with security enhancements and modifications. - - -Important -========= - -You may use the source code contained in this archive only if you accept and -agree to the license terms contained in the file 'License.txt', which is -included in this archive. - -Note that the license specifies, for example, that a derived work must not be -called 'TrueCrypt' or 'VeraCrypt' - - - -Contents -======== - -I. Windows - Requirements for Building VeraCrypt for Windows - Instructions for Building VeraCrypt for Windows - Instructions for Signing and Packaging VeraCrypt for Windows - -II. Linux and Mac OS X - Requirements for Building VeraCrypt for Linux and Mac OS X - Instructions for Building VeraCrypt for Linux and Mac OS X - Mac OS X specifics - -III. FreeBSD and OpenSolaris - -IV. Third-Party Developers (Contributors) - -V. Legal Information - -VI. Further Information - - - -I. Windows -========== - -Requirements for Building VeraCrypt for Windows: ------------------------------------------------- - -- Microsoft Visual C++ 2008 SP1 (Professional Edition or compatible) -- Microsoft Visual C++ 1.52 (available from MSDN Subscriber Downloads) -- Microsoft Windows SDK for Windows 7 (configured for Visual C++) -- Microsoft Windows Driver Kit 7.1.0 (build 7600.16385.1) -- RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 - header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20) -- NASM assembler 2.08 or compatible -- gzip compressor -- upx packer (available at http://upx.sourceforge.net/) - -IMPORTANT: - -The 64-bit editions of Windows Vista and later versions of Windows, and in -some cases (e.g. playback of HD DVD content) also the 32-bit editions, do not -allow the VeraCrypt driver to run without an appropriate digital signature. -Therefore, all .sys files in official VeraCrypt binary packages are digitally -signed with the digital certificate of the IDRIX, which was -issued by Thawte certification authority. At the end of each official .exe and -.sys file, there are embedded digital signatures and all related certificates -(i.e. all certificates in the relevant certification chain, such as the -certification authority certificates, CA-MS cross-certificate, and the -IDRIX certificate). -Keep this in mind if you compile VeraCrypt -and compare your binaries with the official binaries. If your binaries are -unsigned, the sizes of the official binaries will usually be approximately -10 KB greater than sizes of your binaries (there may be further differences -if you use a different version of the compiler, or if you install a different -or no service pack for Visual Studio, or different hotfixes for it, or if you -use different versions of the required SDKs). - - -Instructions for Building VeraCrypt for Windows: ------------------------------------------------- - -1) Create an environment variable 'MSVC16_ROOT' pointing to the folder 'MSVC15' - extracted from the Visual C++ 1.52 self-extracting package. - - Note: The 16-bit installer MSVC15\SETUP.EXE cannot be run on 64-bit Windows, - but it is actually not necessary to run it. You only need to extract the - folder 'MSVC15', which contains the 32-bit binaries required to build the - VeraCrypt Boot Loader. - -2) If you have installed the Windows Driver Development Kit in another - directory than '%SYSTEMDRIVE%\WinDDK', create an environment variable - 'WINDDK_ROOT' pointing to the DDK installation directory. - -3) Copy the PKCS #11 header files to a standard include path or create an - environment variable 'PKCS11_INC' pointing to the directory where - the PKCS #11 header files are installed. - -4) Open the solution file 'VeraCrypt.sln' in Microsoft Visual Studio 2008. - -5) Select 'All' as the active solution configuration. - -6) Build the solution. - -7) If successful, there should be newly built VeraCrypt binaries in the - 'Release' folder. - -Instructions for Signing and Packaging VeraCrypt for Windows: -------------------------------------------------------------- - -The folder "Signing" contains a batch file (sign.bat) that will sign all -VeraCrypt components using a code signing certificate present on the -certificate store and also build the final installation setup. -The batch file suppose that the code signing certificate is issued by Thawt. -This