VeraCrypt
aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/Common/XUnzip.cpp4379
-rw-r--r--src/Common/XUnzip.h382
-rw-r--r--src/Common/XZip.cpp3209
-rw-r--r--src/Common/XZip.h323
-rw-r--r--src/ExpandVolume/ExpandVolume.vcxproj4
-rw-r--r--src/ExpandVolume/ExpandVolume.vcxproj.filters12
-rw-r--r--src/Format/Format.vcxproj4
-rw-r--r--src/Format/Format.vcxproj.filters12
-rw-r--r--src/Mount/Mount.vcxproj4
-rw-r--r--src/Mount/Mount.vcxproj.filters12
-rw-r--r--src/Setup/Setup.vcxproj4
-rw-r--r--src/Setup/Setup.vcxproj.filters12
12 files changed, 8357 insertions, 0 deletions
diff --git a/src/Common/XUnzip.cpp b/src/Common/XUnzip.cpp
new file mode 100644
index 00000000..5d522870
--- /dev/null
+++ b/src/Common/XUnzip.cpp
@@ -0,0 +1,4379 @@
+// XUnzip.cpp Version 1.3
+//
+// Authors: Mark Adler et al. (see below)
+//
+// Modified by: Lucian Wischik
+// lu@wischik.com
+//
+// Version 1.0 - Turned C files into just a single CPP file
+// - Made them compile cleanly as C++ files
+// - Gave them simpler APIs
+// - Added the ability to zip/unzip directly in memory without
+// any intermediate files
+//
+// Modified by: Hans Dietrich
+// hdietrich@gmail.com
+//
+// Version 1.3: - Corrected size bug introduced by 1.2
+//
+// Version 1.2: - Many bug fixes. See CodeProject article for list.
+//
+// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()
+// - Changed file names to avoid conflicts with Lucian's files
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Lucian Wischik's comments:
+// --------------------------
+// THIS FILE is almost entirely based upon code by Info-ZIP.
+// It has been modified by Lucian Wischik.
+// The original code may be found at http://www.info-zip.org
+// The original copyright text follows.
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Original authors' comments:
+// ---------------------------
+// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
+// definitive version of this document should be available at
+// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
+//
+// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
+//
+// For the purposes of this copyright and license, "Info-ZIP" is defined as
+// the following set of individuals:
+//
+// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
+// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
+// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
+// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
+// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
+// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
+// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
+//
+// This software is provided "as is", without warranty of any kind, express
+// or implied. In no event shall Info-ZIP or its contributors be held liable
+// for any direct, indirect, incidental, special or consequential damages
+// arising out of the use of or inability to use this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// definition, disclaimer, and this list of conditions.
+//
+// 2. Redistributions in binary form (compiled executables) must reproduce
+// the above copyright notice, definition, disclaimer, and this list of
+// conditions in documentation and/or other materials provided with the
+// distribution. The sole exception to this condition is redistribution
+// of a standard UnZipSFX binary as part of a self-extracting archive;
+// that is permitted without inclusion of this license, as long as the
+// normal UnZipSFX banner has not been removed from the binary or disabled.
+//
+// 3. Altered versions--including, but not limited to, ports to new
+// operating systems, existing ports with new graphical interfaces, and
+// dynamic, shared, or static library versions--must be plainly marked
+// as such and must not be misrepresented as being the original source.
+// Such altered versions also must not be misrepresented as being
+// Info-ZIP releases--including, but not limited to, labeling of the
+// altered versions with the names "Info-ZIP" (or any variation thereof,
+// including, but not limited to, different capitalizations),
+// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
+// Info-ZIP. Such altered versions are further prohibited from
+// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
+// of the Info-ZIP URL(s).
+//
+// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
+// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
+// own source and binary releases.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+
+#define _USE_32BIT_TIME_T //+++1.2
+
+
+#define STRICT
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+#include <time.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <tchar.h>
+#include "XUnzip.h"
+
+#pragma warning(disable : 4996) // disable bogus deprecation warning
+
+// THIS FILE is almost entirely based upon code by Jean-loup Gailly
+// and Mark Adler. It has been modified by Lucian Wischik.
+// The original code may be found at http://www.gzip.org/zlib/
+// The original copyright text follows.
+//
+//
+//
+// zlib.h -- interface of the 'zlib' general purpose compression library
+// version 1.1.3, July 9th, 1998
+//
+// Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+// claim that you wrote the original software. If you use this software
+// in a product, an acknowledgment in the product documentation would be
+// appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+// misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+//
+// Jean-loup Gailly Mark Adler
+// jloup@gzip.org madler@alumni.caltech.edu
+//
+//
+// The data format used by the zlib library is described by RFCs (Request for
+// Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+// (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+//
+//
+// The 'zlib' compression library provides in-memory compression and
+// decompression functions, including integrity checks of the uncompressed
+// data. This version of the library supports only one compression method
+// (deflation) but other algorithms will be added later and will have the same
+// stream interface.
+//
+// Compression can be done in a single step if the buffers are large
+// enough (for example if an input file is mmap'ed), or can be done by
+// repeated calls of the compression function. In the latter case, the
+// application must provide more input and/or consume the output
+// (providing more output space) before each call.
+//
+// The library also supports reading and writing files in gzip (.gz) format
+// with an interface similar to that of stdio.
+//
+// The library does not install any signal handler. The decoder checks
+// the consistency of the compressed data, so the library should never
+// crash even in case of corrupted input.
+//
+// for more info about .ZIP format, see ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+// PkWare has also a specification at ftp://ftp.pkware.com/probdesc.zip
+
+#define zmalloc(len) malloc(len)
+
+#define zfree(p) free(p)
+
+/*
+void *zmalloc(unsigned int len)
+{ char *buf = new char[len+32];
+ for (int i=0; i<16; i++)
+ { buf[i]=i;
+ buf[len+31-i]=i;
+ }
+ *((unsigned int*)buf) = len;
+ char c[1000]; wsprintf(c,"malloc 0x%lx - %lu",buf+16,len);
+ OutputDebugString(c);
+ return buf+16;
+}
+
+void zfree(void *buf)
+{ char c[1000]; wsprintf(c,"free 0x%lx",buf);
+ OutputDebugString(c);
+ char *p = ((char*)buf)-16;
+ unsigned int len = *((unsigned int*)p);
+ bool blown=false;
+ for (int i=0; i<16; i++)
+ { char lo = p[i];
+ char hi = p[len+31-i];
+ if (hi!=i || (lo!=i && i>4)) blown=true;
+ }
+ if (blown)
+ { OutputDebugString("BLOWN!!!");
+ }
+ delete[] p;
+}
+*/
+
+#pragma warning(disable : 4702) // unreachable code
+
+static ZRESULT zopenerror = ZR_OK; //+++1.2
+
+typedef struct tm_unz_s
+{ unsigned int tm_sec; // seconds after the minute - [0,59]
+ unsigned int tm_min; // minutes after the hour - [0,59]
+ unsigned int tm_hour; // hours since midnight - [0,23]
+ unsigned int tm_mday; // day of the month - [1,31]
+ unsigned int tm_mon; // months since January - [0,11]
+ unsigned int tm_year; // years - [1980..2044]
+} tm_unz;
+
+
+// unz_global_info structure contain global data about the ZIPfile
+typedef struct unz_global_info_s
+{ unsigned long number_entry; // total number of entries in the central dir on this disk
+ unsigned long size_comment; // size of the global comment of the zipfile
+} unz_global_info;
+
+// unz_file_info contain information about a file in the zipfile
+typedef struct unz_file_info_s
+{ unsigned long version; // version made by 2 bytes
+ unsigned long version_needed; // version needed to extract 2 bytes
+ unsigned long flag; // general purpose bit flag 2 bytes
+ unsigned long compression_method; // compression method 2 bytes
+ unsigned long dosDate; // last mod file date in Dos fmt 4 bytes
+ unsigned long crc; // crc-32 4 bytes
+ unsigned long compressed_size; // compressed size 4 bytes
+ unsigned long uncompressed_size; // uncompressed size 4 bytes
+ unsigned long size_filename; // filename length 2 bytes
+ unsigned long size_file_extra; // extra field length 2 bytes
+ unsigned long size_file_comment; // file comment length 2 bytes
+ unsigned long disk_num_start; // disk number start 2 bytes
+ unsigned long internal_fa; // internal file attributes 2 bytes
+ unsigned long external_fa; // external file attributes 4 bytes
+ tm_unz tmu_date;
+} unz_file_info;
+
+
+#define UNZ_OK (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO (Z_ERRNO)
+#define UNZ_EOF (0)
+#define UNZ_PARAMERROR (-102)
+#define UNZ_BADZIPFILE (-103)
+#define UNZ_INTERNALERROR (-104)
+#define UNZ_CRCERROR (-105)
+
+
+
+
+
+
+
+#define ZLIB_VERSION "1.1.3"
+
+
+// Allowed flush values; see deflate() for details
+#define Z_NO_FLUSH 0
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+
+
+// compression levels
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+
+// compression strategy; see deflateInit2() for details
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+
+// Possible values of the data_type field
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+
+// The deflate compression method (the only one supported in this version)
+#define Z_DEFLATED 8
+
+// for initializing zalloc, zfree, opaque
+#define Z_NULL 0
+
+// case sensitivity when searching for filenames
+#define CASE_SENSITIVE 1
+#define CASE_INSENSITIVE 2
+
+
+// Return codes for the compression/decompression functions. Negative
+// values are errors, positive values are used for special but normal events.
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+
+
+
+// Basic data types
+typedef unsigned char Byte; // 8 bits
+typedef unsigned int uInt; // 16 bits or more
+typedef unsigned long uLong; // 32 bits or more
+typedef void *voidpf;
+typedef void *voidp;
+typedef long z_off_t;
+
+
+
+
+
+
+
+
+
+
+
+
+typedef voidpf (*alloc_func) (voidpf opaque, uInt items, uInt size);
+typedef void (*free_func) (voidpf opaque, voidpf address);
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Byte *next_in; // next input byte
+ uInt avail_in; // number of bytes available at next_in
+ uLong total_in; // total nb of input bytes read so far
+
+ Byte *next_out; // next output byte should be put there
+ uInt avail_out; // remaining free space at next_out
+ uLong total_out; // total nb of bytes output so far
+
+ char *msg; // last error message, NULL if no error
+ struct internal_state *state; // not visible by applications
+
+ alloc_func zalloc; // used to allocate the internal state
+ free_func zfree; // used to free the internal state
+ voidpf opaque; // private data object passed to zalloc and zfree
+
+ int data_type; // best guess about the data type: ascii or binary
+ uLong adler; // adler32 value of the uncompressed data
+ uLong reserved; // reserved for future use
+} z_stream;
+
+typedef z_stream *z_streamp;
+
+
+// The application must update next_in and avail_in when avail_in has
+// dropped to zero. It must update next_out and avail_out when avail_out
+// has dropped to zero. The application must initialize zalloc, zfree and
+// opaque before calling the init function. All other fields are set by the
+// compression library and must not be updated by the application.
+//
+// The opaque value provided by the application will be passed as the first
+// parameter for calls of zalloc and zfree. This can be useful for custom
+// memory management. The compression library attaches no meaning to the
+// opaque value.
+//
+// zalloc must return Z_NULL if there is not enough memory for the object.
+// If zlib is used in a multi-threaded application, zalloc and zfree must be
+// thread safe.
+//
+// The fields total_in and total_out can be used for statistics or
+// progress reports. After compression, total_in holds the total size of
+// the uncompressed data and may be saved for use in the decompressor
+// (particularly if the decompressor wants to decompress everything in
+// a single step).
+//
+
+
+// basic functions
+
+const char *zlibVersion ();
+// The application can compare zlibVersion and ZLIB_VERSION for consistency.
+// If the first character differs, the library code actually used is
+// not compatible with the zlib.h header file used by the application.
+// This check is automatically made by inflateInit.
+
+
+
+
+
+
+int inflate (z_streamp strm, int flush);
+//
+// inflate decompresses as much data as possible, and stops when the input
+// buffer becomes empty or the output buffer becomes full. It may some
+// introduce some output latency (reading input without producing any output)
+// except when forced to flush.
+//
+// The detailed semantics are as follows. inflate performs one or both of the
+// following actions:
+//
+// - Decompress more input starting at next_in and update next_in and avail_in
+// accordingly. If not all input can be processed (because there is not
+// enough room in the output buffer), next_in is updated and processing
+// will resume at this point for the next call of inflate().
+//
+// - Provide more output starting at next_out and update next_out and avail_out
+// accordingly. inflate() provides as much output as possible, until there
+// is no more input data or no more space in the output buffer (see below
+// about the flush parameter).
+//
+// Before the call of inflate(), the application should ensure that at least
+// one of the actions is possible, by providing more input and/or consuming
+// more output, and updating the next_* and avail_* values accordingly.
+// The application can consume the uncompressed output when it wants, for
+// example when the output buffer is full (avail_out == 0), or after each
+// call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+// must be called again after making room in the output buffer because there
+// might be more output pending.
+//
+// If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+// output as possible to the output buffer. The flushing behavior of inflate is
+// not specified for values of the flush parameter other than Z_SYNC_FLUSH
+// and Z_FINISH, but the current implementation actually flushes as much output
+// as possible anyway.
