VeraCrypt
aboutsummaryrefslogtreecommitdiff
path: root/src/Common/XZip.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/Common/XZip.cpp')
-rw-r--r--src/Common/XZip.cpp3215
1 files changed, 3215 insertions, 0 deletions
diff --git a/src/Common/XZip.cpp b/src/Common/XZip.cpp
new file mode 100644
index 00000000..9ce6de5d
--- /dev/null
+++ b/src/Common/XZip.cpp
@@ -0,0 +1,3215 @@
+// XZip.cpp Version 1.3
+//
+// Authors: Mark Adler et al. (see below)
+//
+// Modified by: Lucian Wischik
+// lu@wischik.com
+//
+// Version 1.0 - Turned C files into just a single CPP file
+// - Made them compile cleanly as C++ files
+// - Gave them simpler APIs
+// - Added the ability to zip/unzip directly in memory without
+// any intermediate files
+//
+// Modified by: Hans Dietrich
+// hdietrich@gmail.com
+//
+// Version 1.3: - Fixed UTC problem
+//
+// Version 1.2: - Many bug fixes. See CodeProject article for list.
+//
+// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()
+// - Changed file names to avoid conflicts with Lucian's files
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Lucian Wischik's comments:
+// --------------------------
+// THIS FILE is almost entirely based upon code by Info-ZIP.
+// It has been modified by Lucian Wischik.
+// The original code may be found at http://www.info-zip.org
+// The original copyright text follows.
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Original authors' comments:
+// ---------------------------
+// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
+// definitive version of this document should be available at
+// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
+//
+// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
+//
+// For the purposes of this copyright and license, "Info-ZIP" is defined as
+// the following set of individuals:
+//
+// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
+// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
+// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
+// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
+// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
+// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
+// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
+//
+// This software is provided "as is", without warranty of any kind, express
+// or implied. In no event shall Info-ZIP or its contributors be held liable
+// for any direct, indirect, incidental, special or consequential damages
+// arising out of the use of or inability to use this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// definition, disclaimer, and this list of conditions.
+//
+// 2. Redistributions in binary form (compiled executables) must reproduce
+// the above copyright notice, definition, disclaimer, and this list of
+// conditions in documentation and/or other materials provided with the
+// distribution. The sole exception to this condition is redistribution
+// of a standard UnZipSFX binary as part of a self-extracting archive;
+// that is permitted without inclusion of this license, as long as the
+// normal UnZipSFX banner has not been removed from the binary or disabled.
+//
+// 3. Altered versions--including, but not limited to, ports to new
+// operating systems, existing ports with new graphical interfaces, and
+// dynamic, shared, or static library versions--must be plainly marked
+// as such and must not be misrepresented as being the original source.
+// Such altered versions also must not be misrepresented as being
+// Info-ZIP releases--including, but not limited to, labeling of the
+// altered versions with the names "Info-ZIP" (or any variation thereof,
+// including, but not limited to, different capitalizations),
+// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
+// Info-ZIP. Such altered versions are further prohibited from
+// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
+// of the Info-ZIP URL(s).
+//
+// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
+// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
+// own source and binary releases.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef _WIN64
+#define _USE_32BIT_TIME_T //+++1.2
+#endif
+
+
+#define STRICT
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+#include <tchar.h>
+#include <time.h>
+#include "xzip.h"
+
+#pragma warning(disable : 4996) // disable bogus deprecation warning
+
+typedef unsigned char uch; // unsigned 8-bit value
+typedef unsigned short ush; // unsigned 16-bit value
+typedef unsigned long ulg; // unsigned 32-bit value
+typedef size_t extent; // file size
+typedef unsigned Pos; // must be at least 32 bits
+typedef unsigned IPos; // A Pos is an index in the character window. Pos is used only for parameter passing
+
+#ifndef EOF
+#define EOF (-1)
+#endif
+
+
+// Error return values. The values 0..4 and 12..18 follow the conventions
+// of PKZIP. The values 4..10 are all assigned to "insufficient memory"
+// by PKZIP, so the codes 5..10 are used here for other purposes.
+#define ZE_MISS -1 // used by procname(), zipbare()
+#define ZE_OK 0 // success
+#define ZE_EOF 2 // unexpected end of zip file
+#define ZE_FORM 3 // zip file structure error
+#define ZE_MEM 4 // out of memory
+#define ZE_LOGIC 5 // internal logic error
+#define ZE_BIG 6 // entry too large to split
+#define ZE_NOTE 7 // invalid comment format
+#define ZE_TEST 8 // zip test (-T) failed or out of memory
+#define ZE_ABORT 9 // user interrupt or termination
+#define ZE_TEMP 10 // error using a temp file
+#define ZE_READ 11 // read or seek error
+#define ZE_NONE 12 // nothing to do
+#define ZE_NAME 13 // missing or empty zip file
+#define ZE_WRITE 14 // error writing to a file
+#define ZE_CREAT 15 // couldn't open to write
+#define ZE_PARMS 16 // bad command line
+#define ZE_OPEN 18 // could not open a specified file to read
+#define ZE_MAXERR 18 // the highest error number
+
+
+// internal file attribute
+#define UNKNOWN (-1)
+#define BINARY 0
+#define ASCII 1
+
+#define BEST -1 // Use best method (deflation or store)
+#define STORE 0 // Store method
+#define DEFLATE 8 // Deflation method
+
+#define CRCVAL_INITIAL 0L
+
+// MSDOS file or directory attributes
+#define MSDOS_HIDDEN_ATTR 0x02
+#define MSDOS_DIR_ATTR 0x10
+
+// Lengths of headers after signatures in bytes
+#define LOCHEAD 26
+#define CENHEAD 42
+#define ENDHEAD 18
+
+// Definitions for extra field handling:
+#define EB_HEADSIZE 4 /* length of a extra field block header */
+#define EB_LEN 2 /* offset of data length field in header */
+#define EB_UT_MINLEN 1 /* minimal UT field contains Flags byte */
+#define EB_UT_FLAGS 0 /* byte offset of Flags field */
+#define EB_UT_TIME1 1 /* byte offset of 1st time value */
+#define EB_UT_FL_MTIME (1 << 0) /* mtime present */
+#define EB_UT_FL_ATIME (1 << 1) /* atime present */
+#define EB_UT_FL_CTIME (1 << 2) /* ctime present */
+#define EB_UT_LEN(n) (EB_UT_MINLEN + 4 * (n))
+#define EB_L_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(3))
+#define EB_C_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(1))
+
+
+// Macros for writing machine integers to little-endian format
+#define PUTSH(a,f) {char _putsh_c=(char)((a)&0xff); wfunc(param,&_putsh_c,1); _putsh_c=(char)((a)>>8); wfunc(param,&_putsh_c,1);}
+#define PUTLG(a,f) {PUTSH((a) & 0xffff,(f)) PUTSH((a) >> 16,(f))}
+
+
+// -- Structure of a ZIP file --
+// Signatures for zip file information headers
+#define LOCSIG 0x04034b50L
+#define CENSIG 0x02014b50L
+#define ENDSIG 0x06054b50L
+#define EXTLOCSIG 0x08074b50L
+
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+// The minimum and maximum match lengths
+
+
+#define WSIZE (0x8000)
+// Maximum window size = 32K. If you are really short of memory, compile
+// with a smaller WSIZE but this reduces the compression ratio for files
+// of size > WSIZE. WSIZE must be a power of two in the current implementation.
+//
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+// Minimum amount of lookahead, except at the end of the input file.
+// See deflate.c for comments about the MIN_MATCH+1.
+//
+
+#define MAX_DIST (WSIZE-MIN_LOOKAHEAD)
+// In order to simplify the code, particularly on 16 bit machines, match
+// distances are limited to MAX_DIST instead of WSIZE.
+//
+
+
+
+
+
+// ===========================================================================
+// Constants
+//
+
+#define MAX_BITS 15
+// All codes must not exceed MAX_BITS bits
+
+#define MAX_BL_BITS 7
+// Bit length codes must not exceed MAX_BL_BITS bits
+
+#define LENGTH_CODES 29
+// number of length codes, not counting the special END_BLOCK code
+
+#define LITERALS 256
+// number of literal bytes 0..255
+
+#define END_BLOCK 256
+// end of block literal code
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+// number of Literal or Length codes, including the END_BLOCK code
+
+#define D_CODES 30
+// number of distance codes
+
+#define BL_CODES 19
+// number of codes used to transfer the bit lengths
+
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+// The three kinds of block type
+
+#define LIT_BUFSIZE 0x8000
+#define DIST_BUFSIZE LIT_BUFSIZE
+// Sizes of match buffers for literals/lengths and distances. There are
+// 4 reasons for limiting LIT_BUFSIZE to 64K:
+// - frequencies can be kept in 16 bit counters
+// - if compression is not successful for the first block, all input data is
+// still in the window so we can still emit a stored block even when input
+// comes from standard input. (This can also be done for all blocks if
+// LIT_BUFSIZE is not greater than 32K.)
+// - if compression is not successful for a file smaller than 64K, we can
+// even emit a stored file instead of a stored block (saving 5 bytes).
+// - creating new Huffman trees less frequently may not provide fast
+// adaptation to changes in the input data statistics. (Take for
+// example a binary file with poorly compressible code followed by
+// a highly compressible string table.) Smaller buffer sizes give
+// fast adaptation but have of course the overhead of transmitting trees
+// more frequently.
+// - I can't count above 4
+// The current code is general and allows DIST_BUFSIZE < LIT_BUFSIZE (to save
+// memory at the expense of compression). Some optimizations would be possible
+// if we rely on DIST_BUFSIZE == LIT_BUFSIZE.
+//
+
+#define REP_3_6 16
+// repeat previous bit length 3-6 times (2 bits of repeat count)
+
+#define REPZ_3_10 17
+// repeat a zero length 3-10 times (3 bits of repeat count)
+
+#define REPZ_11_138 18
+// repeat a zero length 11-138 times (7 bits of repeat count)
+
+#define HEAP_SIZE (2*L_CODES+1)
+// maximum heap size
+
+
+// ===========================================================================
+// Local data used by the "bit string" routines.
+//
+
+#define Buf_size (8 * 2*sizeof(char))
+// Number of bits used within bi_buf. (bi_buf may be implemented on
+// more than 16 bits on some systems.)
+
+// Output a 16 bit value to the bit stream, lower (oldest) byte first
+#if 0 // -----------------------------------------------------------
+#define PUTSHORT(state,w) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size-1) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+#define PUTSHORT(state,w) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size-1) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ if (state.bs.out_offset < state.bs.out_size-1) \
+ { \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \
+ }\
+}
+
+#if 0 // -----------------------------------------------------------
+#define PUTBYTE(state,b) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) (b); \
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+#define PUTBYTE(state,b) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ if (state.bs.out_offset < state.bs.out_size) \
+ state.bs.out_buf[state.bs.out_offset++] = (char) (b); \
+}
+
+// DEFLATE.CPP HEADER
+
+#define HASH_BITS 15
+// For portability to 16 bit machines, do not use values above 15.
+
+#define HASH_SIZE (unsigned)(1<<HASH_BITS)
+#define HASH_MASK (HASH_SIZE-1)
+#define WMASK (WSIZE-1)
+// HASH_SIZE and WSIZE must be powers of two
+
+#define NIL 0
+// Tail of hash chains
+
+#define FAST 4
+#define SLOW 2
+// speed options for the general purpose bit flag
+
+#define TOO_FAR 4096
+// Matches of length 3 are discarded if their distance exceeds TOO_FAR
+
+
+
+#define EQUAL 0
+// result of memcmp for equal strings
+
+
+// ===========================================================================
+// Local data used by the "longest match" routines.
+
+#define H_SHIFT ((HASH_BITS+MIN_MATCH-1)/MIN_MATCH)
+// Number of bits by which ins_h and del_h must be shifted at each
+// input step. It must be such that after MIN_MATCH steps, the oldest
+// byte no longer takes part in the hash key, that is:
+// H_SHIFT * MIN_MATCH >= HASH_BITS
+
+#define max_insert_length max_lazy_match
+// Insert new strings in the hash table only if the match length
+// is not greater than this length. This saves time but degrades compression.
+// max_insert_length is used only for compression levels <= 3.
+
+
+
+const int extra_lbits[LENGTH_CODES] // extra bits for each length code
+ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+const int extra_dbits[D_CODES] // extra bits for each distance code
+ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+const int extra_blbits[BL_CODES]// extra bits for each bit length code
+ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+const uch bl_order[BL_CODES] = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+// The lengths of the bit length codes are sent in order of decreasing
+// probability, to avoid transmitting the lengths for unused bit length codes.
+
+
+typedef struct config {
+ ush good_length; // reduce lazy search above this match length
+ ush max_lazy; // do not perform lazy search above this match length
+ ush nice_length; // quit search above this match length
+ ush max_chain;
+} config;
+
+// Values for max_lazy_match, good_match, nice_match and max_chain_length,
+// depending on the desired pack level (0..9). The values given below have
+// been tuned to exclude worst case performance for pathological files.
+// Better values may be found for specific files.
+//
+
+const config configuration_table[10] = {
+// good lazy nice chain
+ {0, 0, 0, 0}, // 0 store only
+ {4, 4, 8, 4}, // 1 maximum speed, no lazy matches
+ {4, 5, 16, 8}, // 2
+ {4, 6, 32, 32}, // 3
+ {4, 4, 16, 16}, // 4 lazy matches */
+ {8, 16, 32, 32}, // 5
+ {8, 16, 128, 128}, // 6
+ {8, 32, 128, 256}, // 7
+ {32, 128, 258, 1024}, // 8
+ {32, 258, 258, 4096}};// 9 maximum compression */
+
+// Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+// For deflate_fast() (levels <= 3) good is ignored and lazy has a different meaning.
+
+
+
+
+
+// Data structure describing a single value and its code string.