is the case for IDRIX's certificate. If yours is issued by another CA, -then you should put the Root and Intermediate certificates in the "Signing" -folder and then modify sign.bat accordingly. - - -II. Linux and Mac OS X -====================== - -Requirements for Building VeraCrypt for Linux and Mac OS X: ------------------------------------------------------------ - -- GNU Make -- GNU C++ Compiler 4.0 or compatible -- Apple Xcode (Mac OS X only) -- NASM assembler 2.08 or compatible (x86/x64 architecture only) -- pkg-config -- makeself (Linux only) -- wxWidgets 3.0 shared library and header files installed or - wxWidgets 3.0 library source code (available at http://www.wxwidgets.org) -- FUSE library and header files (available at http://fuse.sourceforge.net - and https://osxfuse.github.io/) -- RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 - header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20). - They are already included in the source tree under the directory PKCS11 but - it is possible to override it using the environment variable 'PKCS11_INC'. - - -Instructions for Building VeraCrypt for Linux and Mac OS X: ------------------------------------------------------------ - -1) Change the current directory to the root of the VeraCrypt source code. - -2) If you have no wxWidgets shared library installed, run the following - command to configure the wxWidgets static library for VeraCrypt and to - build it: - - $ make WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild - - The variable WX_ROOT must point to the location of the source code of the - wxWidgets library. Output files will be placed in the './wxrelease/' - directory. - -3) To build VeraCrypt, run the following command: - - $ make - - or if you have no wxWidgets shared library installed: - - $ make WXSTATIC=1 - -4) If successful, the VeraCrypt executable should be located in the directory - 'Main'. - -By default, a universal executable supporting both graphical and text user -interface (through the switch --text) is built. -On Linux, a console-only executable, which requires no GUI library, can be -built using the 'NOGUI' parameter: - - $ make NOGUI=1 WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild - $ make NOGUI=1 WXSTATIC=1 - -On MacOSX, building a console-only executable is not supported. - -Mac OS X specifics: ------------------------------------------------------------ - -Under MacOSX, the SDK for OSX 10.7 is used by default. To use another version -of the SDK (i.e. 10.6), you can export the environment variable VC_OSX_TARGET: - - $ export VC_OSX_TARGET=10.6 - - -Before building under MacOSX, pkg-config must be installed if not yet available. -Get it from http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz and -compile using the following commands : - - $ ./configure --with-internal-glib - $ make - $ sudo make install - -After making sure pkg-config is available, download and install OSXFuse from -https://osxfuse.github.io/ (MacFUSE compatibility layer must selected) - -The script build_veracrypt_macosx.sh available under "src/Build" performs the -full build of VeraCrypt including the creation of the installer pkg. It expects -to find the wxWidgets 3.0.2 sources at the same level as where you put -VeraCrypt sources (i.e. if "src" path is "/Users/joe/Projects/VeraCrypt/src" -then wxWidgets should be at "/Users/joe/Projects/wxWidgets-wxWidgets-3.0.2") - -The build process uses Code Signing certificates whose ID is specified in -src/Main/Main.make (lines 167 & 169). You'll have to modify these lines to put -the ID of your Code Signing certificates or comment them if you don't have one. - -Because of incompatibility issues with OSXFUSE, the SDK 10.9 generates a -VeraCrypt binary that has issues communicating with the OSXFUSE kernel extension. -Thus, we recommend to use the SDK 10.8 or earlier for building VeraCrypt. - - - -III. FreeBSD and OpenSolaris -============================ - -FreeBSD and OpenSolaris are not yet supported. - - - -IV. Third-Party Developers (Contributors) -========================================= - -If you intend to implement a feature, please contact us first to make sure: - -1) That the feature has not been implemented (we may have already implemented - it, but