+//
+// inflate() should normally be called until it returns Z_STREAM_END or an
+// error. However if all decompression is to be performed in a single step
+// (a single call of inflate), the parameter flush should be set to
+// Z_FINISH. In this case all pending input is processed and all pending
+// output is flushed; avail_out must be large enough to hold all the
+// uncompressed data. (The size of the uncompressed data may have been saved
+// by the compressor for this purpose.) The next operation on this stream must
+// be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+// is never required, but can be used to inform inflate that a faster routine
+// may be used for the single inflate() call.
+//
+// If a preset dictionary is needed at this point (see inflateSetDictionary
+// below), inflate sets strm-adler to the adler32 checksum of the
+// dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
+// it sets strm->adler to the adler32 checksum of all output produced
+// so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+// an error code as described below. At the end of the stream, inflate()
+// checks that its computed adler32 checksum is equal to that saved by the
+// compressor and returns Z_STREAM_END only if the checksum is correct.
+//
+// inflate() returns Z_OK if some progress has been made (more input processed
+// or more output produced), Z_STREAM_END if the end of the compressed data has
+// been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+// preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+// corrupted (input stream not conforming to the zlib format or incorrect
+// adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+// (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+// enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+// enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+// case, the application may then call inflateSync to look for a good
+// compression block.
+//
+
+
+int inflateEnd (z_streamp strm);
+//
+// All dynamically allocated data structures for this stream are freed.
+// This function discards any unprocessed input and does not flush any
+// pending output.
+//
+// inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+// was inconsistent. In the error case, msg may be set but then points to a
+// static string (which must not be deallocated).
+
+ // Advanced functions
+
+// The following functions are needed only in some special applications.
+
+
+
+
+
+int inflateSetDictionary (z_streamp strm,
+ const Byte *dictionary,
+ uInt dictLength);
+//
+// Initializes the decompression dictionary from the given uncompressed byte
+// sequence. This function must be called immediately after a call of inflate
+// if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+// can be determined from the Adler32 value returned by this call of
+// inflate. The compressor and decompressor must use exactly the same
+// dictionary.
+//
+// inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+// parameter is invalid (such as NULL dictionary) or the stream state is
+// inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+// expected one (incorrect Adler32 value). inflateSetDictionary does not
+// perform any decompression: this will be done by subsequent calls of
+// inflate().
+
+
+int inflateSync (z_streamp strm);
+//
+// Skips invalid compressed data until a full flush point can be found, or until all
+// available input is skipped. No output is provided.
+//
+// inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+// if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+// or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+// case, the application may save the current current value of total_in which
+// indicates where valid compressed data was found. In the error case, the
+// application may repeatedly call inflateSync, providing more input each time,
+// until success or end of the input data.
+
+
+int inflateReset (z_streamp strm);
+// This function is equivalent to inflateEnd followed by inflateInit,
+// but does not free and reallocate all the internal decompression state.
+// The stream will keep attributes that may have been set by inflateInit2.
+//
+// inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+// stream state was inconsistent (such as zalloc or state being NULL).
+//
+
+
+
+// checksum functions
+// These functions are not related to compression but are exported
+// anyway because they might be useful in applications using the
+// compression library.
+
+uLong adler32 (uLong adler, const Byte *buf, uInt len);
+// Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+// return the updated checksum. If buf is NULL, this function returns
+// the required initial value for the checksum.
+// An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+// much faster. Usage example:
+//
+// uLong adler = adler32(0L, Z_NULL, 0);
+//
+// while (read_buffer(buffer, length) != EOF) {
+// adler = adler32(adler, buffer, length);
+// }
+// if (adler != original_adler) error();
+
+uLong ucrc32 (uLong crc, const Byte *buf, uInt len);
+// Update a running crc with the bytes buf[0..len-1] and return the updated
+// crc. If buf is NULL, this function returns the required initial value
+// for the crc. Pre- and post-conditioning (one's complement) is performed
+// within this function so it shouldn't be done by the application.
+// Usage example:
+//
+// uLong crc = crc32(0L, Z_NULL, 0);
+//
+// while (read_buffer(buffer, length) != EOF) {
+// crc = crc32(crc, buffer, length);
+// }
+// if (crc != original_crc) error();
+
+
+
+
+const char *zError (int err);
+int inflateSyncPoint (z_streamp z);
+const uLong *get_crc_table (void);
+
+
+
+typedef unsigned char uch;
+typedef uch uchf;
+typedef unsigned short ush;
+typedef ush ushf;
+typedef unsigned long ulg;
+
+
+
+const char * const z_errmsg[10] = { // indexed by 2-zlib_error
+"need dictionary", // Z_NEED_DICT 2
+"stream end", // Z_STREAM_END 1
+"", // Z_OK 0
+"file error", // Z_ERRNO (-1)
+"stream error", // Z_STREAM_ERROR (-2)
+"data error", // Z_DATA_ERROR (-3)
+"insufficient memory", // Z_MEM_ERROR (-4)
+"buffer error", // Z_BUF_ERROR (-5)
+"incompatible version",// Z_VERSION_ERROR (-6)
+""};
+
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+ return (strm->msg = (char*)ERR_MSG(err), (err))
+// To be used only when the state is known to be valid
+
+ // common constants
+
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+// The three kinds of block type
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+// The minimum and maximum match lengths
+
+#define PRESET_DICT 0x20 // preset dictionary flag in zlib header
+
+ // target dependencies
+
+#define OS_CODE 0x0b // Window 95 & Windows NT
+
+
+
+ // functions
+
+#define zmemzero(dest, len) memset(dest, 0, len)
+
+// Diagnostic functions
+#undef Assert
+#undef Trace
+#undef Tracev
+#undef Tracevv
+#undef Tracec
+#undef Tracecv
+
+#ifdef DEBUG
+
+ int z_verbose = 0;
+ void z_error (char *m) {fprintf(stderr, "%s\n", m); exit(1);}
+
+#define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+
+#else
+
+#ifndef __noop
+#if _MSC_VER < 1300
+#define __noop ((void)0)
+#endif
+#endif
+
+#define Assert(cond,msg) __noop
+#define Trace(x) __noop
+#define Tracev(x) __noop
+#define Tracevv(x) __noop
+#define Tracec(c,x) __noop
+#define Tracecv(c,x) __noop
+
+#endif
+
+
+typedef uLong (*check_func) (uLong check, const Byte *buf, uInt len);
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size);
+void zcfree (voidpf opaque, voidpf ptr);
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+
+//void ZFREE(z_streamp strm,voidpf addr)
+//{ *((strm)->zfree))((strm)->opaque, addr);
+//}
+
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+
+
+
+// Huffman code lookup table entry--this entry is four bytes for machines
+// that have 16-bit pointers (e.g. PC's in the small or medium model).
+
+
+typedef struct inflate_huft_s inflate_huft;
+
+struct inflate_huft_s {
+ union {
+ struct {
+ Byte Exop; // number of extra bits or operation
+ Byte Bits; // number of bits in this code or subcode
+ } what;
+ uInt pad; // pad structure to a power of 2 (4 bytes for
+ } word; // 16-bit, 8 bytes for 32-bit int's)
+ uInt base; // literal, length base, distance base, or table offset
+};
+
+// Maximum size of dynamic tree. The maximum found in a long but non-
+// exhaustive search was 1004 huft structures (850 for length/literals
+// and 154 for distances, the latter actually the result of an
+// exhaustive search). The actual maximum is not known, but the
+// value below is more than safe.
+#define MANY 1440
+
+int inflate_trees_bits (
+ uInt *, // 19 code lengths
+ uInt *, // bits tree desired/actual depth
+ inflate_huft * *, // bits tree result
+ inflate_huft *, // space for trees
+ z_streamp); // for messages
+
+int inflate_trees_dynamic (
+ uInt, // number of literal/length codes
+ uInt, // number of distance codes
+ uInt *, // that many (total) code lengths
+ uInt *, // literal desired/actual bit depth
+ uInt *, // distance desired/actual bit depth
+ inflate_huft * *, // literal/length tree result
+ inflate_huft * *, // distance tree result
+ inflate_huft *, // space for trees
+ z_streamp); // for messages
+
+int inflate_trees_fixed (
+ uInt *, // literal desired/actual bit depth
+ uInt *, // distance desired/actual bit depth
+ const inflate_huft * *, // literal/length tree result
+ const inflate_huft * *, // distance tree result
+ z_streamp); // for memory allocation
+
+
+
+
+
+struct inflate_blocks_state;
+typedef struct inflate_blocks_state inflate_blocks_statef;
+
+inflate_blocks_statef * inflate_blocks_new (
+ z_streamp z,
+ check_func c, // check function
+ uInt w); // window size
+
+int inflate_blocks (
+ inflate_blocks_statef *,
+ z_streamp ,
+ int); // initial return code
+
+void inflate_blocks_reset (
+ inflate_blocks_statef *,
+ z_streamp ,
+ uLong *); // check value on output
+
+int inflate_blocks_free (
+ inflate_blocks_statef *,
+ z_streamp);
+
+void inflate_set_dictionary (
+ inflate_blocks_statef *s,
+ const Byte *d, // dictionary
+ uInt n); // dictionary length
+
+int inflate_blocks_sync_point (
+ inflate_blocks_statef *s);
+
+
+
+
+struct inflate_codes_state;
+typedef struct inflate_codes_state inflate_codes_statef;
+
+inflate_codes_statef *inflate_codes_new (
+ uInt, uInt,
+ const inflate_huft *, const inflate_huft *,
+ z_streamp );
+
+int inflate_codes (
+ inflate_blocks_statef *,
+ z_streamp ,
+ int);
+
+void inflate_codes_free (
+ inflate_codes_statef *,
+ z_streamp );
+
+
+
+
+typedef enum {
+ IBM_TYPE, // get type bits (3, including end bit)
+ IBM_LENS, // get lengths for stored
+ IBM_STORED, // processing stored block
+ IBM_TABLE, // get table lengths
+ IBM_BTREE, // get bit lengths tree for a dynamic block
+ IBM_DTREE, // get length, distance trees for a dynamic block
+ IBM_CODES, // processing fixed or dynamic block
+ IBM_DRY, // output remaining window bytes
+ IBM_DONE, // finished last block, done
+ IBM_BAD} // got a data error--stuck here
+inflate_block_mode;
+
+// inflate blocks semi-private state
+struct inflate_blocks_state {
+
+ // mode
+ inflate_block_mode mode; // current inflate_block mode
+
+ // mode dependent information
+ union {
+ uInt left; // if STORED, bytes left to copy
+ struct {
+ uInt table; // table lengths (14 bits)
+ uInt index; // index into blens (or border)
+ uInt *blens; // bit lengths of codes
+ uInt bb; // bit length tree depth
+ inflate_huft *tb; // bit length decoding tree
+ } trees; // if DTREE, decoding info for trees
+ struct {
+ inflate_codes_statef
+ *codes;
+ } decode; // if CODES, current state
+ } sub; // submode
+ uInt last; // true if this block is the last block
+
+ // mode independent information
+ uInt bitk; // bits in bit buffer
+ uLong bitb; // bit buffer
+ inflate_huft *hufts; // single malloc for tree space
+ Byte *window; // sliding window
+ Byte *end; // one byte after sliding window
+ Byte *read; // window read pointer
+ Byte *write; // window write pointer
+ check_func checkfn; // check function
+ uLong check; // check on output
+
+};
+
+
+// defines for inflate input/output
+// update pointers and return
+#define UPDBITS {s->bitb=b;s->bitk=k;}
+#define UPDIN {z->avail_in=n;z->total_in+=(uLong)(p-z->next_in);z->next_in=p;}
+#define UPDOUT {s->write=q;}
+#define UPDATE {UPDBITS UPDIN UPDOUT}
+#define LEAVE {UPDATE return inflate_flush(s,z,r);}
+// get bytes and bits
+#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
+#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
+#define NEXTBYTE (n--,*p++)
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define DUMPBITS(j) {b>>=(j);k-=(j);}
+// output bytes
+#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
+#define LOADOUT {q=s->write;m=(uInt)WAVAIL;m;}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
+#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
+#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
+// load local pointers
+#define LOAD {LOADIN LOADOUT}
+
+// masks for lower bits (size given to avoid silly warnings with Visual C++)
+// And'ing with mask[n] masks the lower n bits
+const uInt inflate_mask[17] = {
+ 0x0000,
+ 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+ 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
+
+// copy as much as possible from the sliding window to the output area
+int inflate_flush (inflate_blocks_statef *, z_streamp, int);
+
+int inflate_fast (uInt, uInt, const inflate_huft *, const inflate_huft *, inflate_blocks_statef *, z_streamp );
+
+
+
+const uInt fixed_bl = 9;
+const uInt fixed_bd = 5;
+const inflate_huft fixed_tl[] = {