+typedef struct ct_data {
+ union {
+ ush freq; // frequency count
+ ush code; // bit string
+ } fc;
+ union {
+ ush dad; // father node in Huffman tree
+ ush len; // length of bit string
+ } dl;
+} ct_data;
+
+typedef struct tree_desc
+{
+ ct_data *dyn_tree; // the dynamic tree
+ ct_data *static_tree; // corresponding static tree or NULL
+ const int *extra_bits; // extra bits for each code or NULL
+ int extra_base; // base index for extra_bits
+ int elems; // max number of elements in the tree
+ int max_length; // max bit length for the codes
+ int max_code; // largest code with non zero frequency
+} tree_desc;
+
+
+class TTreeState
+{
+public:
+ TTreeState();
+
+ ct_data dyn_ltree[HEAP_SIZE]; // literal and length tree
+ ct_data dyn_dtree[2*D_CODES+1]; // distance tree
+ ct_data static_ltree[L_CODES+2]; // the static literal tree...
+ // ... Since the bit lengths are imposed, there is no need for the L_CODES
+ // extra codes used during heap construction. However the codes 286 and 287
+ // are needed to build a canonical tree (see ct_init below).
+ ct_data static_dtree[D_CODES]; // the static distance tree...
+ // ... (Actually a trivial tree since all codes use 5 bits.)
+ ct_data bl_tree[2*BL_CODES+1]; // Huffman tree for the bit lengths
+
+ tree_desc l_desc;
+ tree_desc d_desc;
+ tree_desc bl_desc;
+
+ ush bl_count[MAX_BITS+1]; // number of codes at each bit length for an optimal tree
+
+ int heap[2*L_CODES+1]; // heap used to build the Huffman trees
+ int heap_len; // number of elements in the heap
+ int heap_max; // element of largest frequency
+ // The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ // The same heap array is used to build all trees.
+
+ uch depth[2*L_CODES+1];
+ // Depth of each subtree used as tie breaker for trees of equal frequency
+
+ uch length_code[MAX_MATCH-MIN_MATCH+1];
+ // length code for each normalized match length (0 == MIN_MATCH)
+
+ uch dist_code[512];
+ // distance codes. The first 256 values correspond to the distances
+ // 3 .. 258, the last 256 values correspond to the top 8 bits of
+ // the 15 bit distances.
+
+ int base_length[LENGTH_CODES];
+ // First normalized length for each code (0 = MIN_MATCH)
+
+ int base_dist[D_CODES];
+ // First normalized distance for each code (0 = distance of 1)
+
+ uch far l_buf[LIT_BUFSIZE]; // buffer for literals/lengths
+ ush far d_buf[DIST_BUFSIZE]; // buffer for distances
+
+ uch flag_buf[(LIT_BUFSIZE/8)];
+ // flag_buf is a bit array distinguishing literals from lengths in
+ // l_buf, and thus indicating the presence or absence of a distance.
+
+ unsigned last_lit; // running index in l_buf
+ unsigned last_dist; // running index in d_buf
+ unsigned last_flags; // running index in flag_buf
+ uch flags; // current flags not yet saved in flag_buf
+ uch flag_bit; // current bit used in flags
+ // bits are filled in flags starting at bit 0 (least significant).
+ // Note: these flags are overkill in the current code since we don't
+ // take advantage of DIST_BUFSIZE == LIT_BUFSIZE.
+
+ ulg opt_len; // bit length of current block with optimal trees
+ ulg static_len; // bit length of current block with static trees
+
+ ulg cmpr_bytelen; // total byte length of compressed file
+ ulg cmpr_len_bits; // number of bits past 'cmpr_bytelen'
+
+ ulg input_len; // total byte length of input file
+ // input_len is for debugging only since we can get it by other means.
+
+ ush *file_type; // pointer to UNKNOWN, BINARY or ASCII
+// int *file_method; // pointer to DEFLATE or STORE
+};
+
+TTreeState::TTreeState()
+{
+ tree_desc a = {dyn_ltree, static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS, 0}; l_desc = a;
+ tree_desc b = {dyn_dtree, static_dtree, extra_dbits, 0, D_CODES, MAX_BITS, 0}; d_desc = b;
+ tree_desc c = {bl_tree, NULL, extra_blbits, 0, BL_CODES, MAX_BL_BITS, 0}; bl_desc = c;
+ last_lit = 0;
+ last_dist = 0;
+ last_flags = 0;
+
+ memset(dyn_ltree, 0, sizeof(dyn_ltree));
+ memset(dyn_dtree, 0, sizeof(dyn_dtree));
+ memset(static_ltree, 0, sizeof(static_ltree));
+ memset(static_dtree, 0, sizeof(static_dtree));
+ memset(bl_tree, 0, sizeof(bl_tree));
+ memset(bl_count, 0, sizeof(bl_count));
+ memset(heap, 0, sizeof(heap));
+ heap_len = 0;
+ heap_max = 0;
+
+ memset(depth, 0, sizeof(depth));
+ memset(length_code, 0, sizeof(length_code));
+ memset(dist_code, 0, sizeof(dist_code));
+ memset(base_length, 0, sizeof(base_length));
+ memset(base_dist, 0, sizeof(base_dist));
+ memset(l_buf, 0, sizeof(l_buf));
+ memset(d_buf, 0, sizeof(d_buf));
+ memset(flag_buf, 0, sizeof(flag_buf));
+
+ last_lit = 0;
+ last_dist = 0;
+ last_flags = 0;
+ flags = 0;
+ flag_bit = 0;
+ opt_len = 0;
+ static_len = 0;
+ cmpr_bytelen = 0;
+ cmpr_len_bits = 0;
+ input_len = 0;
+ file_type = 0;
+}
+
+class TBitState
+{
+public:
+ TBitState()
+ {
+ flush_flg = 0;
+ bi_buf = 0;
+ bi_valid = 0;
+ out_buf = 0;
+ out_offset = 0;
+ out_size = 0;
+ bits_sent = 0;
+ }
+
+ int flush_flg;
+ //
+ unsigned bi_buf;
+ // Output buffer. bits are inserted starting at the bottom (least significant
+ // bits). The width of bi_buf must be at least 16 bits.
+ int bi_valid;
+ // Number of valid bits in bi_buf. All bits above the last valid bit
+ // are always zero.
+ char *out_buf;
+ // Current output buffer.
+ unsigned out_offset;
+ // Current offset in output buffer.
+ // On 16 bit machines, the buffer is limited to 64K.
+ unsigned out_size;
+ // Size of current output buffer
+ ulg bits_sent; // bit length of the compressed data only needed for debugging???
+};
+
+
+class TDeflateState
+{
+public:
+ TDeflateState()
+ {
+ memset(window, 0, sizeof(window));
+ memset(prev, 0, sizeof(prev));
+ memset(head, 0, sizeof(head));
+ window_size = 0;
+ block_start = 0;
+ sliding = 0;
+ ins_h = 0;
+ prev_length = 0;
+ strstart = 0;
+ match_start = 0;
+ eofile = 0;
+ lookahead = 0;
+ max_chain_length = 0;
+ max_lazy_match = 0;
+ good_match = 0;
+ nice_match = 0;
+ }
+
+ uch window[2L*WSIZE];
+ // Sliding window. Input bytes are read into the second half of the window,
+ // and move to the first half later to keep a dictionary of at least WSIZE
+ // bytes. With this organization, matches are limited to a distance of
+ // WSIZE-MAX_MATCH bytes, but this ensures that IO is always
+ // performed with a length multiple of the block size. Also, it limits
+ // the window size to 64K, which is quite useful on MSDOS.
+ // To do: limit the window size to WSIZE+CBSZ if SMALL_MEM (the code would
+ // be less efficient since the data would have to be copied WSIZE/CBSZ times)
+ Pos prev[WSIZE];
+ // Link to older string with same hash index. To limit the size of this
+ // array to 64K, this link is maintained only for the last 32K strings.
+ // An index in this array is thus a window index modulo 32K.
+ Pos head[HASH_SIZE];
+ // Heads of the hash chains or NIL. If your compiler thinks that
+ // HASH_SIZE is a dynamic value, recompile with -DDYN_ALLOC.
+
+ ulg window_size;
+ // window size, 2*WSIZE except for MMAP or BIG_MEM, where it is the
+ // input file length plus MIN_LOOKAHEAD.
+
+ long block_start;
+ // window position at the beginning of the current output block. Gets
+ // negative when the window is moved backwards.
+
+ int sliding;
+ // Set to false when the input file is already in memory
+
+ unsigned ins_h; // hash index of string to be inserted
+
+ unsigned int prev_length;
+ // Length of the best match at previous step. Matches not greater than this
+ // are discarded. This is used in the lazy match evaluation.
+
+ unsigned strstart; // start of string to insert
+ unsigned match_start; // start of matching string
+ int eofile; // flag set at end of input file
+ unsigned lookahead; // number of valid bytes ahead in window
+
+ unsigned max_chain_length;
+ // To speed up deflation, hash chains are never searched beyond this length.
+ // A higher limit improves compression ratio but degrades the speed.
+
+ unsigned int max_lazy_match;
+ // Attempt to find a better match only when the current match is strictly
+ // smaller than this value. This mechanism is used only for compression
+ // levels >= 4.
+
+ unsigned good_match;
+ // Use a faster search when the previous match is longer than this
+
+ int nice_match; // Stop searching when current match exceeds this
+};
+
+
+typedef struct iztimes {
+ __time32_t atime,mtime,ctime;
+} iztimes; // access, modify, create times
+
+typedef struct zlist {
+ ush vem, ver, flg, how; // See central header in zipfile.c for what vem..off are
+ ulg tim, crc, siz, len;
+ extent nam, ext, cext, com; // offset of ext must be >= LOCHEAD
+ ush dsk, att, lflg; // offset of lflg must be >= LOCHEAD
+ ulg atx, off;
+ char name[MAX_PATH]; // File name in zip file
+ char *extra; // Extra field (set only if ext != 0)
+ char *cextra; // Extra in central (set only if cext != 0)
+ char *comment; // Comment (set only if com != 0)
+ char iname[MAX_PATH]; // Internal file name after cleanup
+ char zname[MAX_PATH]; // External version of internal name
+ int mark; // Marker for files to operate on
+ int trash; // Marker for files to delete
+ int dosflag; // Set to force MSDOS file attributes
+ struct zlist far *nxt; // Pointer to next header in list
+} TZipFileInfo;
+
+
+class TState;
+typedef unsigned (*READFUNC)(TState &state, char *buf,unsigned size);
+typedef unsigned (*FLUSHFUNC)(void *param, const char *buf, unsigned *size);
+typedef unsigned (*WRITEFUNC)(void *param, const char *buf, unsigned size);
+
+class TState
+{
+public:
+ TState() //+++1.2
+ {
+ param = 0;
+ level = 0;
+ seekable = FALSE;
+ readfunc = 0;
+ flush_outbuf = 0;
+ err = 0;
+ }
+
+ void *param;
+ int level;
+ bool seekable;
+ READFUNC readfunc;
+ FLUSHFUNC flush_outbuf;
+ TTreeState ts;
+ TBitState bs;
+ TDeflateState ds;
+ const char *err;
+};
+
+void Assert(TState &state,bool cond, const char *msg)
+{ if (cond) return;
+ state.err=msg;
+}
+void __cdecl Trace(const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}
+void __cdecl Tracec(bool ,const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}
+
+// ===========================================================================
+// Local (static) routines in this file.
+//
+
+void init_block (TState &);
+void pqdownheap (TState &,ct_data *tree, int k);
+void gen_bitlen (TState &,tree_desc *desc);
+void gen_codes (TState &state,ct_data *tree, int max_code);
+void build_tree (TState &,tree_desc *desc);
+void scan_tree (TState &,ct_data *tree, int max_code);
+void send_tree (TState &state,ct_data *tree, int max_code);
+int build_bl_tree (TState &);
+void send_all_trees (TState &state,int lcodes, int dcodes, int blcodes);
+void compress_block (TState &state,ct_data *ltree, ct_data *dtree);
+void set_file_type (TState &);
+void send_bits (TState &state, int value, int length);
+unsigned bi_reverse (unsigned code, int len);
+void bi_windup (TState &state);
+void copy_block (TState &state,char *buf, unsigned len, int header);
+
+
+#define send_code(state, c, tree) send_bits(state, tree[c].fc.code, tree[c].dl.len)
+// Send a code of the given tree. c and tree must not have side effects
+
+// alternatively...
+//#define send_code(state, c, tree)
+// { if (state.verbose>1) fprintf(stderr,"\ncd %3d ",(c));
+// send_bits(state, tree[c].fc.code, tree[c].dl.len); }
+
+#define d_code(dist) ((dist) < 256 ? state.ts.dist_code[dist] : state.ts.dist_code[256+((dist)>>7)])
+// Mapping from a distance to a distance code. dist is the distance - 1 and
+// must not have side effects. dist_code[256] and dist_code[257] are never used.
+
+#define Max(a,b) (a >= b ? a : b)
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Allocate the match buffer, initialize the various tables and save the
+ * location of the internal file attribute (ascii/binary) and method
+ * (DEFLATE/STORE).