haven't released the code yet). -2) That the feature is acceptable. -3) Whether we need help of third-party developers with implementing the feature. - -Information on how to contact us can be found at: -https://veracrypt.codeplex.com/ - - - -V. Legal Information -==================== - -Copyright Information ---------------------- - -This software as a whole: -Copyright (c) 2013-2015 IDRIX. All rights reserved. - -Portions of this software: -Copyright (c) 2003-2012 TrueCrypt Developers Association. All rights reserved. -Copyright (c) 1998-2000 Paul Le Roux. All rights reserved. -Copyright (c) 1998-2008 Brian Gladman, Worcester, UK. All rights reserved. -Copyright (c) 2002-2004 Mark Adler. All rights reserved. -For more information, please see the legal notices attached to parts of the -source code. - -Trademark Information ---------------------- - -Any trademarks contained in the source code, binaries, and/or in the -documentation, are the sole property of their respective owners. - - - -VI. Further Information -======================= - -http://www.veracrypt.fr - +This archive contains the source code of VeraCrypt. +It is based on original TrueCrypt 7.1a with security enhancements and modifications. + + +Important +========= + +You may use the source code contained in this archive only if you accept and +agree to the license terms contained in the file 'License.txt', which is +included in this archive. + +Note that the license specifies, for example, that a derived work must not be +called 'TrueCrypt' or 'VeraCrypt' + + + +Contents +======== + +I. Windows + Requirements for Building VeraCrypt for Windows + Instructions for Building VeraCrypt for Windows + Instructions for Signing and Packaging VeraCrypt for Windows + +II. Linux and Mac OS X + Requirements for Building VeraCrypt for Linux and Mac OS X + Instructions for Building VeraCrypt for Linux and Mac OS X + Mac OS X specifics + +III. FreeBSD and OpenSolaris + +IV. Third-Party Developers (Contributors) + +V. Legal Information + +VI. Further Information + + + +I. Windows +========== + +Requirements for Building VeraCrypt for Windows: +------------------------------------------------ + +- Microsoft Visual C++ 2008 SP1 (Professional Edition or compatible) +- Microsoft Visual C++ 1.52 (available from MSDN Subscriber Downloads) +- Microsoft Windows SDK for Windows 7 (configured for Visual C++) +- Microsoft Windows SDK for Windows 8.1 (needed for SHA-256 code signing) +- Microsoft Windows Driver Kit 7.1.0 (build 7600.16385.1) +- RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 + header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20) +- NASM assembler 2.08 or compatible +- gzip compressor +- upx packer (available at http://upx.sourceforge.net/) + +IMPORTANT: + +The 64-bit editions of Windows Vista and later versions of Windows, and in +some cases (e.g. playback of HD DVD content) also the 32-bit editions, do not +allow the VeraCrypt driver to run without an appropriate digital signature. +Therefore, all .sys files in official VeraCrypt binary packages are digitally +signed with the digital certificate of the IDRIX, which was +issued by Thawte certification authority. At the end of each official .exe and +.sys file, there are embedded digital signatures and all related certificates +(i.e. all certificates in the relevant certification chain, such as the +certification authority certificates, CA-MS cross-certificate, and the +IDRIX certificate). +Keep this in mind if you compile VeraCrypt +and compare your binaries with the official binaries. If your binaries are +unsigned, the sizes of the official binaries will usually be approximately +10 KB greater than sizes of your binaries (there may be further differences +if you use a different version of the compiler, or if you install a different +or no service pack for Visual Studio, or different hotfixes for it, or if you +use different versions of the required SDKs). + + +Instructions for Building VeraCrypt for Windows: +------------------------------------------------ + +1) Create an environment variable 'MSVC16_ROOT' pointing to the folder 'MSVC15' + extracted from the Visual C++ 1.52 self-extracting package. + + Note: The 16-bit installer MSVC15\SETUP.EXE cannot be run on 64-bit