+ {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+ {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+ {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+ {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+ {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+ {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+ {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+ {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+ {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+ {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+ {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+ {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+ {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+ {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+ {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+ {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+ {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+ {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+ {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+ {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+ {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+ {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+ {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+ {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+ {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+ {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+ {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+ {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+ {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+ {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+ {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+ {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+ {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+ {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+ {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+ {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+ {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+ {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+ {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+ {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+ {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+ {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+ {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+ {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+ {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+ {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+ {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+ {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+ {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+ {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+ {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+ {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+ {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+ {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+ {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+ {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+ {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+ {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+ {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+ {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+ {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+ {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+ {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+ {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+ {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+ {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+ {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+ {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+ {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+ {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+ {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+ {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+ {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+ {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+ {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+ {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+ {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+ {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+ {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+ {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+ {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+ {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+ {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+ {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+ {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+ {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+ {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+ {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+ {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+ {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+ {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+ {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+ {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+ {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+ {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+ {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+ {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+ {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+ {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+ {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+ {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+ {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+ {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+ {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+ {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+ {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+ {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+ {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+ {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+ {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+ {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+ {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+ {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+ {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+ {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+ {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+ {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+ {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+ {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+ {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+ {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+ {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+ {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+ {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+ };
+const inflate_huft fixed_td[] = {
+ {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+ {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+ {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+ {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+ {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+ {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+ {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+ {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+ };
+
+
+
+
+
+
+
+// copy as much as possible from the sliding window to the output area
+int inflate_flush(inflate_blocks_statef *s,z_streamp z,int r)
+{
+ uInt n;
+ Byte *p;
+ Byte *q;
+
+ // local copies of source and destination pointers
+ p = z->next_out;
+ q = s->read;
+
+ // compute number of bytes to copy as far as end of window
+ n = (uInt)((q <= s->write ? s->write : s->end) - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ // update counters
+ z->avail_out -= n;
+ z->total_out += n;
+
+ // update check information
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+ // copy as far as end of window
+ if (n!=0) // check for n!=0 to avoid waking up CodeGuard
+ { memcpy(p, q, n);
+ p += n;
+ q += n;
+ }
+
+ // see if more to copy at beginning of window
+ if (q == s->end)
+ {
+ // wrap pointers
+ q = s->window;
+ if (s->write == s->end)
+ s->write = s->window;
+
+ // compute bytes to copy
+ n = (uInt)(s->write - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ // update counters
+ z->avail_out -= n;
+ z->total_out += n;
+
+ // update check information
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+ // copy
+ memcpy(p, q, n);
+ p += n;
+ q += n;
+ }
+
+ // update pointers
+ z->next_out = p;
+ s->read = q;
+
+ // done
+ return r;
+}
+
+
+
+
+
+
+// simplify the use of the inflate_huft type with some defines
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+typedef enum { // waiting for "i:"=input, "o:"=output, "x:"=nothing
+ START, // x: set up for LEN
+ LEN, // i: get length/literal/eob next
+ LENEXT, // i: getting length extra (have base)
+ DIST, // i: get distance next
+ DISTEXT, // i: getting distance extra
+ COPY, // o: copying bytes in window, waiting for space
+ LIT, // o: got literal, waiting for output space
+ WASH, // o: got eob, possibly still output waiting
+ END, // x: got eob and all data flushed
+ BADCODE} // x: got error
+inflate_codes_mode;
+
+// inflate codes private state
+struct inflate_codes_state {
+
+ // mode
+ inflate_codes_mode mode; // current inflate_codes mode
+
+ // mode dependent information
+ uInt len;
+ union {
+ struct {
+ const inflate_huft *tree; // pointer into tree
+ uInt need; // bits needed
+ } code; // if LEN or DIST, where in tree
+ uInt lit; // if LIT, literal
+ struct {
+ uInt get; // bits to get for extra
+ uInt dist; // distance back to copy from
+ } copy; // if EXT or COPY, where and how much
+ } sub; // submode
+
+ // mode independent information
+ Byte lbits; // ltree bits decoded per branch
+ Byte dbits; // dtree bits decoder per branch
+ const inflate_huft *ltree; // literal/length/eob tree
+ const inflate_huft *dtree; // distance tree
+
+};
+
+
+inflate_codes_statef *inflate_codes_new(
+uInt bl, uInt bd,
+const inflate_huft *tl,
+const inflate_huft *td, // need separate declaration for Borland C++
+z_streamp z)
+{
+ inflate_codes_statef *c;
+
+ if ((c = (inflate_codes_statef *)
+ ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
+ {
+ c->mode = START;
+ c->lbits = (Byte)bl;
+ c->dbits = (Byte)bd;
+ c->ltree = tl;
+ c->dtree = td;
+ Tracev((stderr, "inflate: codes new\n"));
+ }
+ return c;
+}
+
+
+int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r)
+{
+ uInt j; // temporary storage
+ const inflate_huft *t; // temporary pointer
+ uInt e; // extra bits or operation
+ uLong b; // bit buffer
+ uInt k; // bits in bit buffer
+ Byte *p; // input data pointer
+ uInt n; // bytes available there
+ Byte *q; // output window write pointer
+ uInt m; // bytes to end of window or read pointer
+ Byte *f; // pointer to copy strings from
+ inflate_codes_statef *c = s->sub.decode.codes; // codes state
+
+ // copy input/output information to locals (UPDATE macro restores)
+ LOAD
+
+ // process input and output based on current state
+ for(;;) switch (c->mode)
+ { // waiting for "i:"=input, "o:"=output, "x:"=nothing
+ case START: // x: set up for LEN
+#ifndef SLOW
+ if (m >= 258 && n >= 10)
+ {
+ UPDATE
+ r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
+ LOAD
+ if (r != Z_OK)
+ {
+ c->mode = r == Z_STREAM_END ? WASH : BADCODE;
+ break;
+ }
+ }
+#endif // !SLOW
+ c->sub.code.need = c->lbits;
+ c->sub.code.tree = c->ltree;
+ c->mode = LEN;
+ case LEN: // i: get length/literal/eob next
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e == 0) // literal
+ {
+ c->sub.lit = t->base;
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", t->base));
+ c->mode = LIT;
+ break;
+ }
+ if (e & 16) // length
+ {
+ c->sub.copy.get = e & 15;
+ c->len = t->base;
+ c->mode = LENEXT;
+ break;
+ }
+ if ((e & 64) == 0) // next table
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t + t->base;
+ break;
+ }
+ if (e & 32) // end of block
+ {
+ Tracevv((stderr, "inflate: end of block\n"));
+ c->mode = WASH;
+ break;
+ }
+ c->mode = BADCODE; // invalid code
+ z->msg = (char*)"invalid literal/length code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case LENEXT: // i: getting length extra (have base)
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->len += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ c->sub.code.need = c->dbits;
+ c->sub.code.tree = c->dtree;
+ Tracevv((stderr, "inflate: length %u\n", c->len));
+ c->mode = DIST;
+ case DIST: // i: get distance next
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e & 16) // distance
+ {
+ c->sub.copy.get = e & 15;
+ c->sub.copy.dist = t->base;
+ c->mode = DISTEXT;
+ break;
+ }
+ if ((e & 64) == 0) // next table
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t + t->base;
+ break;
+ }
+ c->mode = BADCODE; // invalid code
+ z->msg = (char*)"invalid distance code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case DISTEXT: // i: getting distance extra
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->sub.copy.dist += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
+ c->mode = COPY;
+ case COPY: // o: copying bytes in window, waiting for space
+ f = (uInt)(q - s->window) < c->sub.copy.dist ?
+ s->end - (c->sub.copy.dist - (q - s->window)) :
+ q - c->sub.copy.dist;
+ while (c->len)
+ {
+ NEEDOUT
+ OUTBYTE(*f++)
+ if (f == s->end)
+ f = s->window;
+ c->len--;
+ }
+ c->mode = START;
+ break;
+ case LIT: // o: got literal, waiting for output space
+ NEEDOUT
+ OUTBYTE(c->sub.lit)
+ c->mode = START;
+ break;
+ case WASH: // o: got eob, possibly more output
+ if (k > 7) // return unused byte, if any
+ {
+ Assert(k < 16, "inflate_codes grabbed too many bytes");
+ k -= 8;
+ n++;
+ p--; // can always return one
+ }
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ c->mode = END;
+ case END:
+ r = Z_STREAM_END;
+ LEAVE
+ case BADCODE: // x: got error
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+}
+
+
+void inflate_codes_free(inflate_codes_statef *c,z_streamp z)
+{ ZFREE(z, c);
+ Tracev((stderr, "inflate: codes free\n"));
+}
+
+
+
+// infblock.c -- interpret and process block types to last block
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+
+//struct inflate_codes_state {int dummy;}; // for buggy compilers
+
+
+
+// Table for deflate from PKZIP's appnote.txt.
+const uInt border[] = { // Order of the bit length code lengths
+ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+//
+// Notes beyond the 1.93a appnote.txt:
+//
+// 1. Distance pointers never point before the beginning of the output stream.
+// 2. Distance pointers can point back across blocks, up to 32k away.
+// 3. There is an implied maximum of 7 bits for the bit length table and
+// 15 bits for the actual data.
+// 4. If only one code exists, then it is encoded using one bit. (Zero
+// would be more efficient, but perhaps a little confusing.) If two
+// codes exist, they are coded using one bit each (0 and 1).
+// 5. There is no way of sending zero distance codes--a dummy must be
+// sent if there are none. (History: a pre 2.0 version of PKZIP would
+// store blocks with no distance codes, but this was discovered to be
+// too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
+// zero distance codes, which is sent as one code of zero bits in
+// length.
+// 6. There are up to 286 literal/length codes. Code 256 represents the
+// end-of-block. Note however that the static length tree defines
+// 288 codes just to fill out the Huffman codes. Codes 286 and 287
+// cannot be used though, since there is no length base or extra bits
+// defined for them. Similarily, there are up to 30 distance codes.
+// However, static trees define 32 codes (all 5 bits) to fill out the
+// Huffman codes, but the last two had better not show up in the data.
+// 7. Unzip can check dynamic Huffman blocks for complete code sets.
+// The exception is that a single code would not be complete (see #4).
+// 8. The five bits following the block type is really the number of
+// literal codes sent minus 257.
+// 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
+// (1+6+6). Therefore, to output three times the length, you output
+// three codes (1+1+1), whereas to output four times the same length,
+// you only need two codes (1+3). Hmm.
+//10. In the tree reconstruction algorithm, Code = Code + Increment
+// only if BitLength(i) is not zero. (Pretty obvious.)
+//11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
+//12. Note: length code 284 can represent 227-258, but length code 285
+// really is 258. The last length deserves its own, short code
+// since it gets used a lot in very redundant files. The length
+// 258 is special since 258 - 3 (the min match length) is 255.
+//13. The literal/length and distance code bit lengths are read as a
+// single stream of lengths. It is possible (and advantageous) for
+// a repeat code (16, 17, or 18) to go across the boundary between
+// the two sets of lengths.