+ */
+void ct_init(TState &state, ush *attr)
+{
+ int n; /* iterates over tree elements */
+ int bits; /* bit counter */
+ int length; /* length value */
+ int code; /* code value */
+ int dist; /* distance index */
+
+ state.ts.file_type = attr;
+ //state.ts.file_method = method;
+ state.ts.cmpr_bytelen = state.ts.cmpr_len_bits = 0L;
+ state.ts.input_len = 0L;
+
+ if (state.ts.static_dtree[0].dl.len != 0) return; /* ct_init already called */
+
+ /* Initialize the mapping length (0..255) -> length code (0..28) */
+ length = 0;
+ for (code = 0; code < LENGTH_CODES-1; code++) {
+ state.ts.base_length[code] = length;
+ for (n = 0; n < (1<<extra_lbits[code]); n++) {
+ state.ts.length_code[length++] = (uch)code;
+ }
+ }
+ Assert(state,length == 256, "ct_init: length != 256");
+ /* Note that the length 255 (match length 258) can be represented
+ * in two different ways: code 284 + 5 bits or code 285, so we
+ * overwrite length_code[255] to use the best encoding:
+ */
+ state.ts.length_code[length-1] = (uch)code;
+
+ /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+ dist = 0;
+ for (code = 0 ; code < 16; code++) {
+ state.ts.base_dist[code] = dist;
+ for (n = 0; n < (1<<extra_dbits[code]); n++) {
+ state.ts.dist_code[dist++] = (uch)code;
+ }
+ }
+ Assert(state,dist == 256, "ct_init: dist != 256");
+ dist >>= 7; /* from now on, all distances are divided by 128 */
+ for ( ; code < D_CODES; code++) {
+ state.ts.base_dist[code] = dist << 7;
+ for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+ state.ts.dist_code[256 + dist++] = (uch)code;
+ }
+ }
+ Assert(state,dist == 256, "ct_init: 256+dist != 512");
+
+ /* Construct the codes of the static literal tree */
+ for (bits = 0; bits <= MAX_BITS; bits++) state.ts.bl_count[bits] = 0;
+ n = 0;
+ while (n <= 143) state.ts.static_ltree[n++].dl.len = 8, state.ts.bl_count[8]++;
+ while (n <= 255) state.ts.static_ltree[n++].dl.len = 9, state.ts.bl_count[9]++;
+ while (n <= 279) state.ts.static_ltree[n++].dl.len = 7, state.ts.bl_count[7]++;
+ while (n <= 287) state.ts.static_ltree[n++].dl.len = 8, state.ts.bl_count[8]++;
+ /* fc.codes 286 and 287 do not exist, but we must include them in the
+ * tree construction to get a canonical Huffman tree (longest code
+ * all ones)
+ */
+ gen_codes(state,(ct_data *)state.ts.static_ltree, L_CODES+1);
+
+ /* The static distance tree is trivial: */
+ for (n = 0; n < D_CODES; n++) {
+ state.ts.static_dtree[n].dl.len = 5;
+ state.ts.static_dtree[n].fc.code = (ush)bi_reverse(n, 5);
+ }
+
+ /* Initialize the first block of the first file: */
+ init_block(state);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+void init_block(TState &state)
+{
+ int n; /* iterates over tree elements */
+
+ /* Initialize the trees. */
+ for (n = 0; n < L_CODES; n++) state.ts.dyn_ltree[n].fc.freq = 0;
+ for (n = 0; n < D_CODES; n++) state.ts.dyn_dtree[n].fc.freq = 0;
+ for (n = 0; n < BL_CODES; n++) state.ts.bl_tree[n].fc.freq = 0;
+
+ state.ts.dyn_ltree[END_BLOCK].fc.freq = 1;
+ state.ts.opt_len = state.ts.static_len = 0L;
+ state.ts.last_lit = state.ts.last_dist = state.ts.last_flags = 0;
+ state.ts.flags = 0; state.ts.flag_bit = 1;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(tree, top) \
+{\
+ top = state.ts.heap[SMALLEST]; \
+ state.ts.heap[SMALLEST] = state.ts.heap[state.ts.heap_len--]; \
+ pqdownheap(state,tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m) \
+ (tree[n].fc.freq < tree[m].fc.freq || \
+ (tree[n].fc.freq == tree[m].fc.freq && state.ts.depth[n] <= state.ts.depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+void pqdownheap(TState &state,ct_data *tree, int k)
+{
+ int v = state.ts.heap[k];
+ int j = k << 1; /* left son of k */
+ int htemp; /* required because of bug in SASC compiler */
+
+ while (j <= state.ts.heap_len) {
+ /* Set j to the smallest of the two sons: */
+ if (j < state.ts.heap_len && smaller(tree, state.ts.heap[j+1], state.ts.heap[j])) j++;
+
+ /* Exit if v is smaller than both sons */
+ htemp = state.ts.heap[j];
+ if (smaller(tree, v, htemp)) break;
+
+ /* Exchange v with the smallest son */
+ state.ts.heap[k] = htemp;
+ k = j;
+
+ /* And continue down the tree, setting j to the left son of k */
+ j <<= 1;
+ }
+ state.ts.heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ * above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ * array bl_count contains the frequencies for each bit length.
+ * The length opt_len is updated; static_len is also updated if stree is
+ * not null.
+ */
+void gen_bitlen(TState &state,tree_desc *desc)
+{
+ ct_data *tree = desc->dyn_tree;
+ const int *extra = desc->extra_bits;
+ int base = desc->extra_base;
+ int max_code = desc->max_code;
+ int max_length = desc->max_length;
+ ct_data *stree = desc->static_tree;
+ int h; /* heap index */
+ int n, m; /* iterate over the tree elements */
+ int bits; /* bit length */
+ int xbits; /* extra bits */
+ ush f; /* frequency */
+ int overflow = 0; /* number of elements with bit length too large */
+
+ for (bits = 0; bits <= MAX_BITS; bits++) state.ts.bl_count[bits] = 0;
+
+ /* In a first pass, compute the optimal bit lengths (which may
+ * overflow in the case of the bit length tree).
+ */
+ tree[state.ts.heap[state.ts.heap_max]].dl.len = 0; /* root of the heap */
+
+ for (h = state.ts.heap_max+1; h < HEAP_SIZE; h++) {
+ n = state.ts.heap[h];
+ bits = tree[tree[n].dl.dad].dl.len + 1;
+ if (bits > max_length) bits = max_length, overflow++;
+ tree[n].dl.len = (ush)bits;
+ /* We overwrite tree[n].dl.dad which is no longer needed */
+
+ if (n > max_code) continue; /* not a leaf node */
+
+ state.ts.bl_count[bits]++;
+ xbits = 0;
+ if (n >= base) xbits = extra[n-base];
+ f = tree[n].fc.freq;
+ state.ts.opt_len += (ulg)f * (bits + xbits);
+ if (stree) state.ts.static_len += (ulg)f * (stree[n].dl.len + xbits);
+ }
+ if (overflow == 0) return;
+
+ Trace("\nbit length overflow\n");
+ /* This happens for example on obj2 and pic of the Calgary corpus */
+
+ /* Find the first bit length which could increase: */
+ do {
+ bits = max_length-1;
+ while (state.ts.bl_count[bits] == 0) bits--;
+ state.ts.bl_count[bits]--; /* move one leaf down the tree */
+ state.ts.bl_count[bits+1] += (ush)2; /* move one overflow item as its brother */
+ state.ts.bl_count[max_length]--;
+ /* The brother of the overflow item also moves one step up,
+ * but this does not affect bl_count[max_length]
+ */
+ overflow -= 2;
+ } while (overflow > 0);
+
+ /* Now recompute all bit lengths, scanning in increasing frequency.
+ * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+ * lengths instead of fixing only the wrong ones. This idea is taken
+ * from 'ar' written by Haruhiko Okumura.)
+ */
+ for (bits = max_length; bits != 0; bits--) {
+ n = state.ts.bl_count[bits];
+ while (n != 0) {
+ m = state.ts.heap[--h];
+ if (m > max_code) continue;
+ if (tree[m].dl.len != (ush)bits) {
+ Trace("code %d bits %d->%d\n", m, tree[m].dl.len, bits);
+ state.ts.opt_len += ((long)bits-(long)tree[m].dl.len)*(long)tree[m].fc.freq;
+ tree[m].dl.len = (ush)bits;
+ }
+ n--;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ * zero code length.
+ */
+void gen_codes (TState &state, ct_data *tree, int max_code)
+{
+ ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+ ush code = 0; /* running code value */
+ int bits; /* bit index */
+ int n; /* code index */
+
+ /* The distribution counts are first used to generate the code values
+ * without bit reversal.
+ */
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ next_code[bits] = code = (ush)((code + state.ts.bl_count[bits-1]) << 1);
+ }
+ /* Check that the bit counts in bl_count are consistent. The last code
+ * must be all ones.
+ */
+ Assert(state,code + state.ts.bl_count[MAX_BITS]-1 == (1<< ((ush) MAX_BITS)) - 1,
+ "inconsistent bit counts");
+ Trace("\ngen_codes: max_code %d ", max_code);
+
+ for (n = 0; n <= max_code; n++) {
+ int len = tree[n].dl.len;
+ if (len == 0) continue;
+ /* Now reverse the bits */
+ tree[n].fc.code = (ush)bi_reverse(next_code[len]++, len);
+
+ //Tracec(tree != state.ts.static_ltree, "\nn %3d %c l %2d c %4x (%x) ", n, (isgraph(n) ? n : ' '), len, tree[n].fc.code, next_code[len]-1);
+ }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ * and corresponding code. The length opt_len is updated; static_len is
+ * also updated if stree is not null. The field max_code is set.
+ */
+void build_tree(TState &state,tree_desc *desc)
+{
+ ct_data *tree = desc->dyn_tree;
+ ct_data *stree = desc->static_tree;
+ int elems = desc->elems;
+ int n, m; /* iterate over heap elements */
+ int max_code = -1; /* largest code with non zero frequency */
+ int node = elems; /* next internal node of the tree */
+
+ /* Construct the initial heap, with least frequent element in
+ * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+ * heap[0] is not used.
+ */
+ state.ts.heap_len = 0, state.ts.heap_max = HEAP_SIZE;
+
+ for (n = 0; n < elems; n++) {
+ if (tree[n].fc.freq != 0) {
+ state.ts.heap[++state.ts.heap_len] = max_code = n;
+ state.ts.depth[n] = 0;
+ } else {
+ tree[n].dl.len = 0;
+ }
+ }
+
+ /* The pkzip format requires that at least one distance code exists,
+ * and that at least one bit should be sent even if there is only one
+ * possible code. So to avoid special checks later on we force at least
+ * two codes of non zero frequency.
+ */
+ while (state.ts.heap_len < 2) {
+ int newcp = state.ts.heap[++state.ts.heap_len] = (max_code < 2 ? ++max_code : 0);
+ tree[newcp].fc.freq = 1;
+ state.ts.depth[newcp] = 0;
+ state.ts.opt_len--; if (stree) state.ts.static_len -= stree[newcp].dl.len;
+ /* new is 0 or 1 so it does not have extra bits */
+ }
+ desc->max_code = max_code;
+
+ /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+ * establish sub-heaps of increasing lengths:
+ */
+ for (n = state.ts.heap_len/2; n >= 1; n--) pqdownheap(state,tree, n);
+
+ /* Construct the Huffman tree by repeatedly combining the least two
+ * frequent nodes.
+ */
+ do {
+ pqremove(tree, n); /* n = node of least frequency */
+ m = state.ts.heap[SMALLEST]; /* m = node of next least frequency */
+
+ state.ts.heap[--state.ts.heap_max] = n; /* keep the nodes sorted by frequency */
+ state.ts.heap[--state.ts.heap_max] = m;
+
+ /* Create a new node father of n and m */
+ tree[node].fc.freq = (ush)(tree[n].fc.freq + tree[m].fc.freq);
+ state.ts.depth[node] = (uch) (Max(state.ts.depth[n], state.ts.depth[m]) + 1);
+ tree[n].dl.dad = tree[m].dl.dad = (ush)node;
+ /* and insert the new node in the heap */
+ state.ts.heap[SMALLEST] = node++;
+ pqdownheap(state,tree, SMALLEST);
+
+ } while (state.ts.heap_len >= 2);
+
+ state.ts.heap[--state.ts.heap_max] = state.ts.heap[SMALLEST];
+
+ /* At this point, the fields freq and dad are set. We can now
+ * generate the bit lengths.
+ */
+ gen_bitlen(state,(tree_desc *)desc);
+
+ /* The field len is now set, we can generate the bit codes */
+ gen_codes (state,(ct_data *)tree, max_code);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree. Updates opt_len to take into account the repeat
+ * counts. (The contribution of the bit length codes will be added later
+ * during the construction of bl_tree.)
+ */
+void scan_tree (TState &state,ct_data *tree, int max_code)
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].dl.len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ if (nextlen == 0) max_count = 138, min_count = 3;
+ tree[max_code+1].dl.len = (ush)-1; /* guard */
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].dl.len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ state.ts.bl_tree[curlen].fc.freq = (ush)(state.ts.bl_tree[curlen].fc.freq + count);
+ } else if (curlen != 0) {
+ if (curlen != prevlen) state.ts.bl_tree[curlen].fc.freq++;
+ state.ts.bl_tree[REP_3_6].fc.freq++;
+ } else if (count <= 10) {
+ state.ts.bl_tree[REPZ_3_10].fc.freq++;
+ } else {
+ state.ts.bl_tree[REPZ_11_138].fc.freq++;
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+void send_tree (TState &state, ct_data *tree, int max_code)
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].dl.len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ /* tree[max_code+1].dl.len = -1; */ /* guard already set */
+ if (nextlen == 0) max_count = 138, min_count = 3;
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].dl.len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ do { send_code(state, curlen, state.ts.bl_tree); } while (--count != 0);
+
+ } else if (curlen != 0) {
+ if (curlen != prevlen) {
+ send_code(state, curlen, state.ts.bl_tree); count--;
+ }
+ Assert(state,count >= 3 && count <= 6, " 3_6?");
+ send_code(state,REP_3_6, state.ts.bl_tree); send_bits(state,count-3, 2);
+
+ } else if (count <= 10) {
+ send_code(state,REPZ_3_10, state.ts.bl_tree); send_bits(state,count-3, 3);
+
+ } else {
+ send_code(state,REPZ_11_138, state.ts.bl_tree); send_bits(state,count-11, 7);
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+int build_bl_tree(TState &state)
+{
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ /* Determine the bit length frequencies for literal and distance trees */
+ scan_tree(state,(ct_data *)state.ts.dyn_ltree, state.ts.l_desc.max_code);
+ scan_tree(state,(ct_data *)state.ts.dyn_dtree, state.ts.d_desc.max_code);
+
+ /* Build the bit length tree: */
+ build_tree(state,(tree_desc *)(&state.ts.bl_desc));
+ /* opt_len now includes the length of the tree representations, except
+ * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+ */
+
+ /* Determine the number of bit length codes to send. The pkzip format
+ * requires that at least 4 bit length codes be sent. (appnote.txt says
+ * 3 but the actual value used is 4.)