Windows, + but it is actually not necessary to run it. You only need to extract the + folder 'MSVC15', which contains the 32-bit binaries required to build the + VeraCrypt Boot Loader. + +2) If you have installed the Windows Driver Development Kit in another + directory than '%SYSTEMDRIVE%\WinDDK', create an environment variable + 'WINDDK_ROOT' pointing to the DDK installation directory. + +3) Copy the PKCS #11 header files to a standard include path or create an + environment variable 'PKCS11_INC' pointing to the directory where + the PKCS #11 header files are installed. + +4) Open the solution file 'VeraCrypt.sln' in Microsoft Visual Studio 2008. + +5) Select 'All' as the active solution configuration. + +6) Build the solution. + +7) If successful, there should be newly built VeraCrypt binaries in the + 'Release' folder. + +Instructions for Signing and Packaging VeraCrypt for Windows: +------------------------------------------------------------- + +First, create an environment variable 'WSDK81' pointing to the Windows SDK +for Windows 8.1 installation directory. +The folder "Signing" contains a batch file (sign.bat) that will sign all +VeraCrypt components using a code signing certificate present on the +certificate store and also build the final installation setup. +The batch file suppose that the code signing certificate is issued by Thawt. +This is the case for IDRIX's certificate. If yours is issued by another CA, +then you should put the Root and Intermediate certificates in the "Signing" +folder and then modify sign.bat accordingly. + + +II. Linux and Mac OS X +====================== + +Requirements for Building VeraCrypt for Linux and Mac OS X: +----------------------------------------------------------- + +- GNU Make +- GNU C++ Compiler 4.0 or compatible +- Apple Xcode (Mac OS X only) +- NASM assembler 2.08 or compatible (x86/x64 architecture only) +- pkg-config +- makeself (Linux only) +- wxWidgets 3.0 shared library and header files installed or + wxWidgets 3.0 library source code (available at http://www.wxwidgets.org) +- FUSE library and header files (available at http://fuse.sourceforge.net + and https://osxfuse.github.io/) +- RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 + header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20). + They are already included in the source tree under the directory PKCS11 but + it is possible to override it using the environment variable 'PKCS11_INC'. + + +Instructions for Building VeraCrypt for Linux and Mac OS X: +----------------------------------------------------------- + +1) Change the current directory to the root of the VeraCrypt source code. + +2) If you have no wxWidgets shared library installed, run the following + command to configure the wxWidgets static library for VeraCrypt and to + build it: + + $ make WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild + + The variable WX_ROOT must point to the location of the source code of the + wxWidgets library. Output files will be placed in the './wxrelease/' + directory. + +3) To build VeraCrypt, run the following command: + + $ make + + or if you have no wxWidgets shared library installed: + + $ make WXSTATIC=1 + +4) If successful, the VeraCrypt executable should be located in the directory + 'Main'. + +By default, a universal executable supporting both graphical and text user +interface (through the switch --text) is built. +On Linux, a console-only executable, which requires no GUI library, can be +built using the 'NOGUI' parameter: + + $ make NOGUI=1 WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild + $ make NOGUI=1 WXSTATIC=1 + +On MacOSX, building a console-only executable is not supported. + +Mac OS X specifics: +----------------------------------------------------------- + +Under MacOSX, the SDK for OSX 10.7 is used by default. To use another version +of the SDK (i.e. 10.6), you can export the environment variable VC_OSX_TARGET: + + $ export VC_OSX_TARGET=10.6 + + +Before building under MacOSX, pkg-config must be installed if not yet available. +Get it from http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz and +compile using the following commands : + + $ ./configure --with-internal-glib + $ make + $ sudo make install + +After making sure