+
+
+void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c)
+{
+ if (c != Z_NULL)
+ *c = s->check;
+ if (s->mode == IBM_BTREE || s->mode == IBM_DTREE)
+ ZFREE(z, s->sub.trees.blens);
+ if (s->mode == IBM_CODES)
+ inflate_codes_free(s->sub.decode.codes, z);
+ s->mode = IBM_TYPE;
+ s->bitk = 0;
+ s->bitb = 0;
+ s->read = s->write = s->window;
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0);
+ Tracev((stderr, "inflate: blocks reset\n"));
+}
+
+
+inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w)
+{
+ inflate_blocks_statef *s;
+
+ if ((s = (inflate_blocks_statef *)ZALLOC
+ (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
+ return s;
+ if ((s->hufts =
+ (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+ {
+ ZFREE(z, s);
+ return Z_NULL;
+ }
+ if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL)
+ {
+ ZFREE(z, s->hufts);
+ ZFREE(z, s);
+ return Z_NULL;
+ }
+ s->end = s->window + w;
+ s->checkfn = c;
+ s->mode = IBM_TYPE;
+ Tracev((stderr, "inflate: blocks allocated\n"));
+ inflate_blocks_reset(s, z, Z_NULL);
+ return s;
+}
+
+
+int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r)
+{
+ uInt t; // temporary storage
+ uLong b; // bit buffer
+ uInt k; // bits in bit buffer
+ Byte *p; // input data pointer
+ uInt n; // bytes available there
+ Byte *q; // output window write pointer
+ uInt m; // bytes to end of window or read pointer
+
+ // copy input/output information to locals (UPDATE macro restores)
+ LOAD
+
+ // process input based on current state
+ for(;;) switch (s->mode)
+ {
+ case IBM_TYPE:
+ NEEDBITS(3)
+ t = (uInt)b & 7;
+ s->last = t & 1;
+ switch (t >> 1)
+ {
+ case 0: // stored
+ Tracev((stderr, "inflate: stored block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ t = k & 7; // go to byte boundary
+ DUMPBITS(t)
+ s->mode = IBM_LENS; // get length of stored block
+ break;
+ case 1: // fixed
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ s->last ? " (last)" : ""));
+ {
+ uInt bl, bd;
+ const inflate_huft *tl, *td;
+
+ inflate_trees_fixed(&bl, &bd, &tl, &td, z);
+ s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
+ if (s->sub.decode.codes == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ }
+ DUMPBITS(3)
+ s->mode = IBM_CODES;
+ break;
+ case 2: // dynamic
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ s->mode = IBM_TABLE;
+ break;
+ case 3: // illegal
+ DUMPBITS(3)
+ s->mode = IBM_BAD;
+ z->msg = (char*)"invalid block type";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ break;
+ case IBM_LENS:
+ NEEDBITS(32)
+ if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
+ {
+ s->mode = IBM_BAD;
+ z->msg = (char*)"invalid stored block lengths";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ s->sub.left = (uInt)b & 0xffff;
+ b = k = 0; // dump bits
+ Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
+ s->mode = s->sub.left ? IBM_STORED : (s->last ? IBM_DRY : IBM_TYPE);
+ break;
+ case IBM_STORED:
+ if (n == 0)
+ LEAVE
+ NEEDOUT
+ t = s->sub.left;
+ if (t > n) t = n;
+ if (t > m) t = m;
+ memcpy(q, p, t);
+ p += t; n -= t;
+ q += t; m -= t;
+ if ((s->sub.left -= t) != 0)
+ break;
+ Tracev((stderr, "inflate: stored end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ s->mode = s->last ? IBM_DRY : IBM_TYPE;
+ break;
+ case IBM_TABLE:
+ NEEDBITS(14)
+ s->sub.trees.table = t = (uInt)b & 0x3fff;
+ // remove this section to workaround bug in pkzip
+ if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
+ {
+ s->mode = IBM_BAD;
+ z->msg = (char*)"too many length or distance symbols";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ // end remove
+ t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
+ if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ DUMPBITS(14)
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ s->mode = IBM_BTREE;
+ case IBM_BTREE:
+ while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
+ {
+ NEEDBITS(3)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
+ DUMPBITS(3)
+ }
+ while (s->sub.trees.index < 19)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
+ s->sub.trees.bb = 7;
+ t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
+ &s->sub.trees.tb, s->hufts, z);
+ if (t != Z_OK)
+ {
+ ZFREE(z, s->sub.trees.blens);
+ r = t;
+ if (r == Z_DATA_ERROR)
+ s->mode = IBM_BAD;
+ LEAVE
+ }
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: bits tree ok\n"));
+ s->mode = IBM_DTREE;
+ case IBM_DTREE:
+ while (t = s->sub.trees.table,
+ s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
+ {
+ inflate_huft *h;
+ uInt i, j, c;
+
+ t = s->sub.trees.bb;
+ NEEDBITS(t)
+ h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
+ t = h->bits;
+ c = h->base;
+ if (c < 16)
+ {
+ DUMPBITS(t)
+ s->sub.trees.blens[s->sub.trees.index++] = c;
+ }
+ else // c == 16..18
+ {
+ i = c == 18 ? 7 : c - 14;
+ j = c == 18 ? 11 : 3;
+ NEEDBITS(t + i)
+ DUMPBITS(t)
+ j += (uInt)b & inflate_mask[i];
+ DUMPBITS(i)
+ i = s->sub.trees.index;
+ t = s->sub.trees.table;
+ if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
+ (c == 16 && i < 1))
+ {
+ ZFREE(z, s->sub.trees.blens);
+ s->mode = IBM_BAD;
+ z->msg = (char*)"invalid bit length repeat";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
+ do {
+ s->sub.trees.blens[i++] = c;
+ } while (--j);
+ s->sub.trees.index = i;
+ }
+ }
+ s->sub.trees.tb = Z_NULL;
+ {
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+ inflate_codes_statef *c;
+
+ bl = 9; // must be <= 9 for lookahead assumptions
+ bd = 6; // must be <= 9 for lookahead assumptions
+ t = s->sub.trees.table;
+ t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
+ s->sub.trees.blens, &bl, &bd, &tl, &td,
+ s->hufts, z);
+ ZFREE(z, s->sub.trees.blens);
+ if (t != Z_OK)
+ {
+ if (t == (uInt)Z_DATA_ERROR)
+ s->mode = IBM_BAD;
+ r = t;
+ LEAVE
+ }
+ Tracev((stderr, "inflate: trees ok\n"));
+ if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ s->sub.decode.codes = c;
+ }
+ s->mode = IBM_CODES;
+ case IBM_CODES:
+ UPDATE
+ if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
+ return inflate_flush(s, z, r);
+ r = Z_OK;
+ inflate_codes_free(s->sub.decode.codes, z);
+ LOAD
+ Tracev((stderr, "inflate: codes end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ if (!s->last)
+ {
+ s->mode = IBM_TYPE;
+ break;
+ }
+ s->mode = IBM_DRY;
+ case IBM_DRY:
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ s->mode = IBM_DONE;
+ case IBM_DONE:
+ r = Z_STREAM_END;
+ LEAVE
+ case IBM_BAD:
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+}
+
+
+int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z)
+{
+ inflate_blocks_reset(s, z, Z_NULL);
+ ZFREE(z, s->window);
+ ZFREE(z, s->hufts);
+ ZFREE(z, s);
+ Tracev((stderr, "inflate: blocks freed\n"));
+ return Z_OK;
+}
+
+
+
+// inftrees.c -- generate Huffman trees for efficient decoding
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+//
+
+
+
+extern const char inflate_copyright[] =
+ " ";//inflate 1.1.3 Copyright 1995-1998 Mark Adler ";
+// If you use the zlib library in a product, an acknowledgment is welcome
+// in the documentation of your product. If for some reason you cannot
+// include such an acknowledgment, I would appreciate that you keep this
+// copyright string in the executable of your product.
+
+
+
+int huft_build (
+ uInt *, // code lengths in bits
+ uInt, // number of codes
+ uInt, // number of "simple" codes
+ const uInt *, // list of base values for non-simple codes
+ const uInt *, // list of extra bits for non-simple codes
+ inflate_huft **,// result: starting table
+ uInt *, // maximum lookup bits (returns actual)
+ inflate_huft *, // space for trees
+ uInt *, // hufts used in space
+ uInt * ); // space for values
+
+// Tables for deflate from PKZIP's appnote.txt.
+const uInt cplens[31] = { // Copy lengths for literal codes 257..285
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ // see note #13 above about 258
+const uInt cplext[31] = { // Extra bits for literal codes 257..285
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; // 112==invalid
+const uInt cpdist[30] = { // Copy offsets for distance codes 0..29
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577};
+const uInt cpdext[30] = { // Extra bits for distance codes
+ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+ 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+ 12, 12, 13, 13};
+
+//
+// Huffman code decoding is performed using a multi-level table lookup.
+// The fastest way to decode is to simply build a lookup table whose
+// size is determined by the longest code. However, the time it takes
+// to build this table can also be a factor if the data being decoded
+// is not very long. The most common codes are necessarily the
+// shortest codes, so those codes dominate the decoding time, and hence
+// the speed. The idea is you can have a shorter table that decodes the
+// shorter, more probable codes, and then point to subsidiary tables for
+// the longer codes. The time it costs to decode the longer codes is
+// then traded against the time it takes to make longer tables.
+//
+// This results of this trade are in the variables lbits and dbits
+// below. lbits is the number of bits the first level table for literal/
+// length codes can decode in one step, and dbits is the same thing for
+// the distance codes. Subsequent tables are also less than or equal to
+// those sizes. These values may be adjusted either when all of the
+// codes are shorter than that, in which case the longest code length in
+// bits is used, or when the shortest code is *longer* than the requested
+// table size, in which case the length of the shortest code in bits is
+// used.
+//
+// There are two different values for the two tables, since they code a
+// different number of possibilities each. The literal/length table
+// codes 286 possible values, or in a flat code, a little over eight
+// bits. The distance table codes 30 possible values, or a little less
+// than five bits, flat. The optimum values for speed end up being
+// about one bit more than those, so lbits is 8+1 and dbits is 5+1.
+// The optimum values may differ though from machine to machine, and
+// possibly even between compilers. Your mileage may vary.
+//
+
+
+// If BMAX needs to be larger than 16, then h and x[] should be uLong.
+#define BMAX 15 // maximum bit length of any code
+
+int huft_build(
+uInt *b, // code lengths in bits (all assumed <= BMAX)
+uInt n, // number of codes (assumed <= 288)
+uInt s, // number of simple-valued codes (0..s-1)
+const uInt *d, // list of base values for non-simple codes
+const uInt *e, // list of extra bits for non-simple codes
+inflate_huft * *t, // result: starting table
+uInt *m, // maximum lookup bits, returns actual
+inflate_huft *hp, // space for trees
+uInt *hn, // hufts used in space
+uInt *v) // working area: values in order of bit length
+// Given a list of code lengths and a maximum table size, make a set of
+// tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
+// if the given code set is incomplete (the tables are still built in this
+// case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
+// lengths), or Z_MEM_ERROR if not enough memory.
+{
+
+ uInt a; // counter for codes of length k
+ uInt c[BMAX+1]; // bit length count table
+ uInt f; // i repeats in table every f entries
+ int g; // maximum code length
+ int h; // table level
+ register uInt i; // counter, current code
+ register uInt j; // counter
+ register int k; // number of bits in current code
+ int l; // bits per table (returned in m)
+ uInt mask; // (1 << w) - 1, to avoid cc -O bug on HP
+ register uInt *p; // pointer into c[], b[], or v[]
+ inflate_huft *q; // points to current table
+ struct inflate_huft_s r; // table entry for structure assignment
+ inflate_huft *u[BMAX]; // table stack
+ register int w; // bits before this table == (l * h)
+ uInt x[BMAX+1]; // bit offsets, then code stack
+ uInt *xp; // pointer into x
+ int y; // number of dummy codes added
+ uInt z; // number of entries in current table
+
+
+ // Generate counts for each bit length
+ p = c;
+#define C0 *p++ = 0;
+#define C2 C0 C0 C0 C0
+#define C4 C2 C2 C2 C2
+ C4; p; // clear c[]--assume BMAX+1 is 16
+ p = b; i = n;
+ do {
+ c[*p++]++; // assume all entries <= BMAX
+ } while (--i);
+ if (c[0] == n) // null input--all zero length codes
+ {
+ *t = (inflate_huft *)Z_NULL;
+ *m = 0;
+ return Z_OK;
+ }
+
+
+ // Find minimum and maximum length, bound *m by those
+ l = *m;
+ for (j = 1; j <= BMAX; j++)
+ if (c[j])
+ break;
+ k = j; // minimum code length
+ if ((uInt)l < j)
+ l = j;
+ for (i = BMAX; i; i--)
+ if (c[i])
+ break;
+ g = i; // maximum code length
+ if ((uInt)l > i)
+ l = i;
+ *m = l;
+
+
+ // Adjust last length count to fill out codes, if needed
+ for (y = 1 << j; j < i; j++, y <<= 1)
+ if ((y -= c[j]) < 0)
+ return Z_DATA_ERROR;
+ if ((y -= c[i]) < 0)
+ return Z_DATA_ERROR;
+ c[i] += y;
+
+
+ // Generate starting offsets into the value table for each length
+ x[1] = j = 0;
+ p = c + 1; xp = x + 2;
+ while (--i) { // note that i == g from above
+ *xp++ = (j += *p++);
+ }
+
+
+ // Make a table of values in order of bit lengths
+ p = b; i = 0;
+ do {
+ if ((j = *p++) != 0)
+ v[x[j]++] = i;
+ } while (++i < n);
+ n = x[g]; // set n to length of v
+
+
+ // Generate the Huffman codes and for each, make the table entries
+ x[0] = i = 0; // first Huffman code is zero
+ p = v; // grab values in bit order
+ h = -1; // no tables yet--level -1
+ w = -l; // bits decoded == (l * h)
+ u[0] = (inflate_huft *)Z_NULL; // just to keep compilers happy
+ q = (inflate_huft *)Z_NULL; // ditto
+ z = 0; // ditto
+
+ // go through the bit lengths (k already is bits in shortest code)
+ for (; k <= g; k++)
+ {
+ a = c[k];
+ while (a--)
+ {
+ // here i is the Huffman code of length k bits for value *p
+ // make tables up to required level
+ while (k > w + l)
+ {
+ h++;
+ w += l; // previous table always l bits
+
+ // compute minimum size table less than or equal to l bits
+ z = g - w;
+ z = z > (uInt)l ? l : z; // table size upper limit
+ if ((f = 1 << (j = k - w)) > a + 1) // try a k-w bit table
+ { // too few codes for k-w bit table
+ f -= a + 1; // deduct codes from patterns left
+ xp = c + k;
+ if (j < z)
+ while (++j < z) // try smaller tables up to z bits
+ {
+ if ((f <<= 1) <= *++xp)
+ break; // enough codes to use up j bits
+ f -= *xp; // else deduct codes from patterns
+ }
+ }
+ z = 1 << j; // table entries for j-bit table
+
+ // allocate new table
+ if (*hn + z > MANY) // (note: doesn't matter for fixed)
+ return Z_MEM_ERROR; // not enough memory
+ u[h] = q = hp + *hn;
+ *hn += z;
+
+ // connect to last table, if there is one
+ if (h)
+ {
+ x[h] = i; // save pattern for backing up
+ r.bits = (Byte)l; // bits to dump before this table
+ r.exop = (Byte)j; // bits in this table
+ j = i >> (w - l);
+ r.base = (uInt)(q - u[h-1] - j); // offset to this table
+ u[h-1][j] = r; // connect to last table
+ }
+ else
+ *t = q; // first table is returned result
+ }
+
+ // set up table entry in r
+ r.bits = (Byte)(k - w);
+ if (p >= v + n)
+ r.exop = 128 + 64; // out of values--invalid code
+ else if (*p < s)
+ {
+ r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); // 256 is end-of-block
+ r.base = *p++; // simple code is just the value
+ }
+ else
+ {
+ r.exop = (Byte)(e[*p - s] + 16 + 64);// non-simple--look up in lists
+ r.base = d[*p++ - s];
+ }
+
+ // fill code-like entries with r
+ f = 1 << (k - w);
+ for (j = i >> w; j < z; j += f)
+ q[j] = r;
+
+ // backwards increment the k-bit code i
+ for (j = 1 << (k - 1); i & j; j >>= 1)
+ i ^= j;
+ i ^= j;
+
+ // backup over finished tables
+ mask = (1 << w) - 1; // needed on HP, cc -O bug
+ while ((i & mask) != x[h])
+ {
+ h--; // don't need to update q
+ w -= l;
+ mask = (1 << w) - 1;
+ }
+ }
+ }
+
+
+ // Return Z_BUF_ERROR if we were given an incomplete table
+ return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
+}
+
+
+int inflate_trees_bits(
+uInt *c, // 19 code lengths
+uInt *bb, // bits tree desired/actual depth
+inflate_huft * *tb, // bits tree result
+inflate_huft *hp, // space for trees
+z_streamp z) // for messages
+{
+ int r;
+ uInt hn = 0; // hufts used in space
+ uInt *v; // work area for huft_build
+
+ if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+ return Z_MEM_ERROR;
+ r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL,
+ tb, bb, hp, &hn, v);
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed dynamic bit lengths tree";
+ else if (r == Z_BUF_ERROR || *bb == 0)
+ {
+ z->msg = (char*)"incomplete dynamic bit lengths tree";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+}
+
+
+int inflate_trees_dynamic(
+uInt nl, // number of literal/length codes
+uInt nd, // number of distance codes
+uInt *c, // that many (total) code lengths
+uInt *bl, // literal desired/actual bit depth
+uInt *bd, // distance desired/actual bit depth
+inflate_huft * *tl, // literal/length tree result
+inflate_huft * *td, // distance tree result
+inflate_huft *hp, // space for trees
+z_streamp z) // for messages
+{
+ int r;
+ uInt hn = 0; // hufts used in space
+ uInt *v; // work area for huft_build
+
+ // allocate work area
+ if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+ return Z_MEM_ERROR;
+
+ // build literal/length tree
+ r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
+ if (r != Z_OK || *bl == 0)
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed literal/length tree";
+ else if (r != Z_MEM_ERROR)
+ {
+ z->msg = (char*)"incomplete literal/length tree";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+ }
+
+ // build distance tree
+ r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
+ if (r != Z_OK || (*bd == 0 && nl > 257))
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed distance tree";
+ else if (r == Z_BUF_ERROR) {
+ z->msg = (char*)"incomplete distance tree";
+ r = Z_DATA_ERROR;
+ }
+ else if (r != Z_MEM_ERROR)
+ {
+ z->msg = (char*)"empty distance tree with lengths";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+ }
+
+ // done
+ ZFREE(z, v);
+ return Z_OK;
+}
+
+
+
+
+
+int inflate_trees_fixed(
+uInt *bl, // literal desired/actual bit depth
+uInt *bd, // distance desired/actual bit depth
+const inflate_huft * * tl, // literal/length tree result
+const inflate_huft * *td, // distance tree result
+z_streamp ) // for memory allocation
+{
+ *bl = fixed_bl;
+ *bd = fixed_bd;
+ *tl = fixed_tl;
+ *td = fixed_td;
+ return Z_OK;
+}
+
+
+// inffast.c -- process literals and length/distance pairs fast
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+//
+
+
+//struct inflate_codes_state {int dummy;}; // for buggy compilers
+
+
+// macros for bit input with no checking and for returning unused bytes
+#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
+
+// Called with number of bytes left to write in window at least 258
+// (the maximum string length) and number of input bytes available
+// at least ten. The ten bytes are six bytes for the longest length/
+// distance pair plus four bytes for overloading the bit buffer.