+ */
+ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+ if (state.ts.bl_tree[bl_order[max_blindex]].dl.len != 0) break;
+ }
+ /* Update opt_len to include the bit length tree and counts */
+ state.ts.opt_len += 3*(max_blindex+1) + 5+5+4;
+ Trace("\ndyn trees: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+
+ return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+void send_all_trees(TState &state,int lcodes, int dcodes, int blcodes)
+{
+ int rank; /* index in bl_order */
+
+ Assert(state,lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+ Assert(state,lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+ "too many codes");
+ Trace("\nbl counts: ");
+ send_bits(state,lcodes-257, 5);
+ /* not +255 as stated in appnote.txt 1.93a or -256 in 2.04c */
+ send_bits(state,dcodes-1, 5);
+ send_bits(state,blcodes-4, 4); /* not -3 as stated in appnote.txt */
+ for (rank = 0; rank < blcodes; rank++) {
+ Trace("\nbl code %2d ", bl_order[rank]);
+ send_bits(state,state.ts.bl_tree[bl_order[rank]].dl.len, 3);
+ }
+ Trace("\nbl tree: sent %ld", state.bs.bits_sent);
+
+ send_tree(state,(ct_data *)state.ts.dyn_ltree, lcodes-1); /* send the literal tree */
+ Trace("\nlit tree: sent %ld", state.bs.bits_sent);
+
+ send_tree(state,(ct_data *)state.ts.dyn_dtree, dcodes-1); /* send the distance tree */
+ Trace("\ndist tree: sent %ld", state.bs.bits_sent);
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file. This function
+ * returns the total compressed length (in bytes) for the file so far.
+ */
+ulg flush_block(TState &state,char *buf, ulg stored_len, int eof)
+{
+ ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ state.ts.flag_buf[state.ts.last_flags] = state.ts.flags; /* Save the flags for the last 8 items */
+
+ /* Check if the file is ascii or binary */
+ if (*state.ts.file_type == (ush)UNKNOWN) set_file_type(state);
+
+ /* Construct the literal and distance trees */
+ build_tree(state,(tree_desc *)(&state.ts.l_desc));
+ Trace("\nlit data: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+
+ build_tree(state,(tree_desc *)(&state.ts.d_desc));
+ Trace("\ndist data: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+ /* At this point, opt_len and static_len are the total bit lengths of
+ * the compressed block data, excluding the tree representations.
+ */
+
+ /* Build the bit length tree for the above two trees, and get the index
+ * in bl_order of the last bit length code to send.
+ */
+ max_blindex = build_bl_tree(state);
+
+ /* Determine the best encoding. Compute first the block length in bytes */
+ opt_lenb = (state.ts.opt_len+3+7)>>3;
+ static_lenb = (state.ts.static_len+3+7)>>3;
+ state.ts.input_len += stored_len; /* for debugging only */
+
+ Trace("\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u dist %u ",
+ opt_lenb, state.ts.opt_len, static_lenb, state.ts.static_len, stored_len,
+ state.ts.last_lit, state.ts.last_dist);
+
+ if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+ // Originally, zip allowed the file to be transformed from a compressed
+ // into a stored file in the case where compression failed, there
+ // was only one block, and it was allowed to change. I've removed this
+ // possibility since the code's cleaner if no changes are allowed.
+ //if (stored_len <= opt_lenb && eof && state.ts.cmpr_bytelen == 0L
+ // && state.ts.cmpr_len_bits == 0L && state.seekable)
+ //{ // && state.ts.file_method != NULL
+ // // Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there:
+ // Assert(state,buf!=NULL,"block vanished");
+ // copy_block(state,buf, (unsigned)stored_len, 0); // without header
+ // state.ts.cmpr_bytelen = stored_len;
+ // Assert(state,false,"unimplemented *state.ts.file_method = STORE;");
+ // //*state.ts.file_method = STORE;
+ //}
+ //else
+ if (stored_len+4 <= opt_lenb && buf != (char*)NULL) {
+ /* 4: two words for the lengths */
+ /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+ * Otherwise we can't have processed more than WSIZE input bytes since
+ * the last block flush, because compression would have been
+ * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+ * transform a block into a stored block.
+ */
+ send_bits(state,(STORED_BLOCK<<1)+eof, 3); /* send block type */
+ state.ts.cmpr_bytelen += ((state.ts.cmpr_len_bits + 3 + 7) >> 3) + stored_len + 4;
+ state.ts.cmpr_len_bits = 0L;
+
+ copy_block(state,buf, (unsigned)stored_len, 1); /* with header */
+ }
+ else if (static_lenb == opt_lenb) {
+ send_bits(state,(STATIC_TREES<<1)+eof, 3);
+ compress_block(state,(ct_data *)state.ts.static_ltree, (ct_data *)state.ts.static_dtree);
+ state.ts.cmpr_len_bits += 3 + state.ts.static_len;
+ state.ts.cmpr_bytelen += state.ts.cmpr_len_bits >> 3;
+ state.ts.cmpr_len_bits &= 7L;
+ }
+ else {
+ send_bits(state,(DYN_TREES<<1)+eof, 3);
+ send_all_trees(state,state.ts.l_desc.max_code+1, state.ts.d_desc.max_code+1, max_blindex+1);
+ compress_block(state,(ct_data *)state.ts.dyn_ltree, (ct_data *)state.ts.dyn_dtree);
+ state.ts.cmpr_len_bits += 3 + state.ts.opt_len;
+ state.ts.cmpr_bytelen += state.ts.cmpr_len_bits >> 3;
+ state.ts.cmpr_len_bits &= 7L;
+ }
+ Assert(state,((state.ts.cmpr_bytelen << 3) + state.ts.cmpr_len_bits) == state.bs.bits_sent, "bad compressed size");
+ init_block(state);
+
+ if (eof) {
+ // Assert(state,input_len == isize, "bad input size");
+ bi_windup(state);
+ state.ts.cmpr_len_bits += 7; /* align on byte boundary */
+ }
+ Trace("\n");
+
+ return state.ts.cmpr_bytelen + (state.ts.cmpr_len_bits >> 3);
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int ct_tally (TState &state,int dist, int lc)
+{
+ state.ts.l_buf[state.ts.last_lit++] = (uch)lc;
+ if (dist == 0) {
+ /* lc is the unmatched char */
+ state.ts.dyn_ltree[lc].fc.freq++;
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ dist--; /* dist = match distance - 1 */
+ Assert(state,(ush)dist < (ush)MAX_DIST &&
+ (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+ (ush)d_code(dist) < (ush)D_CODES, "ct_tally: bad match");
+
+ state.ts.dyn_ltree[state.ts.length_code[lc]+LITERALS+1].fc.freq++;
+ state.ts.dyn_dtree[d_code(dist)].fc.freq++;
+
+ state.ts.d_buf[state.ts.last_dist++] = (ush)dist;
+ state.ts.flags |= state.ts.flag_bit;
+ }
+ state.ts.flag_bit <<= 1;
+
+ /* Output the flags if they fill a byte: */
+ if ((state.ts.last_lit & 7) == 0) {
+ state.ts.flag_buf[state.ts.last_flags++] = state.ts.flags;
+ state.ts.flags = 0, state.ts.flag_bit = 1;
+ }
+ /* Try to guess if it is profitable to stop the current block here */
+ if (state.level > 2 && (state.ts.last_lit & 0xfff) == 0) {
+ /* Compute an upper bound for the compressed length */
+ ulg out_length = (ulg)state.ts.last_lit*8L;
+ ulg in_length = (ulg)state.ds.strstart-state.ds.block_start;
+ int dcode;
+ for (dcode = 0; dcode < D_CODES; dcode++) {
+ out_length += (ulg)state.ts.dyn_dtree[dcode].fc.freq*(5L+extra_dbits[dcode]);
+ }
+ out_length >>= 3;
+ Trace("\nlast_lit %u, last_dist %u, in %ld, out ~%ld(%ld%%) ",
+ state.ts.last_lit, state.ts.last_dist, in_length, out_length,
+ 100L - out_length*100L/in_length);
+ if (state.ts.last_dist < state.ts.last_lit/2 && out_length < in_length/2) return 1;
+ }
+ return (state.ts.last_lit == LIT_BUFSIZE-1 || state.ts.last_dist == DIST_BUFSIZE);
+ /* We avoid equality with LIT_BUFSIZE because of wraparound at 64K
+ * on 16 bit machines and because stored blocks are restricted to
+ * 64K-1 bytes.
+ */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+void compress_block(TState &state,ct_data *ltree, ct_data *dtree)
+{
+ unsigned dist; /* distance of matched string */
+ int lc; /* match length or unmatched char (if dist == 0) */
+ unsigned lx = 0; /* running index in l_buf */
+ unsigned dx = 0; /* running index in d_buf */
+ unsigned fx = 0; /* running index in flag_buf */
+ uch flag = 0; /* current flags */
+ unsigned code; /* the code to send */
+ int extra; /* number of extra bits to send */
+
+ if (state.ts.last_lit != 0) do {
+ if ((lx & 7) == 0) flag = state.ts.flag_buf[fx++];
+ lc = state.ts.l_buf[lx++];
+ if ((flag & 1) == 0) {
+ send_code(state,lc, ltree); /* send a literal byte */
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ code = state.ts.length_code[lc];
+ send_code(state,code+LITERALS+1, ltree); /* send the length code */
+ extra = extra_lbits[code];
+ if (extra != 0) {
+ lc -= state.ts.base_length[code];
+ send_bits(state,lc, extra); /* send the extra length bits */
+ }
+ dist = state.ts.d_buf[dx++];
+ /* Here, dist is the match distance - 1 */
+ code = d_code(dist);
+ Assert(state,code < D_CODES, "bad d_code");
+
+ send_code(state,code, dtree); /* send the distance code */
+ extra = extra_dbits[code];
+ if (extra != 0) {
+ dist -= state.ts.base_dist[code];
+ send_bits(state,dist, extra); /* send the extra distance bits */
+ }
+ } /* literal or match pair ? */
+ flag >>= 1;
+ } while (lx < state.ts.last_lit);
+
+ send_code(state,END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Set the file type to ASCII or BINARY, using a crude approximation:
+ * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
+ * IN assertion: the fields freq of dyn_ltree are set and the total of all
+ * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ */
+void set_file_type(TState &state)
+{
+ int n = 0;
+ unsigned ascii_freq = 0;
+ unsigned bin_freq = 0;
+ while (n < 7) bin_freq += state.ts.dyn_ltree[n++].fc.freq;
+ while (n < 128) ascii_freq += state.ts.dyn_ltree[n++].fc.freq;
+ while (n < LITERALS) bin_freq += state.ts.dyn_ltree[n++].fc.freq;
+ *state.ts.file_type = (ush)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
+}
+
+
+/* ===========================================================================
+ * Initialize the bit string routines.
+ */
+void bi_init (TState &state,char *tgt_buf, unsigned tgt_size, int flsh_allowed)
+{
+ state.bs.out_buf = tgt_buf;
+ state.bs.out_size = tgt_size;
+ state.bs.out_offset = 0;
+ state.bs.flush_flg = flsh_allowed;
+
+ state.bs.bi_buf = 0;
+ state.bs.bi_valid = 0;
+ state.bs.bits_sent = 0L;
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+void send_bits(TState &state,int value, int length)
+{
+ Assert(state,length > 0 && length <= 15, "invalid length");
+ state.bs.bits_sent += (ulg)length;
+ /* If not enough room in bi_buf, use (bi_valid) bits from bi_buf and
+ * (Buf_size - bi_valid) bits from value to flush the filled bi_buf,
+ * then fill in the rest of (value), leaving (length - (Buf_size-bi_valid))
+ * unused bits in bi_buf.
+ */
+ state.bs.bi_buf |= (value << state.bs.bi_valid);
+ state.bs.bi_valid += length;
+ if (state.bs.bi_valid > (int)Buf_size) {
+ PUTSHORT(state,state.bs.bi_buf);
+ state.bs.bi_valid -= Buf_size;
+ state.bs.bi_buf = (unsigned)value >> (length - state.bs.bi_valid);
+ }
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+unsigned bi_reverse(unsigned code, int len)
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
+ * Write out any remaining bits in an incomplete byte.
+ */
+void bi_windup(TState &state)
+{
+ if (state.bs.bi_valid > 8) {
+ PUTSHORT(state,state.bs.bi_buf);
+ } else if (state.bs.bi_valid > 0) {
+ PUTBYTE(state,state.bs.bi_buf);
+ }
+ if (state.bs.flush_flg) {
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset);
+ }
+ state.bs.bi_buf = 0;
+ state.bs.bi_valid = 0;
+ state.bs.bits_sent = (state.bs.bits_sent+7) & ~7;
+}
+
+/* ===========================================================================
+ * Copy a stored block to the zip file, storing first the length and its
+ * one's complement if requested.
+ */
+void copy_block(TState &state, char *block, unsigned len, int header)
+{
+ bi_windup(state); /* align on byte boundary */
+
+ if (header) {
+ PUTSHORT(state,(ush)len);
+ PUTSHORT(state,(ush)~len);
+ state.bs.bits_sent += 2*16;
+ }
+ if (state.bs.flush_flg) {
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset);
+ state.bs.out_offset = len;
+ state.flush_outbuf(state.param,block, &state.bs.out_offset);
+ } else if (state.bs.out_offset + len > state.bs.out_size) {
+ Assert(state,false,"output buffer too small for in-memory compression");
+ } else {
+ memcpy(state.bs.out_buf + state.bs.out_offset, block, len);
+ state.bs.out_offset += len;
+ }
+ state.bs.bits_sent += (ulg)len<<3;
+}
+
+
+
+
+
+
+
+
+/* ===========================================================================
+ * Prototypes for functions.