pkg-config is available, download and install OSXFuse from +https://osxfuse.github.io/ (MacFUSE compatibility layer must selected) + +The script build_veracrypt_macosx.sh available under "src/Build" performs the +full build of VeraCrypt including the creation of the installer pkg. It expects +to find the wxWidgets 3.0.2 sources at the same level as where you put +VeraCrypt sources (i.e. if "src" path is "/Users/joe/Projects/VeraCrypt/src" +then wxWidgets should be at "/Users/joe/Projects/wxWidgets-wxWidgets-3.0.2") + +The build process uses Code Signing certificates whose ID is specified in +src/Main/Main.make (lines 167 & 169). You'll have to modify these lines to put +the ID of your Code Signing certificates or comment them if you don't have one. + +Because of incompatibility issues with OSXFUSE, the SDK 10.9 generates a +VeraCrypt binary that has issues communicating with the OSXFUSE kernel extension. +Thus, we recommend to use the SDK 10.8 or earlier for building VeraCrypt. + + + +III. FreeBSD and OpenSolaris +============================ + +FreeBSD and OpenSolaris are not yet supported. + + + +IV. Third-Party Developers (Contributors) +========================================= + +If you intend to implement a feature, please contact us first to make sure: + +1) That the feature has not been implemented (we may have already implemented + it, but haven't released the code yet). +2) That the feature is acceptable. +3) Whether we need help of third-party developers with implementing the feature. + +Information on how to contact us can be found at: +https://veracrypt.codeplex.com/ + + + +V. Legal Information +==================== + +Copyright Information +--------------------- + +This software as a whole: +Copyright (c) 2013-2015 IDRIX. All rights reserved. + +Portions of this software: +Copyright (c) 2003-2012 TrueCrypt Developers Association. All rights reserved. +Copyright (c) 1998-2000 Paul Le Roux. All rights reserved. +Copyright (c) 1998-2008 Brian Gladman, Worcester, UK. All rights reserved. +Copyright (c) 2002-2004 Mark Adler. All rights reserved. +For more information, please see the legal notices attached to parts of the +source code. + +Trademark Information +--------------------- + +Any trademarks contained in the source code, binaries, and/or in the +documentation, are the sole property of their respective owners. + + + +VI. Further Information +======================= + +http://www.veracrypt.fr diff --git a/src/Readme.txt b/src/Readme.txt index 3e33b570..7b1fe67e 100644 --- a/src/Readme.txt +++ b/src/Readme.txt @@ -46,6 +46,7 @@ Requirements for Building VeraCrypt for Windows: - Microsoft Visual C++ 2008 SP1 (Professional Edition or compatible) - Microsoft Visual C++ 1.52 (available from MSDN Subscriber Downloads) - Microsoft Windows SDK for Windows 7 (configured for Visual C++) +- Microsoft Windows SDK for Windows 8.1 (needed for SHA-256 code signing) - Microsoft Windows Driver Kit 7.1.0 (build 7600.16385.1) - RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20) @@ -105,6 +106,8 @@ Instructions for Building VeraCrypt for Windows: Instructions for Signing and Packaging VeraCrypt for Windows: ------------------------------------------------------------- +First, create an environment variable 'WSDK81' pointing to the Windows SDK +for Windows 8.1 installation directory. The folder "Signing" contains a batch file (sign.bat) that will sign all VeraCrypt components using a code signing certificate present on the certificate store and also build the final installation setup. diff --git a/src/Signing/sign.bat b/src/Signing/sign.bat index 5e19cd10..8c1e3920 100644 --- a/src/Signing/sign.bat +++ b/src/Signing/sign.bat @@ -1,15 +1,12 @@ -PATH=%PATH%;%DDK%\bin\x86 +PATH=%PATH%;%WSDK81%\bin\x86 -signtool sign /v /a /n IDRIX /ac thawte_Primary_MS_Cross_Cert.cer /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt.sys" -signtool sign /v /a /n IDRIX /ac thawte_Primary_MS_Cross_Cert.cer /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt-x64.sys" +rem sign using SHA-1 +signtool sign /v /a /n IDRIX /ac thawte_Primary_MS_Cross_Cert.cer /fd sha1 /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt.sys" "..