+
+int inflate_fast(
+uInt bl, uInt bd,
+const inflate_huft *tl,
+const inflate_huft *td, // need separate declaration for Borland C++
+inflate_blocks_statef *s,
+z_streamp z)
+{
+ const inflate_huft *t; // temporary pointer
+ uInt e; // extra bits or operation
+ uLong b; // bit buffer
+ uInt k; // bits in bit buffer
+ Byte *p; // input data pointer
+ uInt n; // bytes available there
+ Byte *q; // output window write pointer
+ uInt m; // bytes to end of window or read pointer
+ uInt ml; // mask for literal/length tree
+ uInt md; // mask for distance tree
+ uInt c; // bytes to copy
+ uInt d; // distance back to copy from
+ Byte *r; // copy source pointer
+
+ // load input, output, bit values
+ LOAD
+
+ // initialize masks
+ ml = inflate_mask[bl];
+ md = inflate_mask[bd];
+
+ // do until not enough input or output space for fast loop
+ do { // assume called with m >= 258 && n >= 10
+ // get literal/length code
+ GRABBITS(20) // max bits for literal/length code
+ if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ continue;
+ }
+ for (;;) {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ // get extra bits for length
+ e &= 15;
+ c = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * length %u\n", c));
+
+ // decode distance base of block to copy
+ GRABBITS(15); // max bits for distance code
+ e = (t = td + ((uInt)b & md))->exop;
+ for (;;) {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ // get extra bits to add to distance base
+ e &= 15;
+ GRABBITS(e) // get extra bits (up to 13)
+ d = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * distance %u\n", d));
+
+ // do the copy
+ m -= c;
+ if ((uInt)(q - s->window) >= d) // offset before dest
+ { // just copy
+ r = q - d;
+ *q++ = *r++; c--; // minimum count is three,
+ *q++ = *r++; c--; // so unroll loop a little
+ }
+ else // else offset after destination
+ {
+ e = d - (uInt)(q - s->window); // bytes from offset to end
+ r = s->end - e; // pointer to offset
+ if (c > e) // if source crosses,
+ {
+ c -= e; // copy to end of window
+ do {
+ *q++ = *r++;
+ } while (--e);
+ r = s->window; // copy rest from start of window
+ }
+ }
+ do { // copy all or what's left
+ *q++ = *r++;
+ } while (--c);
+ break;
+ }
+ else if ((e & 64) == 0)
+ {
+ t += t->base;
+ e = (t += ((uInt)b & inflate_mask[e]))->exop;
+ }
+ else
+ {
+ z->msg = (char*)"invalid distance code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ };
+ break;
+ }
+ if ((e & 64) == 0)
+ {
+ t += t->base;
+ if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ break;
+ }
+ }
+ else if (e & 32)
+ {
+ Tracevv((stderr, "inflate: * end of block\n"));
+ UNGRAB
+ UPDATE
+ return Z_STREAM_END;
+ }
+ else
+ {
+ z->msg = (char*)"invalid literal/length code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ };
+ } while (m >= 258 && n >= 10);
+
+ // not enough input or output--restore pointers and return
+ UNGRAB
+ UPDATE
+ return Z_OK;
+}
+
+
+
+
+
+
+// crc32.c -- compute the CRC-32 of a data stream
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+
+// @(#) $Id$
+
+
+
+
+
+
+// Table of CRC-32's of all single-byte values (made by make_crc_table)
+const uLong crc_table[256] = {
+ 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+ 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+ 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+ 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+ 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+ 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+ 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+ 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+ 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+ 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+ 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+ 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+ 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+ 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+ 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+ 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+ 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+ 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+ 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+ 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+ 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+ 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+ 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+ 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+ 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+ 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+ 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+ 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+ 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+ 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+ 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+ 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+ 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+ 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+ 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+ 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+ 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+ 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+ 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+ 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+ 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+ 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+ 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+ 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+ 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+ 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+ 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+ 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+ 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+ 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+ 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+ 0x2d02ef8dL
+};
+
+const uLong * get_crc_table()
+{ return (const uLong *)crc_table;
+}
+
+#define CRC_DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+#define CRC_DO2(buf) CRC_DO1(buf); CRC_DO1(buf);
+#define CRC_DO4(buf) CRC_DO2(buf); CRC_DO2(buf);
+#define CRC_DO8(buf) CRC_DO4(buf); CRC_DO4(buf);
+
+uLong ucrc32(uLong crc, const Byte *buf, uInt len)
+{ if (buf == Z_NULL) return 0L;
+ crc = crc ^ 0xffffffffL;
+ while (len >= 8) {CRC_DO8(buf); len -= 8;}
+ if (len) do {CRC_DO1(buf);} while (--len);
+ return crc ^ 0xffffffffL;
+}
+
+
+// adler32.c -- compute the Adler-32 checksum of a data stream
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+
+// @(#) $Id$
+
+
+#define BASE 65521L // largest prime smaller than 65536
+#define NMAX 5552
+// NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1
+
+#define AD_DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define AD_DO2(buf,i) AD_DO1(buf,i); AD_DO1(buf,i+1);
+#define AD_DO4(buf,i) AD_DO2(buf,i); AD_DO2(buf,i+2);
+#define AD_DO8(buf,i) AD_DO4(buf,i); AD_DO4(buf,i+4);
+#define AD_DO16(buf) AD_DO8(buf,0); AD_DO8(buf,8);
+
+// =========================================================================
+uLong adler32(uLong adler, const Byte *buf, uInt len)
+{
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int k;
+
+ if (buf == Z_NULL) return 1L;
+
+ while (len > 0) {
+ k = len < NMAX ? len : NMAX;
+ len -= k;
+ while (k >= 16) {
+ AD_DO16(buf);
+ buf += 16;
+ k -= 16;
+ }
+ if (k != 0) do {
+ s1 += *buf++;
+ s2 += s1;
+ } while (--k);
+ s1 %= BASE;
+ s2 %= BASE;
+ }
+ return (s2 << 16) | s1;
+}
+
+
+
+// zutil.c -- target dependent utility functions for the compression library
+// Copyright (C) 1995-1998 Jean-loup Gailly.
+// For conditions of distribution and use, see copyright notice in zlib.h
+// @(#) $Id$
+
+
+
+
+
+
+const char * zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+// exported to allow conversion of error code to string for compress() and
+// uncompress()
+const char * zError(int err)
+{ return ERR_MSG(err);
+}
+
+
+
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ if (opaque) items += size - size; // make compiler happy
+ return (voidpf)calloc(items, size);
+}
+
+void zcfree (voidpf opaque, voidpf ptr)
+{
+ zfree(ptr);
+ if (opaque) return; // make compiler happy
+}
+
+
+
+// inflate.c -- zlib interface to inflate modules
+// Copyright (C) 1995-1998 Mark Adler
+// For conditions of distribution and use, see copyright notice in zlib.h
+
+//struct inflate_blocks_state {int dummy;}; // for buggy compilers
+
+typedef enum {
+ IM_METHOD, // waiting for method byte
+ IM_FLAG, // waiting for flag byte
+ IM_DICT4, // four dictionary check bytes to go
+ IM_DICT3, // three dictionary check bytes to go
+ IM_DICT2, // two dictionary check bytes to go
+ IM_DICT1, // one dictionary check byte to go
+ IM_DICT0, // waiting for inflateSetDictionary
+ IM_BLOCKS, // decompressing blocks
+ IM_CHECK4, // four check bytes to go
+ IM_CHECK3, // three check bytes to go
+ IM_CHECK2, // two check bytes to go
+ IM_CHECK1, // one check byte to go
+ IM_DONE, // finished check, done
+ IM_BAD} // got an error--stay here
+inflate_mode;
+
+// inflate private state
+struct internal_state {
+
+ // mode
+ inflate_mode mode; // current inflate mode
+
+ // mode dependent information
+ union {
+ uInt method; // if IM_FLAGS, method byte
+ struct {
+ uLong was; // computed check value
+ uLong need; // stream check value
+ } check; // if CHECK, check values to compare
+ uInt marker; // if IM_BAD, inflateSync's marker bytes count
+ } sub; // submode
+
+ // mode independent information
+ int nowrap; // flag for no wrapper
+ uInt wbits; // log2(window size) (8..15, defaults to 15)
+ inflate_blocks_statef
+ *blocks; // current inflate_blocks state
+
+};
+
+int inflateReset(z_streamp z)
+{
+ if (z == Z_NULL || z->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ z->total_in = z->total_out = 0;
+ z->msg = Z_NULL;
+ z->state->mode = z->state->nowrap ? IM_BLOCKS : IM_METHOD;
+ inflate_blocks_reset(z->state->blocks, z, Z_NULL);
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+int inflateEnd(z_streamp z)
+{
+ if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+ return Z_STREAM_ERROR;
+ if (z->state->blocks != Z_NULL)
+ inflate_blocks_free(z->state->blocks, z);
+ ZFREE(z, z->state);
+ z->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+
+int inflateInit2(z_streamp z)
+{ const char *version = ZLIB_VERSION; int stream_size = sizeof(z_stream);
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || stream_size != sizeof(z_stream)) return Z_VERSION_ERROR;
+
+ int w = -15; // MAX_WBITS: 32K LZ77 window.
+ // Warning: reducing MAX_WBITS makes minigzip unable to extract .gz files created by gzip.
+ // The memory requirements for deflate are (in bytes):
+ // (1 << (windowBits+2)) + (1 << (memLevel+9))
+ // that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ // plus a few kilobytes for small objects. For example, if you want to reduce
+ // the default memory requirements from 256K to 128K, compile with
+ // make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ // Of course this will generally degrade compression (there's no free lunch).
+ //
+ // The memory requirements for inflate are (in bytes) 1 << windowBits
+ // that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ // for small objects.