+ */
+
+void fill_window (TState &state);
+ulg deflate_fast (TState &state);
+
+int longest_match (TState &state,IPos cur_match);
+
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(h,c) (h = (((h)<<H_SHIFT) ^ (c)) & HASH_MASK)
+
+/* ===========================================================================
+ * Insert string s in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of s are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#define INSERT_STRING(s, match_head) \
+ (UPDATE_HASH(state.ds.ins_h, state.ds.window[(s) + (MIN_MATCH-1)]), \
+ state.ds.prev[(s) & WMASK] = match_head = state.ds.head[state.ds.ins_h], \
+ state.ds.head[state.ds.ins_h] = (s))
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new file
+ *
+ * IN assertion: window_size is > 0 if the input file is already read or
+ * mmap'ed in the window[] array, 0 otherwise. In the first case,
+ * window_size is sufficient to contain the whole input file plus
+ * MIN_LOOKAHEAD bytes (to avoid referencing memory beyond the end
+ * of window[] when looking for matches towards the end).
+ */
+void lm_init (TState &state, int pack_level, ush *flags)
+{
+ register unsigned j;
+
+ Assert(state,pack_level>=1 && pack_level<=8,"bad pack level");
+
+ /* Do not slide the window if the whole input is already in memory
+ * (window_size > 0)
+ */
+ state.ds.sliding = 0;
+ if (state.ds.window_size == 0L) {
+ state.ds.sliding = 1;
+ state.ds.window_size = (ulg)2L*WSIZE;
+ }
+
+ /* Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+ state.ds.head[HASH_SIZE-1] = NIL;
+ memset((char*)state.ds.head, NIL, (unsigned)(HASH_SIZE-1)*sizeof(*state.ds.head));
+
+ /* Set the default configuration parameters:
+ */
+ state.ds.max_lazy_match = configuration_table[pack_level].max_lazy;
+ state.ds.good_match = configuration_table[pack_level].good_length;
+ state.ds.nice_match = configuration_table[pack_level].nice_length;
+ state.ds.max_chain_length = configuration_table[pack_level].max_chain;
+ if (pack_level <= 2) {
+ *flags |= FAST;
+ } else if (pack_level >= 8) {
+ *flags |= SLOW;
+ }
+ /* ??? reduce max_chain_length for binary files */
+
+ state.ds.strstart = 0;
+ state.ds.block_start = 0L;
+
+ j = WSIZE;
+ j <<= 1; // Can read 64K in one step
+ state.ds.lookahead = state.readfunc(state, (char*)state.ds.window, j);
+
+ if (state.ds.lookahead == 0 || state.ds.lookahead == (unsigned)EOF) {
+ state.ds.eofile = 1, state.ds.lookahead = 0;
+ return;
+ }
+ state.ds.eofile = 0;
+ /* Make sure that we always have enough lookahead. This is important
+ * if input comes from a device such as a tty.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+
+ state.ds.ins_h = 0;
+ for (j=0; j<MIN_MATCH-1; j++) UPDATE_HASH(state.ds.ins_h, state.ds.window[j]);
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but this is
+ * not important since only literal bytes will be emitted.
+ */
+}
+
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ */
+// For 80x86 and 680x0 and ARM, an optimized version is in match.asm or
+// match.S. The code is functionally equivalent, so you can use the C version
+// if desired. Which I do so desire!
+int longest_match(TState &state,IPos cur_match)
+{
+ unsigned chain_length = state.ds.max_chain_length; /* max hash chain length */
+ register uch far *scan = state.ds.window + state.ds.strstart; /* current string */
+ register uch far *match; /* matched string */
+ register int len; /* length of current match */
+ int best_len = state.ds.prev_length; /* best match length so far */
+ IPos limit = state.ds.strstart > (IPos)MAX_DIST ? state.ds.strstart - (IPos)MAX_DIST : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+
+ // The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ // It is easy to get rid of this optimization if necessary.
+ Assert(state,HASH_BITS>=8 && MAX_MATCH==258,"Code too clever");
+
+
+
+ register uch far *strend = state.ds.window + state.ds.strstart + MAX_MATCH;
+ register uch scan_end1 = scan[best_len-1];
+ register uch scan_end = scan[best_len];
+
+ /* Do not waste too much time if we already have a good match: */
+ if (state.ds.prev_length >= state.ds.good_match) {
+ chain_length >>= 2;
+ }
+
+ Assert(state,state.ds.strstart <= state.ds.window_size-MIN_LOOKAHEAD, "insufficient lookahead");
+
+ do {
+ Assert(state,cur_match < state.ds.strstart, "no future");
+ match = state.ds.window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2:
+ */
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(state,scan <= state.ds.window+(unsigned)(state.ds.window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+
+ if (len > best_len) {
+ state.ds.match_start = cur_match;
+ best_len = len;
+ if (len >= state.ds.nice_match) break;
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+ }
+ } while ((cur_match = state.ds.prev[cur_match & WMASK]) > limit
+ && --chain_length != 0);
+
+ return best_len;
+}
+
+
+
+#define check_match(state,start, match, length)
+// or alternatively...
+//void check_match(TState &state,IPos start, IPos match, int length)
+//{ // check that the match is indeed a match
+// if (memcmp((char*)state.ds.window + match,
+// (char*)state.ds.window + start, length) != EQUAL) {
+// fprintf(stderr,
+// " start %d, match %d, length %d\n",
+// start, match, length);
+// error("invalid match");
+// }
+// if (state.verbose > 1) {
+// fprintf(stderr,"\\[%d,%d]", start-match, length);
+// do { fprintf(stdout,"%c",state.ds.window[start++]); } while (--length != 0);
+// }
+//}
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead, and sets eofile if end of input file.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD && strstart + lookahead > 0
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or eofile is set; file reads are
+ * performed for at least two bytes (required for the translate_eol option).
+ */
+void fill_window(TState &state)
+{
+ register unsigned n, m;
+ unsigned more; /* Amount of free space at the end of the window. */
+
+ do {
+ more = (unsigned)(state.ds.window_size - (ulg)state.ds.lookahead - (ulg)state.ds.strstart);
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ if (more == (unsigned)EOF) {
+ /* Very unlikely, but possible on 16 bit machine if strstart == 0
+ * and lookahead == 1 (input done one byte at time)
+ */
+ more--;
+
+ /* For MMAP or BIG_MEM, the whole input file is already in memory so
+ * we must not perform sliding. We must however call (*read_buf)() in
+ * order to compute the crc, update lookahead and possibly set eofile.
+ */
+ } else if (state.ds.strstart >= WSIZE+MAX_DIST && state.ds.sliding) {
+
+ /* By the IN assertion, the window is not empty so we can't confuse
+ * more == 0 with more == 64K on a 16 bit machine.
+ */
+ memcpy((char*)state.ds.window, (char*)state.ds.window+WSIZE, (unsigned)WSIZE);
+ state.ds.match_start -= WSIZE;
+ state.ds.strstart -= WSIZE; /* we now have strstart >= MAX_DIST: */
+
+ state.ds.block_start -= (long) WSIZE;
+
+ for (n = 0; n < HASH_SIZE; n++) {
+ m = state.ds.head[n];
+ state.ds.head[n] = (Pos)(m >= WSIZE ? m-WSIZE : NIL);
+ }
+ for (n = 0; n < WSIZE; n++) {
+ m = state.ds.prev[n];
+ state.ds.prev[n] = (Pos)(m >= WSIZE ? m-WSIZE : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ }
+ more += WSIZE;
+ }
+ if (state.ds.eofile) return;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the MMAP or BIG_MEM case (not yet supported in gzip),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(state,more >= 2, "more < 2");
+
+ n = state.readfunc(state, (char*)state.ds.window+state.ds.strstart+state.ds.lookahead, more);
+
+ if (n == 0 || n == (unsigned)EOF) {
+ state.ds.eofile = 1;
+ } else {
+ state.ds.lookahead += n;
+ }
+ } while (state.ds.lookahead < MIN_LOOKAHEAD && !state.ds.eofile);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK(state,eof) \
+ flush_block(state,state.ds.block_start >= 0L ? (char*)&state.ds.window[(unsigned)state.ds.block_start] : \
+ (char*)NULL, (long)state.ds.strstart - state.ds.block_start, (eof))
+
+/* ===========================================================================
+ * Processes a new input file and return its compressed length. This
+ * function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+ulg deflate_fast(TState &state)
+{
+ IPos hash_head = NIL; /* head of the hash chain */
+ int flush; /* set if current block must be flushed */
+ unsigned match_length = 0; /* length of best match */
+
+ state.ds.prev_length = MIN_MATCH-1;
+ while (state.ds.lookahead != 0) {
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (state.ds.lookahead >= MIN_MATCH)
+ INSERT_STRING(state.ds.strstart, hash_head);
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && state.ds.strstart - hash_head <= MAX_DIST) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ /* Do not look for matches beyond the end of the input.
+ * This is necessary to make deflate deterministic.
+ */
+ if ((unsigned)state.ds.nice_match > state.ds.lookahead) state.ds.nice_match = (int)state.ds.lookahead;
+ match_length = longest_match (state,hash_head);
+ /* longest_match() sets match_start */
+ if (match_length > state.ds.lookahead) match_length = state.ds.lookahead;
+ }
+ if (match_length >= MIN_MATCH) {
+ check_match(state,state.ds.strstart, state.ds.match_start, match_length);
+
+ flush = ct_tally(state,state.ds.strstart-state.ds.match_start, match_length - MIN_MATCH);
+
+ state.ds.lookahead -= match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+ if (match_length <= state.ds.max_insert_length
+ && state.ds.lookahead >= MIN_MATCH) {
+ match_length--; /* string at strstart already in hash table */
+ do {
+ state.ds.strstart++;
+ INSERT_STRING(state.ds.strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--match_length != 0);
+ state.ds.strstart++;
+ } else {
+ state.ds.strstart += match_length;
+ match_length = 0;
+ state.ds.ins_h = state.ds.window[state.ds.strstart];
+ UPDATE_HASH(state.ds.ins_h, state.ds.window[state.ds.strstart+1]);
+ Assert(state,MIN_MATCH==3,"Call UPDATE_HASH() MIN_MATCH-3 more times");
+ }
+ } else {
+ /* No match, output a literal byte */
+ flush = ct_tally (state,0, state.ds.window[state.ds.strstart]);
+ state.ds.lookahead--;
+ state.ds.strstart++;
+ }
+ if (flush) FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+ }
+ return FLUSH_BLOCK(state,1); /* eof */
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+ulg deflate(TState &state)
+{
+ IPos hash_head = NIL; /* head of hash chain */
+ IPos prev_match; /* previous match */
+ int flush; /* set if current block must be flushed */
+ int match_available = 0; /* set if previous match exists */
+ register unsigned match_length = MIN_MATCH-1; /* length of best match */
+
+ if (state.level <= 3) return deflate_fast(state); /* optimized for speed */
+
+ /* Process the input block. */
+ while (state.ds.lookahead != 0) {
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (state.ds.lookahead >= MIN_MATCH)
+ INSERT_STRING(state.ds.strstart, hash_head);
+
+ /* Find the longest match, discarding those <= prev_length.
+ */
+ state.ds.prev_length = match_length, prev_match = state.ds.match_start;
+ match_length = MIN_MATCH-1;
+
+ if (hash_head != NIL && state.ds.prev_length < state.ds.max_lazy_match &&
+ state.ds.strstart - hash_head <= MAX_DIST) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ /* Do not look for matches beyond the end of the input.
+ * This is necessary to make deflate deterministic.
+ */
+ if ((unsigned)state.ds.nice_match > state.ds.lookahead) state.ds.nice_match = (int)state.ds.lookahead;
+ match_length = longest_match (state,hash_head);
+ /* longest_match() sets match_start */
+ if (match_length > state.ds.lookahead) match_length = state.ds.lookahead;
+
+ /* Ignore a length 3 match if it is too distant: */
+ if (match_length == MIN_MATCH && state.ds.strstart-state.ds.match_start > TOO_FAR){
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ match_length = MIN_MATCH-1;
+ }
+ }
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (state.ds.prev_length >= MIN_MATCH && match_length <= state.ds.prev_length) {
+ unsigned max_insert = state.ds.strstart + state.ds.lookahead - MIN_MATCH;
+ check_match(state,state.ds.strstart-1, prev_match, state.ds.prev_length);
+ flush = ct_tally(state,state.ds.strstart-1-prev_match, state.ds.prev_length - MIN_MATCH);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted.
+ */
+ state.ds.lookahead -= state.ds.prev_length-1;
+ state.ds.prev_length -= 2;
+ do {
+ if (++state.ds.strstart <= max_insert) {
+ INSERT_STRING(state.ds.strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ }
+ } while (--state.ds.prev_length != 0);
+ state.ds.strstart++;
+ match_available = 0;
+ match_length = MIN_MATCH-1;
+
+ if (flush) FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+
+ } else if (match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ if (ct_tally (state,0, state.ds.window[state.ds.strstart-1])) {
+ FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+ }
+ state.ds.strstart++;
+ state.ds.lookahead--;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ match_available = 1;
+ state.ds.strstart++;
+ state.ds.lookahead--;
+ }
+// Assert(state,strstart <= isize && lookahead <= isize, "a bit too far");
+
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+ }
+ if (match_available) ct_tally (state,0, state.ds.window[state.ds.strstart-1]);
+
+ return FLUSH_BLOCK(state,1); /* eof */
+}
+
+
+
+
+
+
+
+
+
+
+
+
+int putlocal(struct zlist far *z, WRITEFUNC wfunc,void *param)
+{ // Write a local header described by *z to file *f. Return a ZE_ error code.
+ PUTLG(LOCSIG, f);
+ PUTSH(z->ver, f);
+ PUTSH(z->lflg, f);
+ PUTSH(z->how, f);
+ PUTLG(z->tim, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ PUTSH(z->nam, f);
+ PUTSH(z->ext, f);
+ size_t res = (size_t)wfunc(param, z->iname, (unsigned int)z->nam);
+ if (res!=z->nam) return ZE_TEMP;
+ if (z->ext)
+ { res = (size_t)wfunc(param, z->extra, (unsigned int)z->ext);
+ if (res!=z->ext) return ZE_TEMP;
+ }
+ return ZE_OK;
+}
+
+int putextended(struct zlist far *z, WRITEFUNC wfunc, void *param)
+{ // Write an extended local header described by *z to file *f. Returns a ZE_ code
+ PUTLG(EXTLOCSIG, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ return ZE_OK;
+}
+
+int putcentral(struct zlist far *z, WRITEFUNC wfunc, void *param)
+{ // Write a central header entry of *z to file *f. Returns a ZE_ code.