\Release\Setup Files\veracrypt-x64.sys" +signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /fd sha1 /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt.exe" "..\Release\Setup Files\VeraCrypt Format.exe" "..\Release\Setup Files\VeraCryptExpander.exe" "..\Release\Setup Files\VeraCrypt-x64.exe" "..\Release\Setup Files\VeraCrypt Format-x64.exe" "..\Release\Setup Files\VeraCryptExpander-x64.exe" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt.exe" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Format.exe" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCryptExpander.exe" - -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt-x64.exe" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Format-x64.exe" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCryptExpander-x64.exe" +rem sign using SHA-256 +signtool sign /v /a /n IDRIX /ac thawte_Primary_MS_Cross_Cert.cer /as /fd sha256 /tr http://timestamp.geotrust.com/tsa "..\Release\Setup Files\veracrypt.sys" "..\Release\Setup Files\veracrypt-x64.sys" +signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /as /fd sha256 /tr http://timestamp.geotrust.com/tsa "..\Release\Setup Files\VeraCrypt.exe" "..\Release\Setup Files\VeraCrypt Format.exe" "..\Release\Setup Files\VeraCryptExpander.exe" "..\Release\Setup Files\VeraCrypt-x64.exe" "..\Release\Setup Files\VeraCrypt Format-x64.exe" "..\Release\Setup Files\VeraCryptExpander-x64.exe" cd "..\Release\Setup Files\" @@ -21,6 +18,9 @@ del *.xml cd "..\..\Signing" -signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" +rem sign using SHA-1 +signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /fd sha1 /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" +rem sign using SHA-256 +signtool sign /v /a /n IDRIX /ac Thawt_CodeSigning_CA.crt /as /fd sha256 /tr http://timestamp.geotrust.com/tsa "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" -pause \ No newline at end of file +pause diff --git a/src/Signing/sign_test.bat b/src/Signing/sign_test.bat index d81aac99..c36f0536 100644 --- a/src/Signing/sign_test.bat +++ b/src/Signing/sign_test.bat @@ -1,18 +1,13 @@ -PATH=%PATH%;%DDK%\bin\x86 +PATH=%PATH%;%WSDK81%\bin\x86 set PFXNAME=TestCertificate\idrix_codeSign.pfx set PFXPASSWORD=idrix -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt.sys" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt-x64.sys" +rem sign using SHA-1 +signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /fd sha1 /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\veracrypt.sys" "..\Release\Setup Files\veracrypt-x64.sys" "..\Release\Setup Files\VeraCrypt.exe" "..\Release\Setup Files\VeraCrypt Format.exe" "..\Release\Setup Files\VeraCryptExpander.exe" "..\Release\Setup Files\VeraCrypt-x64.exe" "..\Release\Setup Files\VeraCrypt Format-x64.exe" "..\Release\Setup Files\VeraCryptExpander-x64.exe" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt.exe" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Format.exe" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCryptExpander.exe" - -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCryptx-x64.exe" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Format-x64.exe" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCryptExpander-x64.exe" +rem sign using SHA-256 +signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /as /fd sha256 /tr http://timestamp.geotrust.com/tsa "..\Release\Setup Files\veracrypt.sys" "..\Release\Setup Files\veracrypt-x64.sys" "..\Release\Setup Files\VeraCrypt.exe" "..\Release\Setup Files\VeraCrypt Format.exe" "..\Release\Setup Files\VeraCryptExpander.exe" "..\Release\Setup Files\VeraCrypt-x64.exe" "..\Release\Setup Files\VeraCrypt Format-x64.exe" "..\Release\Setup Files\VeraCryptExpander-x64.exe" cd "..\Release\Setup Files\" @@ -24,6 +19,10 @@ del *.xml cd "..\..\Signing" -signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" +rem sign using SHA-1 +signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /fd sha1 /t http://timestamp.verisign.com/scripts/timestamp.dll "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" + +rem sign using SHA-256 +signtool sign /v /a /f %PFXNAME% /p %PFXPASSWORD% /ac TestCertificate\idrix_TestRootCA.crt /as /fd sha256 /tr http://timestamp.geotrust.com/tsa "..\Release\Setup Files\VeraCrypt Setup 1.16.exe" pause \ No newline at end of file -- cgit v1.2.3