+
+ // initialize state
+ if (z == Z_NULL) return Z_STREAM_ERROR;
+ z->msg = Z_NULL;
+ if (z->zalloc == Z_NULL)
+ {
+ z->zalloc = zcalloc;
+ z->opaque = (voidpf)0;
+ }
+ if (z->zfree == Z_NULL) z->zfree = zcfree;
+ if ((z->state = (struct internal_state *)
+ ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
+ return Z_MEM_ERROR;
+ z->state->blocks = Z_NULL;
+
+ // handle undocumented nowrap option (no zlib header or check)
+ z->state->nowrap = 0;
+ if (w < 0)
+ {
+ w = - w;
+ z->state->nowrap = 1;
+ }
+
+ // set window size
+ if (w < 8 || w > 15)
+ {
+ inflateEnd(z);
+ return Z_STREAM_ERROR;
+ }
+ z->state->wbits = (uInt)w;
+
+ // create inflate_blocks state
+ if ((z->state->blocks =
+ inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
+ == Z_NULL)
+ {
+ inflateEnd(z);
+ return Z_MEM_ERROR;
+ }
+ Tracev((stderr, "inflate: allocated\n"));
+
+ // reset state
+ inflateReset(z);
+ return Z_OK;
+}
+
+
+
+#define IM_NEEDBYTE {if(z->avail_in==0)return r;r=f;}
+#define IM_NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+
+int inflate(z_streamp z, int f)
+{
+ int r;
+ uInt b;
+
+ if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
+ return Z_STREAM_ERROR;
+ f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
+ r = Z_BUF_ERROR;
+ for (;;) switch (z->state->mode)
+ {
+ case IM_METHOD:
+ IM_NEEDBYTE
+ if (((z->state->sub.method = IM_NEXTBYTE) & 0xf) != Z_DEFLATED)
+ {
+ z->state->mode = IM_BAD;
+ z->msg = (char*)"unknown compression method";
+ z->state->sub.marker = 5; // can't try inflateSync
+ break;
+ }
+ if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
+ {
+ z->state->mode = IM_BAD;
+ z->msg = (char*)"invalid window size";
+ z->state->sub.marker = 5; // can't try inflateSync
+ break;
+ }
+ z->state->mode = IM_FLAG;
+ case IM_FLAG:
+ IM_NEEDBYTE
+ b = IM_NEXTBYTE;
+ if (((z->state->sub.method << 8) + b) % 31)
+ {
+ z->state->mode = IM_BAD;
+ z->msg = (char*)"incorrect header check";
+ z->state->sub.marker = 5; // can't try inflateSync
+ break;
+ }
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ if (!(b & PRESET_DICT))
+ {
+ z->state->mode = IM_BLOCKS;
+ break;
+ }
+ z->state->mode = IM_DICT4;
+ case IM_DICT4:
+ IM_NEEDBYTE
+ z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24;
+ z->state->mode = IM_DICT3;
+ case IM_DICT3:
+ IM_NEEDBYTE
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16;
+ z->state->mode = IM_DICT2;
+ case IM_DICT2:
+ IM_NEEDBYTE
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8;
+ z->state->mode = IM_DICT1;
+ case IM_DICT1:
+ IM_NEEDBYTE; r;
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE;
+ z->adler = z->state->sub.check.need;
+ z->state->mode = IM_DICT0;
+ return Z_NEED_DICT;
+ case IM_DICT0:
+ z->state->mode = IM_BAD;
+ z->msg = (char*)"need dictionary";
+ z->state->sub.marker = 0; // can try inflateSync
+ return Z_STREAM_ERROR;
+ case IM_BLOCKS:
+ r = inflate_blocks(z->state->blocks, z, r);
+ if (r == Z_DATA_ERROR)
+ {
+ z->state->mode = IM_BAD;
+ z->state->sub.marker = 0; // can try inflateSync
+ break;
+ }
+ if (r == Z_OK)
+ r = f;
+ if (r != Z_STREAM_END)
+ return r;
+ r = f;
+ inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
+ if (z->state->nowrap)
+ {
+ z->state->mode = IM_DONE;
+ break;
+ }
+ z->state->mode = IM_CHECK4;
+ case IM_CHECK4:
+ IM_NEEDBYTE
+ z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24;
+ z->state->mode = IM_CHECK3;
+ case IM_CHECK3:
+ IM_NEEDBYTE
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16;
+ z->state->mode = IM_CHECK2;
+ case IM_CHECK2:
+ IM_NEEDBYTE
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8;
+ z->state->mode = IM_CHECK1;
+ case IM_CHECK1:
+ IM_NEEDBYTE
+ z->state->sub.check.need += (uLong)IM_NEXTBYTE;
+
+ if (z->state->sub.check.was != z->state->sub.check.need)
+ {
+ z->state->mode = IM_BAD;
+ z->msg = (char*)"incorrect data check";
+ z->state->sub.marker = 5; // can't try inflateSync
+ break;
+ }
+ Tracev((stderr, "inflate: zlib check ok\n"));
+ z->state->mode = IM_DONE;
+ case IM_DONE:
+ return Z_STREAM_END;
+ case IM_BAD:
+ return Z_DATA_ERROR;
+ default:
+ return Z_STREAM_ERROR;
+ }
+}
+
+
+
+#ifdef _UNICODE
+
+static int GetAnsiFileName(LPCWSTR name, char * buf, int nBufSize)
+{
+ memset(buf, 0, nBufSize);
+
+ int n = WideCharToMultiByte(CP_ACP, // code page
+ 0, // performance and mapping flags
+ name, // wide-character string
+ -1, // number of chars in string
+ buf, // buffer for new string
+ nBufSize, // size of buffer
+ NULL, // default for unmappable chars
+ NULL); // set when default char used
+ return n;
+}
+
+static int GetUnicodeFileName(const char * name, LPWSTR buf, int nBufSize)
+{
+ memset(buf, 0, nBufSize*sizeof(TCHAR));
+
+ int n = MultiByteToWideChar(CP_ACP, // code page
+ 0, // character-type options
+ name, // string to map
+ -1, // number of bytes in string
+ buf, // wide-character buffer
+ nBufSize); // size of buffer
+
+ return n;
+}
+
+#endif
+
+
+// unzip.c -- IO on .zip files using zlib
+// Version 0.15 beta, Mar 19th, 1998,
+// Read unzip.h for more info
+
+
+
+
+#define UNZ_BUFSIZE (16384)
+#define UNZ_MAXFILENAMEINZIP (256)
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+
+
+
+
+const char unz_copyright[] = " ";//unzip 0.15 Copyright 1998 Gilles Vollant ";
+
+// unz_file_info_interntal contain internal info about a file in zipfile
+typedef struct unz_file_info_internal_s
+{
+ uLong offset_curfile;// relative offset of local header 4 bytes
+} unz_file_info_internal;
+
+
+typedef struct
+{ bool is_handle; // either a handle or memory
+ bool canseek;
+ // for handles:
+ HANDLE h; bool herr; unsigned long initial_offset;
+ // for memory:
+ void *buf; unsigned int len,pos; // if it's a memory block
+} LUFILE;
+
+
+LUFILE *lufopen(void *z,unsigned int len,DWORD flags,ZRESULT *err)
+{
+ if (flags!=ZIP_HANDLE && flags!=ZIP_FILENAME && flags!=ZIP_MEMORY)
+ {
+ *err=ZR_ARGS;
+ return NULL;
+ }
+ //
+ HANDLE h=0; bool canseek=false; *err=ZR_OK;
+ if (flags==ZIP_HANDLE||flags==ZIP_FILENAME)
+ {
+ if (flags==ZIP_HANDLE)
+ {
+ HANDLE hf = z;
+
+ BOOL res = DuplicateHandle(GetCurrentProcess(),hf,GetCurrentProcess(),&h,0,FALSE,DUPLICATE_SAME_ACCESS);
+
+ if (!res)
+ {
+ *err=ZR_NODUPH;
+ return NULL;
+ }
+ }
+ else
+ {
+ h = CreateFile((const TCHAR *)z, GENERIC_READ, FILE_SHARE_READ,
+ NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
+
+ if (h == INVALID_HANDLE_VALUE)
+ {
+ *err = ZR_NOFILE;
+ return NULL;
+ }
+ }
+ DWORD type = GetFileType(h);
+ canseek = (type==FILE_TYPE_DISK);
+ }
+ LUFILE *lf = new LUFILE;
+ if (flags==ZIP_HANDLE||flags==ZIP_FILENAME)
+ {
+ lf->is_handle=true;
+ lf->canseek=canseek;
+ lf->h=h; lf->herr=false;
+ lf->initial_offset=0;
+ if (canseek)
+ lf->initial_offset = SetFilePointer(h,0,NULL,FILE_CURRENT);
+ }
+ else
+ {
+ lf->is_handle=false;
+ lf->canseek=true;
+ lf->buf=z;
+ lf->len=len;
+ lf->pos=0;
+ lf->initial_offset=0;
+ }
+ *err=ZR_OK;
+ return lf;
+}
+
+
+int lufclose(LUFILE *stream)
+{ if (stream==NULL) return EOF;
+ if (stream->is_handle) CloseHandle(stream->h);
+ delete stream;
+ return 0;
+}
+
+int luferror(LUFILE *stream)
+{ if (stream->is_handle && stream->herr) return 1;
+ else return 0;
+}
+
+long int luftell(LUFILE *stream)
+{ if (stream->is_handle && stream->canseek) return SetFilePointer(stream->h,0,NULL,FILE_CURRENT)-stream->initial_offset;
+ else if (stream->is_handle) return 0;
+ else return stream->pos;
+}
+
+int lufseek(LUFILE *stream, long offset, int whence)
+{ if (stream->is_handle && stream->canseek)
+ { if (whence==SEEK_SET) SetFilePointer(stream->h,stream->initial_offset+offset,0,FILE_BEGIN);
+ else if (whence==SEEK_CUR) SetFilePointer(stream->h,offset,NULL,FILE_CURRENT);
+ else if (whence==SEEK_END) SetFilePointer(stream->h,offset,NULL,FILE_END);
+ else return 19; // EINVAL
+ return 0;
+ }
+ else if (stream->is_handle) return 29; // ESPIPE
+ else
+ { if (whence==SEEK_SET) stream->pos=offset;
+ else if (whence==SEEK_CUR) stream->pos+=offset;
+ else if (whence==SEEK_END) stream->pos=stream->len+offset;
+ return 0;
+ }
+}
+
+
+size_t lufread(void *ptr,size_t size,size_t n,LUFILE *stream)
+{ unsigned int toread = (unsigned int)(size*n);
+ if (stream->is_handle)
+ { DWORD red; BOOL res = ReadFile(stream->h,ptr,toread,&red,NULL);
+ if (!res) stream->herr=true;
+ return red/size;
+ }
+ if (stream->pos+toread > stream->len) toread = stream->len-stream->pos;
+ memcpy(ptr, (char*)stream->buf + stream->pos, toread); DWORD red = toread;
+ stream->pos += red;
+ return red/size;
+}
+
+
+
+
+// file_in_zip_read_info_s contain internal information about a file in zipfile,
+// when reading and decompress it
+typedef struct
+{
+ char *read_buffer; // internal buffer for compressed data
+ z_stream stream; // zLib stream structure for inflate
+
+ uLong pos_in_zipfile; // position in byte on the zipfile, for fseek
+ uLong stream_initialised; // flag set if stream structure is initialised
+
+ uLong offset_local_extrafield;// offset of the local extra field
+ uInt size_local_extrafield;// size of the local extra field
+ uLong pos_local_extrafield; // position in the local extra field in read
+
+ uLong crc32; // crc32 of all data uncompressed
+ uLong crc32_wait; // crc32 we must obtain after decompress all
+ uLong rest_read_compressed; // number of byte to be decompressed
+ uLong rest_read_uncompressed;//number of byte to be obtained after decomp
+ LUFILE* file; // io structore of the zipfile
+ uLong compression_method; // compression method (0==store)
+ uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx)
+} file_in_zip_read_info_s;
+
+
+// unz_s contain internal information about the zipfile
+typedef struct
+{
+ LUFILE* file; // io structore of the zipfile
+ unz_global_info gi; // public global information
+ uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx)
+ uLong num_file; // number of the current file in the zipfile
+ uLong pos_in_central_dir; // pos of the current file in the central dir
+ uLong current_file_ok; // flag about the usability of the current file
+ uLong central_pos; // position of the beginning of the central dir
+
+ uLong size_central_dir; // size of the central directory
+ uLong offset_central_dir; // offset of start of central directory with respect to the starting disk number
+
+ unz_file_info cur_file_info; // public info about the current file in zip
+ unz_file_info_internal cur_file_info_internal; // private info about it
+ file_in_zip_read_info_s* pfile_in_zip_read; // structure about the current file if we are decompressing it
+} unz_s, *unzFile;
+
+
+int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity);
+// Compare two filename (fileName1,fileName2).
+
+z_off_t unztell (unzFile file);
+// Give the current position in uncompressed data
+
+int unzeof (unzFile file);
+// return 1 if the end of file was reached, 0 elsewhere
+
+int unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len);
+// Read extra field from the current file (opened by unzOpenCurrentFile)
+// This is the local-header version of the extra field (sometimes, there is
+// more info in the local-header version than in the central-header)
+//
+// if buf==NULL, it return the size of the local extra field
+//
+// if buf!=NULL, len is the size of the buffer, the extra header is copied in
+// buf.
+// the return value is the number of bytes copied in buf, or (if <0)
+// the error code
+
+
+
+// ===========================================================================
+// Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+// for end of file.
+// IN assertion: the stream s has been sucessfully opened for reading.