+ PUTLG(CENSIG, f);
+ PUTSH(z->vem, f);
+ PUTSH(z->ver, f);
+ PUTSH(z->flg, f);
+ PUTSH(z->how, f);
+ PUTLG(z->tim, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ PUTSH(z->nam, f);
+ PUTSH(z->cext, f);
+ PUTSH(z->com, f);
+ PUTSH(z->dsk, f);
+ PUTSH(z->att, f);
+ PUTLG(z->atx, f);
+ PUTLG(z->off, f);
+ if ((size_t)wfunc(param, z->iname, (unsigned int)z->nam) != z->nam ||
+ (z->cext && (size_t)wfunc(param, z->cextra, (unsigned int)z->cext) != z->cext) ||
+ (z->com && (size_t)wfunc(param, z->comment, (unsigned int)z->com) != z->com))
+ return ZE_TEMP;
+ return ZE_OK;
+}
+
+
+int putend(int n, ulg s, ulg c, extent m, char *z, WRITEFUNC wfunc, void *param)
+{ // write the end of the central-directory-data to file *f.
+ PUTLG(ENDSIG, f);
+ PUTSH(0, f);
+ PUTSH(0, f);
+ PUTSH(n, f);
+ PUTSH(n, f);
+ PUTLG(s, f);
+ PUTLG(c, f);
+ PUTSH(m, f);
+ // Write the comment, if any
+ if (m && wfunc(param, z, (unsigned int)m) != m) return ZE_TEMP;
+ return ZE_OK;
+}
+
+
+
+
+
+
+const ulg crc_table[256] = {
+ 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+ 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+ 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+ 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+ 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+ 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+ 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+ 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+ 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+ 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+ 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+ 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+ 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+ 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+ 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+ 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+ 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+ 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+ 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+ 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+ 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+ 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+ 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+ 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+ 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+ 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+ 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+ 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+ 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+ 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+ 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+ 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+ 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+ 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+ 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+ 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+ 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+ 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+ 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+ 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+ 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+ 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+ 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+ 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+ 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+ 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+ 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+ 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+ 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+ 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+ 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+ 0x2d02ef8dL
+};
+
+#define CRC32(c, b) (crc_table[((int)(c) ^ (b)) & 0xff] ^ ((c) >> 8))
+#define DO1(buf) crc = CRC32(crc, *buf++)
+#define DO2(buf) DO1(buf); DO1(buf)
+#define DO4(buf) DO2(buf); DO2(buf)
+#define DO8(buf) DO4(buf); DO4(buf)
+
+ulg crc32(ulg crc, const uch *buf, extent len)
+{ if (buf==NULL) return 0L;
+ crc = crc ^ 0xffffffffL;
+ while (len >= 8) {DO8(buf); len -= 8;}
+ if (len) do {DO1(buf);} while (--len);
+ return crc ^ 0xffffffffL; // (instead of ~c for 64-bit machines)
+}
+
+
+
+
+
+
+
+
+bool HasZipSuffix(const char *fn)
+{ const char *ext = fn+strlen(fn);
+ while (ext>fn && *ext!='.') ext--;
+ if (ext==fn && *ext!='.') return false;
+ if (stricmp(ext,".Z")==0) return true;
+ if (stricmp(ext,".zip")==0) return true;
+ if (stricmp(ext,".zoo")==0) return true;
+ if (stricmp(ext,".arc")==0) return true;
+ if (stricmp(ext,".lzh")==0) return true;
+ if (stricmp(ext,".arj")==0) return true;
+ if (stricmp(ext,".gz")==0) return true;
+ if (stricmp(ext,".tgz")==0) return true;
+ return false;
+}
+
+
+__time32_t filetime2timet(const FILETIME ft)
+{ SYSTEMTIME st; FileTimeToSystemTime(&ft,&st);
+ if (st.wYear<1970) {st.wYear=1970; st.wMonth=1; st.wDay=1;}
+ if (st.wYear>=2038) {st.wYear=2037; st.wMonth=12; st.wDay=31;}
+ struct tm tm;
+ tm.tm_sec = st.wSecond;
+ tm.tm_min = st.wMinute;
+ tm.tm_hour = st.wHour;
+ tm.tm_mday = st.wDay;
+ tm.tm_mon = st.wMonth-1;
+ tm.tm_year = st.wYear-1900;
+ tm.tm_isdst = 0;
+ __time32_t t = _mktime32(&tm);
+ return t;
+}
+
+
+ZRESULT GetFileInfo(HANDLE hf, ulg *attr, long *size, iztimes *times, ulg *timestamp)
+{
+ DWORD type=GetFileType(hf);
+ if (type!=FILE_TYPE_DISK)
+ return ZR_NOTINITED;
+ // The handle must be a handle to a file
+ // The date and time is returned in a long with the date most significant to allow
+ // unsigned integer comparison of absolute times. The attributes have two
+ // high bytes unix attr, and two low bytes a mapping of that to DOS attr.
+ //struct stat s; int res=stat(fn,&s); if (res!=0) return false;
+ // translate windows file attributes into zip ones.
+ BY_HANDLE_FILE_INFORMATION bhi;
+ BOOL res=GetFileInformationByHandle(hf,&bhi);
+ if (!res)
+ return ZR_NOFILE;
+
+ // +++1.3
+ /// Convert times from UTC to local time. MSDN says that FILETIME is local
+ /// for FAT file system and UTC for NTFS system, but tests show that both FAT and NTFS
+ /// return UTC time.
+ {
+ // Get time zone difference
+ SYSTEMTIME stUTC, stLocal;
+ GetSystemTime(&stUTC);
+ GetLocalTime(&stLocal); // could be a few milliseconds difference, but should we care?
+ FILETIME ftUTC, ftLocal;
+ SystemTimeToFileTime(&stUTC, &ftUTC);
+ SystemTimeToFileTime(&stLocal, &ftLocal);
+ LONG64 uiUTC, uiLocal;
+ memcpy (&uiUTC, &ftUTC, min(sizeof(LONG64), sizeof(FILETIME))); // use 'min' as safeguard, however both sizes should be the same: 64-bit
+ memcpy (&uiLocal, &ftLocal, min(sizeof(LONG64), sizeof(FILETIME)));
+ LONG64 uiTimeDiff = uiUTC - uiLocal;
+
+ // apply difference
+ FILETIME* pFileTimes[3] = { &bhi.ftLastWriteTime, &bhi.ftLastAccessTime, &bhi.ftCreationTime };
+ for (int i=0; i<3; i++){
+ LONG64 uiUTC_file;
+ memcpy (&uiUTC_file, pFileTimes[i], min(sizeof(LONG64), sizeof(FILETIME)));
+ LONG64 uiLocal_file = uiUTC_file - uiTimeDiff;
+ memcpy (pFileTimes[i], &uiLocal_file, min(sizeof(LONG64), sizeof(FILETIME)));
+ }
+ }
+
+ DWORD fa=bhi.dwFileAttributes;
+ ulg a=0;
+ // Zip uses the lower word for its interpretation of windows stuff
+ if (fa&FILE_ATTRIBUTE_READONLY) a|=0x01;
+ if (fa&FILE_ATTRIBUTE_HIDDEN) a|=0x02;
+ if (fa&FILE_ATTRIBUTE_SYSTEM) a|=0x04;
+ if (fa&FILE_ATTRIBUTE_DIRECTORY)a|=0x10;
+ if (fa&FILE_ATTRIBUTE_ARCHIVE) a|=0x20;
+ // It uses the upper word for standard unix attr, which we must manually construct
+ if (fa&FILE_ATTRIBUTE_DIRECTORY)a|=0x40000000; // directory
+ else a|=0x80000000; // normal file
+ a|=0x01000000; // readable
+ if (fa&FILE_ATTRIBUTE_READONLY) {}
+ else a|=0x00800000; // writeable
+ // now just a small heuristic to check if it's an executable:
+ DWORD red, hsize=GetFileSize(hf,NULL); if (hsize>40)
+ { SetFilePointer(hf,0,NULL,FILE_BEGIN); unsigned short magic; ReadFile(hf,&magic,sizeof(magic),&red,NULL);
+ SetFilePointer(hf,36,NULL,FILE_BEGIN); unsigned long hpos; ReadFile(hf,&hpos,sizeof(hpos),&red,NULL);
+ if (magic==0x54AD && hsize>hpos+4+20+28)
+ { SetFilePointer(hf,hpos,NULL,FILE_BEGIN); unsigned long signature; ReadFile(hf,&signature,sizeof(signature),&red,NULL);
+ if (signature==IMAGE_DOS_SIGNATURE || signature==IMAGE_OS2_SIGNATURE
+ || signature==IMAGE_OS2_SIGNATURE_LE || signature==IMAGE_NT_SIGNATURE)
+ { a |= 0x00400000; // executable
+ }
+ }
+ }
+ //
+ if (attr!=NULL) *attr = a;
+ if (size!=NULL) *size = hsize;
+ if (times!=NULL)
+ { // time_t is 32bit number of seconds elapsed since 0:0:0GMT, Jan1, 1970.
+ // but FILETIME is 64bit number of 100-nanosecs since Jan1, 1601
+ times->atime = filetime2timet(bhi.ftLastAccessTime);
+ times->mtime = filetime2timet(bhi.ftLastWriteTime);
+ times->ctime = filetime2timet(bhi.ftCreationTime);
+ }
+ if (timestamp!=NULL)
+ { WORD dosdate,dostime;
+ FileTimeToDosDateTime(&bhi.ftLastWriteTime,&dosdate,&dostime);
+ *timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ }
+ return ZR_OK;
+}
+
+
+
+
+
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+
+class TZip
+{ public:
+ TZip() : hfout(0),hmapout(0),zfis(0),obuf(0),hfin(0),writ(0),oerr(false),hasputcen(false),ooffset(0) {}
+ ~TZip() {}
+
+ // These variables say about the file we're writing into
+ // We can write to pipe, file-by-handle, file-by-name, memory-to-memmapfile
+ HANDLE hfout; // if valid, we'll write here (for files or pipes)
+ HANDLE hmapout; // otherwise, we'll write here (for memmap)
+ unsigned ooffset; // for hfout, this is where the pointer was initially
+ ZRESULT oerr; // did a write operation give rise to an error?
+ unsigned writ; // how far have we written. This is maintained by Add, not write(), to avoid confusion over seeks
+ bool ocanseek; // can we seek?
+ char *obuf; // this is where we've locked mmap to view.
+ unsigned int opos; // current pos in the mmap
+ unsigned int mapsize; // the size of the map we created
+ bool hasputcen; // have we yet placed the central directory?
+ //
+ TZipFileInfo *zfis; // each file gets added onto this list, for writing the table at the end
+
+ ZRESULT Create(void *z,unsigned int len,DWORD flags);
+ static unsigned sflush(void *param,const char *buf, unsigned *size);
+ static unsigned swrite(void *param,const char *buf, unsigned size);
+ unsigned int write(const char *buf,unsigned int size);
+ bool oseek(unsigned int pos);
+ ZRESULT GetMemory(void **pbuf, unsigned long *plen);
+ ZRESULT Close();
+
+ // some variables to do with the file currently being read:
+ // I haven't done it object-orientedly here, just put them all
+ // together, since OO didn't seem to make the design any clearer.
+ ulg attr; iztimes times; ulg timestamp; // all open_* methods set these
+ bool iseekable; long isize,ired; // size is not set until close() on pips
+ ulg crc; // crc is not set until close(). iwrit is cumulative
+ HANDLE hfin; bool selfclosehf; // for input files and pipes
+ const char *bufin; unsigned int lenin,posin; // for memory
+ // and a variable for what we've done with the input: (i.e. compressed it!)
+ ulg csize; // compressed size, set by the compression routines
+ // and this is used by some of the compression routines
+ char buf[16384];
+
+
+ ZRESULT open_file(const TCHAR *fn);
+ ZRESULT open_handle(HANDLE hf,unsigned int len);
+ ZRESULT open_mem(void *src,unsigned int len);
+ ZRESULT open_dir();
+ static unsigned sread(TState &s,char *buf,unsigned size);
+ unsigned read(char *buf, unsigned size);
+ ZRESULT iclose();
+
+ ZRESULT ideflate(TZipFileInfo *zfi);
+ ZRESULT istore();
+
+ ZRESULT Add(const char *odstzn, void *src,unsigned int len, DWORD flags);
+ ZRESULT AddCentral();
+
+};
+
+ZRESULT TZip::Create(void *z,unsigned int len,DWORD flags)
+{
+ if (hfout!=0 || hmapout!=0 || obuf!=0 || writ!=0 || oerr!=ZR_OK || hasputcen)
+ return ZR_NOTINITED;
+ //
+ if (flags==ZIP_HANDLE)
+ {
+ HANDLE hf = (HANDLE)z;
+ BOOL res = DuplicateHandle(GetCurrentProcess(),hf,GetCurrentProcess(),&hfout,0,FALSE,DUPLICATE_SAME_ACCESS);
+ if (!res)
+ return ZR_NODUPH;
+ // now we have our own hfout, which we must close. And the caller will close hf
+ DWORD type = GetFileType(hfout);
+ ocanseek = (type==FILE_TYPE_DISK);
+ if (type==FILE_TYPE_DISK)
+ ooffset=SetFilePointer(hfout,0,NULL,FILE_CURRENT);
+ else
+ ooffset=0;
+ return ZR_OK;
+ }
+ else if (flags==ZIP_FILENAME)
+ {
+#ifdef _UNICODE
+ const TCHAR *fn = (const TCHAR*)z;
+ hfout = CreateFileW(fn,GENERIC_WRITE,0,NULL,CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL);
+#else
+ const char *fn = (const char*)z;
+ hfout = CreateFileA(fn,GENERIC_WRITE,0,NULL,CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL);
+#endif
+
+ if (hfout==INVALID_HANDLE_VALUE)
+ {
+ hfout=0;
+ return ZR_NOFILE;
+ }
+ ocanseek=true;
+ ooffset=0;
+ return ZR_OK;
+ }
+ else if (flags==ZIP_MEMORY)
+ {
+ unsigned int size = len;
+ if (size==0)
+ return ZR_MEMSIZE;
+ if (z!=0)
+ obuf=(char*)z;
+ else
+ {
+ hmapout = CreateFileMapping(INVALID_HANDLE_VALUE,NULL,PAGE_READWRITE,0,size,NULL);
+ if (hmapout==NULL)
+ return ZR_NOALLOC;
+ obuf = (char*)MapViewOfFile(hmapout,FILE_MAP_ALL_ACCESS,0,0,size);
+ if (obuf==0)
+ {
+ CloseHandle(hmapout);
+ hmapout=0;
+ return ZR_NOALLOC;
+ }
+ }
+ ocanseek=true;
+ opos=0;
+ mapsize=size;
+ return ZR_OK;
+ }
+ else
+ return ZR_ARGS;
+}
+
+
+unsigned TZip::sflush(void *param,const char *buf, unsigned *size)
+{ // static
+ if (*size==0) return 0;
+ TZip *zip = (TZip*)param;
+ unsigned int writ = zip->write(buf,*size);
+ if (writ!=0) *size=0;
+ return writ;
+}
+unsigned TZip::swrite(void *param,const char *buf, unsigned size)
+{ // static
+ if (size==0) return 0;
+ TZip *zip=(TZip*)param; return zip->write(buf,size);
+}
+
+#if 0 // -----------------------------------------------------------
+unsigned int TZip::write(const char *buf,unsigned int size)
+{ if (obuf!=0)
+ { if (opos+size>=mapsize) {oerr=ZR_MEMSIZE; return 0;}
+ memcpy(obuf+opos, buf, size);
+ opos+=size;
+ return size;
+ }
+ else if (hfout!=0)
+ { DWORD writ; WriteFile(hfout,buf,size,&writ,NULL);
+ return writ;
+ }
+ oerr=ZR_NOTINITED; return 0;
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+unsigned int TZip::write(const char *buf, unsigned int size)
+{
+ if (obuf != 0)
+ {
+ if (opos+size >= mapsize)
+ {
+ int newmapsize = 2*mapsize>opos+size?2*mapsize:opos+size;
+ HANDLE hmapout2 = CreateFileMapping(INVALID_HANDLE_VALUE,NULL,PAGE_READWRITE,0,newmapsize,NULL);
+ if (hmapout2 == NULL)
+ return ZR_NOALLOC;
+ char *obuf2 = NULL; // this is where we've locked mmap to view.
+
+ obuf2 = (char*)MapViewOfFile(hmapout2,FILE_MAP_ALL_ACCESS,0,0,newmapsize);
+ if (obuf2 == 0)
+ {
+ CloseHandle(hmapout2);
+ hmapout2 = 0;
+ return ZR_NOALLOC;
+ }
+
+ memcpy(obuf2, obuf, mapsize);
+
+ UnmapViewOfFile(obuf);
+ CloseHandle(hmapout);
+
+ mapsize = newmapsize;
+ obuf = obuf2;
+ hmapout = hmapout2;
+ }
+ memcpy(obuf+opos, buf, size);
+ opos += size;
+ return size;
+ }
+ else if (hfout!=0)
+ {
+ DWORD writ = 0;
+ WriteFile(hfout,buf,size,&writ,NULL);
+ return writ;
+ }
+ oerr = ZR_NOTINITED;
+ return 0;
+}
+
+
+bool TZip::oseek(unsigned int pos)
+{ if (!ocanseek) {oerr=ZR_SEEK; return false;}
+ if (obuf!=0)
+ { if (pos>=mapsize) {oerr=ZR_MEMSIZE; return false;}
+ opos=pos;
+ return true;
+ }
+ else if (hfout!=0)
+ { SetFilePointer(hfout,pos+ooffset,NULL,FILE_BEGIN);
+ return true;
+ }
+ oerr=ZR_NOTINITED; return 0;
+}
+
+ZRESULT TZip::GetMemory(void **pbuf, unsigned long *plen)
+{ // When the user calls GetMemory, they're presumably at the end
+ // of all their adding. In any case, we have to add the central
+ // directory now, otherwise the memory we tell them won't be complete.
+ if (!hasputcen) AddCentral(); hasputcen=true;
+ if (pbuf!=NULL) *pbuf=(void*)obuf;
+ if (plen!=NULL) *plen=writ;
+ if (obuf==NULL) return ZR_NOTMMAP;
+ return ZR_OK;
+}
+
+ZRESULT TZip::Close()
+{ // if the directory hadn't already been added through a call to GetMemory,
+ // then we do it now
+ ZRESULT res=ZR_OK; if (!hasputcen) res=AddCentral(); hasputcen=true;
+ if (obuf!=0 && hmapout!=0) UnmapViewOfFile(obuf); obuf=0;
+ if (hmapout!=0) CloseHandle(hmapout); hmapout=0;
+ if (hfout!=0) CloseHandle(hfout); hfout=0;
+ return res;
+}
+
+
+
+
+ZRESULT TZip::open_file(const TCHAR *fn)
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ if (fn==0) return ZR_ARGS;
+ HANDLE hf = CreateFile(fn,GENERIC_READ,FILE_SHARE_READ,NULL,OPEN_EXISTING,0,NULL);
+ if (hf==INVALID_HANDLE_VALUE) return ZR_NOFILE;
+ ZRESULT res = open_handle(hf,0);
+ if (res!=ZR_OK) {CloseHandle(hf); return res;}
+ selfclosehf=true;
+ return ZR_OK;
+}
+ZRESULT TZip::open_handle(HANDLE hf,unsigned int len)
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ if (hf==0 || hf==INVALID_HANDLE_VALUE) return ZR_ARGS;
+ DWORD type = GetFileType(hf);
+ if (type==FILE_TYPE_DISK)
+ { ZRESULT res = GetFileInfo(hf,&attr,&isize,&times,&timestamp);
+ if (res!=ZR_OK) return res;
+ SetFilePointer(hf,0,NULL,FILE_BEGIN); // because GetFileInfo will have screwed it up
+ iseekable=true; hfin=hf;
+ return ZR_OK;
+ }
+ else
+ { attr= 0x80000000; // just a normal file
+ isize = -1; // can't know size until at the end
+ if (len!=0) isize=len; // unless we were told explicitly!
+ iseekable=false;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ hfin=hf;
+ return ZR_OK;
+ }
+}
+ZRESULT TZip::open_mem(void *src,unsigned int len)
+{ hfin=0; bufin=(const char*)src; selfclosehf=false; crc=CRCVAL_INITIAL; ired=0; csize=0; ired=0;
+ lenin=len; posin=0;
+ if (src==0 || len==0) return ZR_ARGS;
+ attr= 0x80000000; // just a normal file
+ isize = len;
+ iseekable=true;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ return ZR_OK;
+}
+ZRESULT TZip::open_dir()
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ attr= 0x41C00010; // a readable writable directory, and again directory
+ isize = 0;
+ iseekable=false;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ return ZR_OK;
+}
+
+unsigned TZip::sread(TState &s,char *buf,unsigned size)
+{ // static
+ TZip *zip = (TZip*)s.param;
+ return zip->read(buf,size);
+}
+
+unsigned TZip::read(char *buf, unsigned size)
+{ if (bufin!=0)
+ { if (posin>=lenin) return 0; // end of input
+ ulg red = lenin-posin;
+ if (red>size) red=size;
+ memcpy(buf, bufin+posin, red);
+ posin += red;
+ ired += red;
+ crc = crc32(crc, (uch*)buf, red);
+ return red;
+ }
+ else if (hfin!=0)
+ { DWORD red;
+ BOOL ok = ReadFile(hfin,buf,size,&red,NULL);
+ if (!ok) return 0;
+ ired += red;
+ crc = crc32(crc, (uch*)buf, red);
+ return red;
+ }
+ else {oerr=ZR_NOTINITED; return 0;}
+}
+
+ZRESULT TZip::iclose()
+{ if (selfclosehf && hfin!=0) CloseHandle(hfin); hfin=0;
+ bool mismatch = (isize!=-1 && isize!=ired);
+ isize=ired; // and crc has been being updated anyway
+ if (mismatch) return ZR_MISSIZE;
+ else return ZR_OK;
+}
+
+
+
+#if 0 // -----------------------------------------------------------
+ZRESULT TZip::ideflate(TZipFileInfo *zfi)
+{ TState state;
+ state.readfunc=sread; state.flush_outbuf=sflush;
+ state.param=this; state.level=8; state.seekable=iseekable; state.err=NULL;
+ // the following line will make ct_init realise it has to perform the init
+ state.ts.static_dtree[0].dl.len = 0;
+ // It would be nicer if I could figure out precisely which data had to
+ // be initted each time, and which didn't, but that's kind of difficult.
+ // Maybe for the next version...
+ //
+ bi_init(state,buf, sizeof(buf), TRUE); // it used to be just 1024-size, not 16384 as here
+ ct_init(state,&zfi->att);
+ lm_init(state,state.level, &zfi->flg);
+ ulg sz = deflate(state);
+ csize=sz;
+ if (state.err!=NULL) return ZR_FLATE;
+ else return ZR_OK;
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+// create state object on heap
+ZRESULT TZip::ideflate(TZipFileInfo *zfi)
+{
+ ZRESULT zr = ZR_OK;
+ TState* state=new TState();
+ (*state).readfunc=sread; (*state).flush_outbuf=sflush;
+ (*state).param=this; (*state).level=8; (*state).seekable=iseekable; (*state).err=NULL;
+ // the following line will make ct_init realise it has to perform the init
+ (*state).ts.static_dtree[0].dl.len = 0;
+ // It would be nicer if I could figure out precisely which data had to
+ // be initted each time, and which didn't, but that's kind of difficult.
+ // Maybe for the next version...
+ //
+ bi_init(*state,buf, sizeof(buf), TRUE); // it used to be just 1024-size, not 16384 as here
+ ct_init(*state,&zfi->att);
+ lm_init(*state,(*state).level, &zfi->flg);
+ ulg sz = deflate(*state);
+ csize=sz;
+ if ((*state).err!=NULL)
+ {
+ zr = ZR_FLATE;
+ }
+ delete state;
+ return zr;
+}
+
+ZRESULT TZip::istore()
+{ ulg size=0;
+ for (;;)
+ { unsigned int cin=read(buf,16384); if (cin<=0 || cin==(unsigned int)EOF) break;
+ unsigned int cout = write(buf,cin); if (cout!=cin) return ZR_MISSIZE;
+ size += cin;
+ }
+ csize=size;
+ return ZR_OK;
+}
+
+
+
+
+ZRESULT TZip::Add(const char *odstzn, void *src,unsigned int len, DWORD flags)
+{
+ if (oerr)
+ return ZR_FAILED;
+ if (hasputcen)
+ return ZR_ENDED;
+
+ // zip has its own notion of what its names should look like: i.e. dir/file.stuff
+ char dstzn[MAX_PATH];
+ strcpy(dstzn, odstzn);
+ if (*dstzn == 0)
+ return ZR_ARGS;
+ char *d=dstzn;
+ while (*d != 0)
+ {
+ if (*d == '\\')
+ *d = '/'; d++;
+ }
+ bool isdir = (flags==ZIP_FOLDER);
+ bool needs_trailing_slash = (isdir && dstzn[strlen(dstzn)-1]!='/');
+ int method=DEFLATE;
+ if (isdir || HasZipSuffix(dstzn))
+ method=STORE;
+
+ // now open whatever was our input source:
+ ZRESULT openres;
+ if (flags==ZIP_FILENAME)
+ openres=open_file((const TCHAR*)src);
+ else if (flags==ZIP_HANDLE)
+ openres=open_handle((HANDLE)src,len);
+ else if (flags==ZIP_MEMORY)
+ openres=open_mem(src,len);
+ else if (flags==ZIP_FOLDER)
+ openres=open_dir();
+ else return ZR_ARGS;
+ if (openres!=ZR_OK)
+ return openres;
+
+ // A zip "entry" consists of a local header (which includes the file name),
+ // then the compressed data, and possibly an extended local header.
+
+ // Initialize the local header
+ TZipFileInfo zfi; zfi.nxt=NULL;
+ strcpy(zfi.name,"");
+ strcpy(zfi.iname,dstzn);
+ zfi.nam=strlen(zfi.iname);
+ if (needs_trailing_slash)
+ {
+ strcat(zfi.iname,"/");
+ zfi.nam++;
+ }
+ strcpy(zfi.zname,"");
+ zfi.extra=NULL; zfi.ext=0; // extra header to go after this compressed data, and its length
+ zfi.cextra=NULL; zfi.cext=0; // extra header to go in the central end-of-zip directory, and its length
+ zfi.comment=NULL; zfi.com=0; // comment, and its length
+ zfi.mark = 1;
+ zfi.dosflag = 0;
+ zfi.att = (ush)BINARY;
+ zfi.vem = (ush)0xB17; // 0xB00 is win32 os-code. 0x17 is 23 in decimal: zip 2.3
+ zfi.ver = (ush)20; // Needs PKUNZIP 2.0 to unzip it
+ zfi.tim = timestamp;
+ // Even though we write the header now, it will have to be rewritten, since we don't know compressed size or crc.
+ zfi.crc = 0; // to be updated later
+ zfi.flg = 8; // 8 means 'there is an extra header'. Assume for the moment that we need it.
+ zfi.lflg = zfi.flg; // to be updated later
+ zfi.how = (ush)method; // to be updated later
+ zfi.siz = (ulg)(method==STORE && isize>=0 ? isize : 0); // to be updated later
+ zfi.len = (ulg)(isize); // to be updated later
+ zfi.dsk = 0;
+ zfi.atx = attr;
+ zfi.off = writ+ooffset; // offset within file of the start of this local record
+ // stuff the 'times' structure into zfi.extra
+ char xloc[EB_L_UT_SIZE];
+ zfi.extra=xloc;
+ zfi.ext=EB_L_UT_SIZE;
+ char xcen[EB_C_UT_SIZE];
+ zfi.cextra=xcen;
+ zfi.cext=EB_C_UT_SIZE;
+ xloc[0] = 'U';
+ xloc[1] = 'T';
+ xloc[2] = EB_UT_LEN(3); // length of data part of e.f.