+
+int unzlocal_getByte(LUFILE *fin,int *pi)
+{ unsigned char c;
+ int err = (int)lufread(&c, 1, 1, fin);
+ if (err==1)
+ { *pi = (int)c;
+ return UNZ_OK;
+ }
+ else
+ { if (luferror(fin)) return UNZ_ERRNO;
+ else return UNZ_EOF;
+ }
+}
+
+
+// ===========================================================================
+// Reads a long in LSB order from the given gz_stream. Sets
+int unzlocal_getShort (LUFILE *fin,uLong *pX)
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = unzlocal_getByte(fin,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(fin,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+int unzlocal_getLong (LUFILE *fin,uLong *pX)
+{
+ uLong x ;
+ int i;
+ int err;
+
+ err = unzlocal_getByte(fin,&i);
+ x = (uLong)i;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(fin,&i);
+ x += ((uLong)i)<<8;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(fin,&i);
+ x += ((uLong)i)<<16;
+
+ if (err==UNZ_OK)
+ err = unzlocal_getByte(fin,&i);
+ x += ((uLong)i)<<24;
+
+ if (err==UNZ_OK)
+ *pX = x;
+ else
+ *pX = 0;
+ return err;
+}
+
+
+// My own strcmpi / strcasecmp
+int strcmpcasenosensitive_internal (const char* fileName1,const char *fileName2)
+{
+ for (;;)
+ {
+ char c1=*(fileName1++);
+ char c2=*(fileName2++);
+ if ((c1>='a') && (c1<='z'))
+ c1 -= (char)0x20;
+ if ((c2>='a') && (c2<='z'))
+ c2 -= (char)0x20;
+ if (c1=='\0')
+ return ((c2=='\0') ? 0 : -1);
+ if (c2=='\0')
+ return 1;
+ if (c1<c2)
+ return -1;
+ if (c1>c2)
+ return 1;
+ }
+}
+
+
+
+
+//
+// Compare two filename (fileName1,fileName2).
+// If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+// If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi or strcasecmp)
+//
+int unzStringFileNameCompare (const char*fileName1,const char*fileName2,int iCaseSensitivity)
+{ if (iCaseSensitivity==1) return strcmp(fileName1,fileName2);
+ else return strcmpcasenosensitive_internal(fileName1,fileName2);
+}
+
+#define BUFREADCOMMENT (0x400)
+
+
+// Locate the Central directory of a zipfile (at the end, just before
+// the global comment)
+uLong unzlocal_SearchCentralDir(LUFILE *fin)
+{ if (lufseek(fin,0,SEEK_END) != 0) return 0;
+ uLong uSizeFile = luftell(fin);
+
+ uLong uMaxBack=0xffff; // maximum size of global comment
+ if (uMaxBack>uSizeFile) uMaxBack = uSizeFile;
+
+ unsigned char *buf = (unsigned char*)zmalloc(BUFREADCOMMENT+4);
+ if (buf==NULL) return 0;
+ uLong uPosFound=0;
+
+ uLong uBackRead = 4;
+ while (uBackRead<uMaxBack)
+ { uLong uReadSize,uReadPos ;
+ int i;
+ if (uBackRead+BUFREADCOMMENT>uMaxBack) uBackRead = uMaxBack;
+ else uBackRead+=BUFREADCOMMENT;
+ uReadPos = uSizeFile-uBackRead ;
+ uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);
+ if (lufseek(fin,uReadPos,SEEK_SET)!=0) break;
+ if (lufread(buf,(uInt)uReadSize,1,fin)!=1) break;
+ for (i=(int)uReadSize-3; (i--)>0;)
+ { if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))
+ { uPosFound = uReadPos+i; break;
+ }
+ }
+ if (uPosFound!=0) break;
+ }
+ if (buf) zfree(buf);
+ return uPosFound;
+}
+
+
+int unzGoToFirstFile (unzFile file);
+int unzCloseCurrentFile (unzFile file);
+
+// Open a Zip file.
+// If the zipfile cannot be opened (file don't exist or in not valid), return NULL.
+// Otherwise, the return value is a unzFile Handle, usable with other unzip functions
+unzFile unzOpenInternal(LUFILE *fin)
+{
+ zopenerror = ZR_OK; //+++1.2
+ if (fin==NULL) { zopenerror = ZR_ARGS; return NULL; } //+++1.2
+ if (unz_copyright[0]!=' ') {lufclose(fin); zopenerror = ZR_CORRUPT; return NULL; } //+++1.2
+
+ int err=UNZ_OK;
+ unz_s us;
+ uLong central_pos,uL;
+ central_pos = unzlocal_SearchCentralDir(fin);
+ if (central_pos==0) err=UNZ_ERRNO;
+ if (lufseek(fin,central_pos,SEEK_SET)!=0) err=UNZ_ERRNO;
+ // the signature, already checked
+ if (unzlocal_getLong(fin,&uL)!=UNZ_OK) err=UNZ_ERRNO;
+ // number of this disk
+ uLong number_disk; // number of the current dist, used for spanning ZIP, unsupported, always 0
+ if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) err=UNZ_ERRNO;
+ // number of the disk with the start of the central directory
+ uLong number_disk_with_CD; // number the the disk with central dir, used for spaning ZIP, unsupported, always 0
+ if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) err=UNZ_ERRNO;
+ // total number of entries in the central dir on this disk
+ if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) err=UNZ_ERRNO;
+ // total number of entries in the central dir
+ uLong number_entry_CD; // total number of entries in the central dir (same than number_entry on nospan)
+ if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) err=UNZ_ERRNO;
+ if ((number_entry_CD!=us.gi.number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) err=UNZ_BADZIPFILE;
+ // size of the central directory
+ if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) err=UNZ_ERRNO;
+ // offset of start of central directory with respect to the starting disk number
+ if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) err=UNZ_ERRNO;
+ // zipfile comment length
+ if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) err=UNZ_ERRNO;
+ if ((central_pos+fin->initial_offset<us.offset_central_dir+us.size_central_dir) && (err==UNZ_OK)) err=UNZ_BADZIPFILE;
+ //if (err!=UNZ_OK) {lufclose(fin);return NULL;}
+ if (err!=UNZ_OK) {lufclose(fin); zopenerror = err; return NULL;} //+++1.2
+
+ us.file=fin;
+ us.byte_before_the_zipfile = central_pos+fin->initial_offset - (us.offset_central_dir+us.size_central_dir);
+ us.central_pos = central_pos;
+ us.pfile_in_zip_read = NULL;
+ fin->initial_offset = 0; // since the zipfile itself is expected to handle this
+
+ unz_s *s = (unz_s*)zmalloc(sizeof(unz_s));
+ *s=us;
+ unzGoToFirstFile((unzFile)s);
+ return (unzFile)s;
+}
+
+
+
+// Close a ZipFile opened with unzipOpen.
+// If there is files inside the .Zip opened with unzipOpenCurrentFile (see later),
+// these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+// return UNZ_OK if there is no problem.
+int unzClose (unzFile file)
+{
+ unz_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+
+ if (s->pfile_in_zip_read!=NULL)
+ unzCloseCurrentFile(file);
+
+ lufclose(s->file);
+ if (s) zfree(s); // unused s=0;
+ return UNZ_OK;
+}
+
+
+// Write info about the ZipFile in the *pglobal_info structure.
+// No preparation of the structure is needed
+// return UNZ_OK if there is no problem.
+int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info)
+{
+ unz_s* s;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ *pglobal_info=s->gi;
+ return UNZ_OK;
+}
+
+
+// Translate date/time from Dos format to tm_unz (readable more easilty)
+void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm)
+{
+ uLong uDate;
+ uDate = (uLong)(ulDosDate>>16);
+ ptm->tm_mday = (uInt)(uDate&0x1f) ;
+ ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ;
+ ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;
+
+ ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);
+ ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ;
+ ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ;
+}
+
+// Get Info about the current file in the zipfile, with internal only info
+int unzlocal_GetCurrentFileInfoInternal (unzFile file,
+ unz_file_info *pfile_info,
+ unz_file_info_internal
+ *pfile_info_internal,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize);
+
+int unzlocal_GetCurrentFileInfoInternal (unzFile file, unz_file_info *pfile_info,
+ unz_file_info_internal *pfile_info_internal, char *szFileName,
+ uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize,
+ char *szComment, uLong commentBufferSize)
+{
+ unz_s* s;
+ unz_file_info file_info;
+ unz_file_info_internal file_info_internal;
+ int err=UNZ_OK;
+ uLong uMagic;
+ long lSeek=0;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (lufseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0)
+ err=UNZ_ERRNO;
+
+
+ // we check the magic
+ if (err==UNZ_OK)
+ if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x02014b50)
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);
+
+ if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ lSeek+=file_info.size_filename;
+ if ((err==UNZ_OK) && (szFileName!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_filename<fileNameBufferSize)
+ {
+ *(szFileName+file_info.size_filename)='\0';
+ uSizeRead = file_info.size_filename;
+ }
+ else
+ uSizeRead = fileNameBufferSize;
+
+ if ((file_info.size_filename>0) && (fileNameBufferSize>0))
+ if (lufread(szFileName,(uInt)uSizeRead,1,s->file)!=1)
+ err=UNZ_ERRNO;
+ lSeek -= uSizeRead;
+ }
+
+
+ if ((err==UNZ_OK) && (extraField!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_file_extra<extraFieldBufferSize)
+ uSizeRead = file_info.size_file_extra;
+ else
+ uSizeRead = extraFieldBufferSize;
+
+ if (lSeek!=0)
+ if (lufseek(s->file,lSeek,SEEK_CUR)==0)
+ lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))
+ if (lufread(extraField,(uInt)uSizeRead,1,s->file)!=1)
+ err=UNZ_ERRNO;
+ lSeek += file_info.size_file_extra - uSizeRead;
+ }
+ else
+ lSeek+=file_info.size_file_extra;
+
+
+ if ((err==UNZ_OK) && (szComment!=NULL))
+ {
+ uLong uSizeRead ;
+ if (file_info.size_file_comment<commentBufferSize)
+ {
+ *(szComment+file_info.size_file_comment)='\0';
+ uSizeRead = file_info.size_file_comment;
+ }
+ else
+ uSizeRead = commentBufferSize;
+
+ if (lSeek!=0)
+ if (lufseek(s->file,lSeek,SEEK_CUR)==0)
+ {} // unused lSeek=0;
+ else
+ err=UNZ_ERRNO;
+ if ((file_info.size_file_comment>0) && (commentBufferSize>0))
+ if (lufread(szComment,(uInt)uSizeRead,1,s->file)!=1)
+ err=UNZ_ERRNO;
+ //unused lSeek+=file_info.size_file_comment - uSizeRead;
+ }
+ else {} //unused lSeek+=file_info.size_file_comment;
+
+ if ((err==UNZ_OK) && (pfile_info!=NULL))
+ *pfile_info=file_info;
+
+ if ((err==UNZ_OK) && (pfile_info_internal!=NULL))
+ *pfile_info_internal=file_info_internal;
+
+ return err;
+}
+
+
+
+// Write info about the ZipFile in the *pglobal_info structure.
+// No preparation of the structure is needed
+// return UNZ_OK if there is no problem.
+int unzGetCurrentFileInfo (unzFile file, unz_file_info *pfile_info,
+ char *szFileName, uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize,
+ char *szComment, uLong commentBufferSize)
+{ return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,szFileName,fileNameBufferSize,
+ extraField,extraFieldBufferSize, szComment,commentBufferSize);
+}
+
+
+// Set the current file of the zipfile to the first file.
+// return UNZ_OK if there is no problem
+int unzGoToFirstFile (unzFile file)
+{
+ int err;
+ unz_s* s;
+ if (file==NULL) return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ s->pos_in_central_dir=s->offset_central_dir;
+ s->num_file=0;
+ err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+
+// Set the current file of the zipfile to the next file.
+// return UNZ_OK if there is no problem
+// return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+int unzGoToNextFile (unzFile file)
+{
+ unz_s* s;
+ int err;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+ if (s->num_file+1==s->gi.number_entry)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +
+ s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;
+ s->num_file++;
+ err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+ &s->cur_file_info_internal,
+ NULL,0,NULL,0,NULL,0);
+ s->current_file_ok = (err == UNZ_OK);
+ return err;
+}
+
+
+// Try locate the file szFileName in the zipfile.
+// For the iCaseSensitivity signification, see unzStringFileNameCompare
+// return value :
+// UNZ_OK if the file is found. It becomes the current file.