+ xloc[3] = 0;
+ xloc[4] = EB_UT_FL_MTIME | EB_UT_FL_ATIME | EB_UT_FL_CTIME;
+ xloc[5] = (char)(times.mtime);
+ xloc[6] = (char)(times.mtime >> 8);
+ xloc[7] = (char)(times.mtime >> 16);
+ xloc[8] = (char)(times.mtime >> 24);
+ xloc[9] = (char)(times.atime);
+ xloc[10] = (char)(times.atime >> 8);
+ xloc[11] = (char)(times.atime >> 16);
+ xloc[12] = (char)(times.atime >> 24);
+ xloc[13] = (char)(times.ctime);
+ xloc[14] = (char)(times.ctime >> 8);
+ xloc[15] = (char)(times.ctime >> 16);
+ xloc[16] = (char)(times.ctime >> 24);
+ memcpy(zfi.cextra,zfi.extra,EB_C_UT_SIZE);
+ zfi.cextra[EB_LEN] = EB_UT_LEN(1);
+
+
+ // (1) Start by writing the local header:
+ int r = putlocal(&zfi,swrite,this);
+ if (r!=ZE_OK)
+ {
+ iclose();
+ return ZR_WRITE;
+ }
+ writ += 4 + LOCHEAD + (unsigned int)zfi.nam + (unsigned int)zfi.ext;
+ if (oerr!=ZR_OK)
+ {
+ iclose();
+ return oerr;
+ }
+
+ //(2) Write deflated/stored file to zip file
+ ZRESULT writeres=ZR_OK;
+ if (!isdir && method==DEFLATE)
+ writeres=ideflate(&zfi);
+ else if (!isdir && method==STORE)
+ writeres=istore();
+ else if (isdir)
+ csize=0;
+ iclose();
+ writ += csize;
+ if (oerr!=ZR_OK)
+ return oerr;
+ if (writeres!=ZR_OK)
+ return ZR_WRITE;
+
+ // (3) Either rewrite the local header with correct information...
+ bool first_header_has_size_right = (zfi.siz==csize);
+ zfi.crc = crc;
+ zfi.siz = csize;
+ zfi.len = isize;
+ if (ocanseek)
+ {
+ zfi.how = (ush)method;
+ if ((zfi.flg & 1) == 0)
+ zfi.flg &= ~8; // clear the extended local header flag
+ zfi.lflg = zfi.flg;
+ // rewrite the local header:
+ if (!oseek(zfi.off-ooffset))
+ return ZR_SEEK;
+ if ((r = putlocal(&zfi, swrite,this)) != ZE_OK)
+ return ZR_WRITE;
+ if (!oseek(writ))
+ return ZR_SEEK;
+ }
+ else
+ {
+ // (4) ... or put an updated header at the end
+ if (zfi.how != (ush) method)
+ return ZR_NOCHANGE;
+ if (method==STORE && !first_header_has_size_right)
+ return ZR_NOCHANGE;
+ if ((r = putextended(&zfi, swrite,this)) != ZE_OK)
+ return ZR_WRITE;
+ writ += 16L;
+ zfi.flg = zfi.lflg; // if flg modified by inflate, for the central index
+ }
+ if (oerr!=ZR_OK)
+ return oerr;
+
+ // Keep a copy of the zipfileinfo, for our end-of-zip directory
+ char *cextra = new char[zfi.cext];
+ memcpy(cextra,zfi.cextra,zfi.cext); zfi.cextra=cextra;
+ TZipFileInfo *pzfi = new TZipFileInfo;
+ memcpy(pzfi,&zfi,sizeof(zfi));
+ if (zfis==NULL)
+ zfis=pzfi;
+ else
+ {
+ TZipFileInfo *z=zfis;
+ while (z->nxt!=NULL)
+ z=z->nxt;
+ z->nxt=pzfi;
+ }
+ return ZR_OK;
+}
+
+ZRESULT TZip::AddCentral()
+{ // write central directory
+ int numentries = 0;
+ ulg pos_at_start_of_central = writ;
+ //ulg tot_unc_size=0, tot_compressed_size=0;
+ bool okay=true;
+ for (TZipFileInfo *zfi=zfis; zfi!=NULL; )
+ { if (okay)
+ { int res = putcentral(zfi, swrite,this);
+ if (res!=ZE_OK) okay=false;
+ }
+ writ += 4 + CENHEAD + (unsigned int)zfi->nam + (unsigned int)zfi->cext + (unsigned int)zfi->com;
+ //tot_unc_size += zfi->len;
+ //tot_compressed_size += zfi->siz;
+ numentries++;
+ //
+ TZipFileInfo *zfinext = zfi->nxt;
+ if (zfi->cextra!=0) delete[] zfi->cextra;
+ delete zfi;
+ zfi = zfinext;
+ }
+ ulg center_size = writ - pos_at_start_of_central;
+ if (okay)
+ { int res = putend(numentries, center_size, pos_at_start_of_central+ooffset, 0, NULL, swrite,this);
+ if (res!=ZE_OK) okay=false;
+ writ += 4 + ENDHEAD + 0;
+ }
+ if (!okay) return ZR_WRITE;
+ return ZR_OK;
+}
+
+
+
+
+
+ZRESULT lasterrorZ=ZR_OK;
+
+unsigned int FormatZipMessageZ(ZRESULT code, char *buf,unsigned int len)
+{ if (code==ZR_RECENT) code=lasterrorZ;
+ const char *msg="unknown zip result code";
+ switch (code)
+ { case ZR_OK: msg="Success"; break;
+ case ZR_NODUPH: msg="Culdn't duplicate handle"; break;
+ case ZR_NOFILE: msg="Couldn't create/open file"; break;
+ case ZR_NOALLOC: msg="Failed to allocate memory"; break;
+ case ZR_WRITE: msg="Error writing to file"; break;
+ case ZR_NOTFOUND: msg="File not found in the zipfile"; break;
+ case ZR_MORE: msg="Still more data to unzip"; break;
+ case ZR_CORRUPT: msg="Zipfile is corrupt or not a zipfile"; break;
+ case ZR_READ: msg="Error reading file"; break;
+ case ZR_ARGS: msg="Caller: faulty arguments"; break;
+ case ZR_PARTIALUNZ: msg="Caller: the file had already been partially unzipped"; break;
+ case ZR_NOTMMAP: msg="Caller: can only get memory of a memory zipfile"; break;
+ case ZR_MEMSIZE: msg="Caller: not enough space allocated for memory zipfile"; break;
+ case ZR_FAILED: msg="Caller: there was a previous error"; break;
+ case ZR_ENDED: msg="Caller: additions to the zip have already been ended"; break;
+ case ZR_ZMODE: msg="Caller: mixing creation and opening of zip"; break;
+ case ZR_NOTINITED: msg="Zip-bug: internal initialisation not completed"; break;
+ case ZR_SEEK: msg="Zip-bug: trying to seek the unseekable"; break;
+ case ZR_MISSIZE: msg="Zip-bug: the anticipated size turned out wrong"; break;
+ case ZR_NOCHANGE: msg="Zip-bug: tried to change mind, but not allowed"; break;
+ case ZR_FLATE: msg="Zip-bug: an internal error during flation"; break;
+ }
+ unsigned int mlen=(unsigned int)strlen(msg);
+ if (buf==0 || len==0) return mlen;
+ unsigned int n=mlen; if (n+1>len) n=len-1;
+ strncpy(buf,msg,n); buf[n]=0;
+ return mlen;
+}
+
+
+
+typedef struct
+{ DWORD flag;
+ TZip *zip;
+} TZipHandleData;
+
+
+HZIP CreateZipZ(void *z,unsigned int len,DWORD flags)
+{
+ tzset();
+ TZip *zip = new TZip();
+ lasterrorZ = zip->Create(z,len,flags);
+ if (lasterrorZ != ZR_OK)
+ {
+ delete zip;
+ return 0;
+ }
+ TZipHandleData *han = new TZipHandleData;
+ han->flag = 2;
+ han->zip = zip;
+ return (HZIP)han;
+}
+
+ZRESULT ZipAdd(HZIP hz, const TCHAR *dstzn, void *src, unsigned int len, DWORD flags)
+{
+ if (hz == 0)
+ {
+ lasterrorZ = ZR_ARGS;
+ return ZR_ARGS;
+ }
+
+ if (dstzn == NULL)
+ {
+ lasterrorZ = ZR_ARGS;
+ return ZR_ARGS;
+ }
+
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag != 2)
+ {
+ lasterrorZ = ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TZip *zip = han->zip;
+
+
+ char szDest[MAX_PATH*2];
+ memset(szDest, 0, sizeof(szDest));
+
+#ifdef _UNICODE
+ // need to convert Unicode dest to ANSI
+ int nActualChars = WideCharToMultiByte(CP_ACP, // code page
+ 0, // performance and mapping flags
+ (LPCWSTR) dstzn, // wide-character string
+ -1, // number of chars in string
+ szDest, // buffer for new string
+ MAX_PATH*2, // size of buffer
+ NULL, // default for unmappable chars
+ NULL); // set when default char used
+ if (nActualChars == 0)
+ return ZR_ARGS;
+#else
+ strcpy(szDest, dstzn);
+#endif
+
+ lasterrorZ = zip->Add(szDest, src, len, flags);
+
+ return lasterrorZ;
+}
+
+ZRESULT ZipGetMemory(HZIP hz, void **buf, unsigned long *len)
+{ if (hz==0) {if (buf!=0) *buf=0; if (len!=0) *len=0; lasterrorZ=ZR_ARGS;return ZR_ARGS;}
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag!=2) {lasterrorZ=ZR_ZMODE;return ZR_ZMODE;}
+ TZip *zip = han->zip;
+ lasterrorZ = zip->GetMemory(buf,len);
+ return lasterrorZ;
+}
+
+ZRESULT CloseZipZ(HZIP hz)
+{ if (hz==0) {lasterrorZ=ZR_ARGS;return ZR_ARGS;}
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag!=2) {lasterrorZ=ZR_ZMODE;return ZR_ZMODE;}
+ TZip *zip = han->zip;
+ lasterrorZ = zip->Close();
+ delete zip;
+ delete han;
+ return lasterrorZ;
+}
+
+bool IsZipHandleZ(HZIP hz)
+{ if (hz==0) return true;
+ TZipHandleData *han = (TZipHandleData*)hz;
+ return (han->flag==2);
+}
+
+//+++1.2
+/**
+* Added by Renaud Deysine. This fonctionnality was missing in API
+* @brief Add a folder to the zip file. Empty folders will also be added.
+* This method add recursively the content of a directory
+* @param AbsolutePath like "C:\\Windows" or "C:\\Windows\"
+* @param DirToAdd like "System32"
+*
+*/
+BOOL AddFolderContent(HZIP hZip, TCHAR* AbsolutePath, TCHAR* DirToAdd)
+{
+ HANDLE hFind; // file handle
+ WIN32_FIND_DATA FindFileData;
+ TCHAR PathToSearchInto [MAX_PATH] = {0};
+
+ if (NULL != DirToAdd)
+ {
+ ZipAdd(hZip, DirToAdd, 0, 0, ZIP_FOLDER);
+ }
+
+ // Construct the path to search into "C:\\Windows\\System32\\*"
+ _tcscpy(PathToSearchInto, AbsolutePath);
+ _tcscat(PathToSearchInto, _T("\\"));
+ _tcscat(PathToSearchInto, DirToAdd);
+ _tcscat(PathToSearchInto, _T("\\*"));
+
+ hFind = FindFirstFile(PathToSearchInto,&FindFileData); // find the first file
+ if(hFind == INVALID_HANDLE_VALUE)
+ {
+ return FALSE;
+ }
+
+ bool bSearch = true;
+ while(bSearch) // until we finds an entry
+ {
+ if(FindNextFile(hFind,&FindFileData))
+ {
+ // Don't care about . and ..
+ //if(IsDots(FindFileData.cFileName))
+ if ((_tcscmp(FindFileData.cFileName, _T(".")) == 0) ||
+ (_tcscmp(FindFileData.cFileName, _T("..")) == 0))
+ continue;
+
+ // We have found a directory
+ if((FindFileData.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY))
+ {
+ TCHAR RelativePathNewDirFound[MAX_PATH] = {0};
+ _tcscat(RelativePathNewDirFound, DirToAdd);
+ _tcscat(RelativePathNewDirFound, _T("\\"));
+ _tcscat(RelativePathNewDirFound, FindFileData.cFileName);
+
+ // Recursive call with the new directory found
+ if (AddFolderContent(hZip, AbsolutePath, RelativePathNewDirFound)== FALSE)
+ {
+ return FALSE ;
+ }
+
+ }
+ // We have found a file
+ else
+ {
+ // Add the found file to the zip file
+ TCHAR RelativePathNewFileFound[MAX_PATH] = {0};
+ _tcscpy(RelativePathNewFileFound, DirToAdd);
+ _tcscat(RelativePathNewFileFound, _T("\\"));
+ _tcscat(RelativePathNewFileFound, FindFileData.cFileName);
+
+ TCHAR AbsoluteSourceFile[MAX_PATH] = { 0 };
+ _tcscpy(AbsoluteSourceFile, AbsolutePath);
+ _tcscat(AbsoluteSourceFile, RelativePathNewFileFound);
+
+ if (ZipAdd(hZip, RelativePathNewFileFound, AbsoluteSourceFile, 0, ZIP_FILENAME) != ZR_OK)
+ {
+ return FALSE;
+ }
+ }
+
+ }//FindNextFile
+ else
+ {
+ if(GetLastError() == ERROR_NO_MORE_FILES) // no more files there
+ bSearch = false;
+ else {
+ // some error occured, close the handle and return FALSE
+ FindClose(hFind);
+ return FALSE;
+ }
+ }
+ }//while
+
+ FindClose(hFind); // closing file handle
+ return true;
+
+}
+