+// UNZ_END_OF_LIST_OF_FILE if the file is not found
+int unzLocateFile (unzFile file, const TCHAR *szFileName, int iCaseSensitivity)
+{
+ unz_s* s;
+ int err;
+
+ uLong num_fileSaved;
+ uLong pos_in_central_dirSaved;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+
+ if (_tcslen(szFileName)>=UNZ_MAXFILENAMEINZIP)
+ return UNZ_PARAMERROR;
+
+ char szFileNameA[MAX_PATH];
+
+#ifdef _UNICODE
+ GetAnsiFileName(szFileName, szFileNameA, MAX_PATH-1);
+#else
+ strcpy(szFileNameA, szFileName);
+#endif
+
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_END_OF_LIST_OF_FILE;
+
+ num_fileSaved = s->num_file;
+ pos_in_central_dirSaved = s->pos_in_central_dir;
+
+ err = unzGoToFirstFile(file);
+
+ while (err == UNZ_OK)
+ {
+ char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];
+ unzGetCurrentFileInfo(file,NULL,
+ szCurrentFileName,sizeof(szCurrentFileName)-1,
+ NULL,0,NULL,0);
+ if (unzStringFileNameCompare(szCurrentFileName,szFileNameA,iCaseSensitivity)==0)
+ return UNZ_OK;
+ err = unzGoToNextFile(file);
+ }
+
+ s->num_file = num_fileSaved ;
+ s->pos_in_central_dir = pos_in_central_dirSaved ;
+ return err;
+}
+
+
+// Read the local header of the current zipfile
+// Check the coherency of the local header and info in the end of central
+// directory about this file
+// store in *piSizeVar the size of extra info in local header
+// (filename and size of extra field data)
+int unzlocal_CheckCurrentFileCoherencyHeader (unz_s *s,uInt *piSizeVar,
+ uLong *poffset_local_extrafield, uInt *psize_local_extrafield)
+{
+ uLong uMagic,uData,uFlags;
+ uLong size_filename;
+ uLong size_extra_field;
+ int err=UNZ_OK;
+
+ *piSizeVar = 0;
+ *poffset_local_extrafield = 0;
+ *psize_local_extrafield = 0;
+
+ if (lufseek(s->file,s->cur_file_info_internal.offset_curfile + s->byte_before_the_zipfile,SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+
+ if (err==UNZ_OK)
+ if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if (uMagic!=0x04034b50)
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getShort(s->file,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+// else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))
+// err=UNZ_BADZIPFILE;
+ if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK)
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getShort(s->file,&uData) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))
+ err=UNZ_BADZIPFILE;
+
+ if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&
+ (s->cur_file_info.compression_method!=Z_DEFLATED))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // date/time
+ err=UNZ_ERRNO;
+
+ if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // crc
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size compr
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+ if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size uncompr
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) &&
+ ((uFlags & 8)==0))
+ err=UNZ_BADZIPFILE;
+
+
+ if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK)
+ err=UNZ_ERRNO;
+ else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))
+ err=UNZ_BADZIPFILE;
+
+ *piSizeVar += (uInt)size_filename;
+
+ if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK)
+ err=UNZ_ERRNO;
+ *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +
+ SIZEZIPLOCALHEADER + size_filename;
+ *psize_local_extrafield = (uInt)size_extra_field;
+
+ *piSizeVar += (uInt)size_extra_field;
+
+ return err;
+}
+
+
+
+
+
+// Open for reading data the current file in the zipfile.
+// If there is no error and the file is opened, the return value is UNZ_OK.
+int unzOpenCurrentFile (unzFile file)
+{
+ int err;
+ int Store;
+ uInt iSizeVar;
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ uLong offset_local_extrafield; // offset of the local extra field
+ uInt size_local_extrafield; // size of the local extra field
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ if (!s->current_file_ok)
+ return UNZ_PARAMERROR;
+
+ if (s->pfile_in_zip_read != NULL)
+ unzCloseCurrentFile(file);
+
+ if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar,
+ &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)
+ return UNZ_BADZIPFILE;
+
+ pfile_in_zip_read_info = (file_in_zip_read_info_s*)zmalloc(sizeof(file_in_zip_read_info_s));
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_INTERNALERROR;
+
+ pfile_in_zip_read_info->read_buffer=(char*)zmalloc(UNZ_BUFSIZE);
+ pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;
+ pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;
+ pfile_in_zip_read_info->pos_local_extrafield=0;
+
+ if (pfile_in_zip_read_info->read_buffer==NULL)
+ {
+ if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); //unused pfile_in_zip_read_info=0;
+ return UNZ_INTERNALERROR;
+ }
+
+ pfile_in_zip_read_info->stream_initialised=0;
+
+ if ((s->cur_file_info.compression_method!=0) && (s->cur_file_info.compression_method!=Z_DEFLATED))
+ { // unused err=UNZ_BADZIPFILE;
+ }
+ Store = s->cur_file_info.compression_method==0;
+
+ pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;
+ pfile_in_zip_read_info->crc32=0;
+ pfile_in_zip_read_info->compression_method =
+ s->cur_file_info.compression_method;
+ pfile_in_zip_read_info->file=s->file;
+ pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;
+
+ pfile_in_zip_read_info->stream.total_out = 0;
+
+ if (!Store)
+ {
+ pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;
+ pfile_in_zip_read_info->stream.zfree = (free_func)0;
+ pfile_in_zip_read_info->stream.opaque = (voidpf)0;
+
+ err=inflateInit2(&pfile_in_zip_read_info->stream);
+ if (err == Z_OK)
+ pfile_in_zip_read_info->stream_initialised=1;
+ // windowBits is passed < 0 to tell that there is no zlib header.
+ // Note that in this case inflate *requires* an extra "dummy" byte
+ // after the compressed stream in order to complete decompression and
+ // return Z_STREAM_END.
+ // In unzip, i don't wait absolutely Z_STREAM_END because I known the
+ // size of both compressed and uncompressed data
+ }
+ pfile_in_zip_read_info->rest_read_compressed =
+ s->cur_file_info.compressed_size ;
+ pfile_in_zip_read_info->rest_read_uncompressed =
+ s->cur_file_info.uncompressed_size ;
+
+
+ pfile_in_zip_read_info->pos_in_zipfile =
+ s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER +
+ iSizeVar;
+
+ pfile_in_zip_read_info->stream.avail_in = (uInt)0;
+
+
+ s->pfile_in_zip_read = pfile_in_zip_read_info;
+ return UNZ_OK;
+}
+
+
+// Read bytes from the current file.
+// buf contain buffer where data must be copied
+// len the size of buf.
+// return the number of byte copied if somes bytes are copied
+// return 0 if the end of file was reached
+// return <0 with error code if there is an error
+// (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+int unzReadCurrentFile (unzFile file, voidp buf, unsigned len)
+{ int err=UNZ_OK;
+ uInt iRead = 0;
+
+ unz_s *s = (unz_s*)file;
+ if (s==NULL) return UNZ_PARAMERROR;
+
+ file_in_zip_read_info_s* pfile_in_zip_read_info = s->pfile_in_zip_read;
+ if (pfile_in_zip_read_info==NULL) return UNZ_PARAMERROR;
+ if ((pfile_in_zip_read_info->read_buffer == NULL)) return UNZ_END_OF_LIST_OF_FILE;
+ if (len==0) return 0;
+
+ pfile_in_zip_read_info->stream.next_out = (Byte*)buf;
+ pfile_in_zip_read_info->stream.avail_out = (uInt)len;
+
+ if (len>pfile_in_zip_read_info->rest_read_uncompressed)
+ { pfile_in_zip_read_info->stream.avail_out = (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
+ }
+
+ while (pfile_in_zip_read_info->stream.avail_out>0)
+ { if ((pfile_in_zip_read_info->stream.avail_in==0) && (pfile_in_zip_read_info->rest_read_compressed>0))
+ { uInt uReadThis = UNZ_BUFSIZE;
+ if (pfile_in_zip_read_info->rest_read_compressed<uReadThis) uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;
+ if (uReadThis == 0) return UNZ_EOF;
+ if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->pos_in_zipfile + pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) return UNZ_ERRNO;
+ if (lufread(pfile_in_zip_read_info->read_buffer,uReadThis,1,pfile_in_zip_read_info->file)!=1) return UNZ_ERRNO;
+ pfile_in_zip_read_info->pos_in_zipfile += uReadThis;
+ pfile_in_zip_read_info->rest_read_compressed-=uReadThis;
+ pfile_in_zip_read_info->stream.next_in = (Byte*)pfile_in_zip_read_info->read_buffer;
+ pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;
+ }
+
+ if (pfile_in_zip_read_info->compression_method==0)
+ { uInt uDoCopy,i ;
+ if (pfile_in_zip_read_info->stream.avail_out < pfile_in_zip_read_info->stream.avail_in)
+ { uDoCopy = pfile_in_zip_read_info->stream.avail_out ;
+ }
+ else
+ { uDoCopy = pfile_in_zip_read_info->stream.avail_in ;
+ }
+ for (i=0;i<uDoCopy;i++)
+ { *(pfile_in_zip_read_info->stream.next_out+i) = *(pfile_in_zip_read_info->stream.next_in+i);
+ }
+ pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,pfile_in_zip_read_info->stream.next_out,uDoCopy);
+ pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;
+ pfile_in_zip_read_info->stream.avail_in -= uDoCopy;
+ pfile_in_zip_read_info->stream.avail_out -= uDoCopy;
+ pfile_in_zip_read_info->stream.next_out += uDoCopy;
+ pfile_in_zip_read_info->stream.next_in += uDoCopy;
+ pfile_in_zip_read_info->stream.total_out += uDoCopy;
+ iRead += uDoCopy;
+ }
+ else
+ { uLong uTotalOutBefore,uTotalOutAfter;
+ const Byte *bufBefore;
+ uLong uOutThis;
+ int flush=Z_SYNC_FLUSH;
+ uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;
+ bufBefore = pfile_in_zip_read_info->stream.next_out;
+ err=inflate(&pfile_in_zip_read_info->stream,flush);
+ uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
+ uOutThis = uTotalOutAfter-uTotalOutBefore;
+ pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,bufBefore,(uInt)(uOutThis));
+ pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis;
+ iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);
+ if (err==Z_STREAM_END) return (iRead==0) ? UNZ_EOF : iRead; //+++1.3
+ //if (err==Z_STREAM_END) return (iRead==len) ? UNZ_EOF : iRead; //+++1.2
+
+ if (err != Z_OK) break;
+ }
+ }
+
+ if (err==Z_OK) return iRead;
+
+ return iRead;
+}
+
+
+// Give the current position in uncompressed data
+z_off_t unztell (unzFile file)
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ return (z_off_t)pfile_in_zip_read_info->stream.total_out;
+}
+
+
+// return 1 if the end of file was reached, 0 elsewhere
+int unzeof (unzFile file)
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
+ return 1;
+ else
+ return 0;
+}
+
+
+
+// Read extra field from the current file (opened by unzOpenCurrentFile)
+// This is the local-header version of the extra field (sometimes, there is
+// more info in the local-header version than in the central-header)
+// if buf==NULL, it return the size of the local extra field that can be read
+// if buf!=NULL, len is the size of the buffer, the extra header is copied in buf.
+// the return value is the number of bytes copied in buf, or (if <0) the error code
+int unzGetLocalExtrafield (unzFile file,voidp buf,unsigned len)
+{
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ uInt read_now;
+ uLong size_to_read;
+
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+ size_to_read = (pfile_in_zip_read_info->size_local_extrafield -
+ pfile_in_zip_read_info->pos_local_extrafield);
+
+ if (buf==NULL)
+ return (int)size_to_read;
+
+ if (len>size_to_read)
+ read_now = (uInt)size_to_read;
+ else
+ read_now = (uInt)len ;
+
+ if (read_now==0)
+ return 0;
+
+ if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->offset_local_extrafield + pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0)
+ return UNZ_ERRNO;
+
+ if (lufread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1)
+ return UNZ_ERRNO;
+
+ return (int)read_now;
+}
+
+// Close the file in zip opened with unzipOpenCurrentFile
+// Return UNZ_CRCERROR if all the file was read but the CRC is not good
+int unzCloseCurrentFile (unzFile file)
+{
+ int err=UNZ_OK;
+
+ unz_s* s;
+ file_in_zip_read_info_s* pfile_in_zip_read_info;
+ if (file==NULL)
+ return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ pfile_in_zip_read_info=s->pfile_in_zip_read;
+
+ if (pfile_in_zip_read_info==NULL)
+ return UNZ_PARAMERROR;
+
+
+ if (pfile_in_zip_read_info->rest_read_uncompressed == 0)
+ {
+ if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)
+ err=UNZ_CRCERROR;
+ }
+
+
+ if (pfile_in_zip_read_info->read_buffer!=0)
+ { void *buf = pfile_in_zip_read_info->read_buffer;
+ zfree(buf);
+ pfile_in_zip_read_info->read_buffer=0;
+ }
+ pfile_in_zip_read_info->read_buffer = NULL;
+ if (pfile_in_zip_read_info->stream_initialised)
+ inflateEnd(&pfile_in_zip_read_info->stream);
+
+ pfile_in_zip_read_info->stream_initialised = 0;
+ if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); // unused pfile_in_zip_read_info=0;
+
+ s->pfile_in_zip_read=NULL;
+
+ return err;
+}
+
+
+// Get the global comment string of the ZipFile, in the szComment buffer.
+// uSizeBuf is the size of the szComment buffer.
+// return the number of byte copied or an error code <0
+int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf)
+{ //int err=UNZ_OK;
+ unz_s* s;
+ uLong uReadThis ;
+ if (file==NULL) return UNZ_PARAMERROR;
+ s=(unz_s*)file;
+ uReadThis = uSizeBuf;
+ if (uReadThis>s->gi.size_comment) uReadThis = s->gi.size_comment;
+ if (lufseek(s->file,s->central_pos+22,SEEK_SET)!=0) return UNZ_ERRNO;
+ if (uReadThis>0)
+ { *szComment='\0';
+ if (lufread(szComment,(uInt)uReadThis,1,s->file)!=1) return UNZ_ERRNO;
+ }
+ if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) *(szComment+s->gi.size_comment)='\0';
+ return (int)uReadThis;
+}
+
+
+
+
+
+int unzOpenCurrentFile (unzFile file);
+int unzReadCurrentFile (unzFile file, void *buf, unsigned len);
+int unzCloseCurrentFile (unzFile file);
+
+
+FILETIME timet2filetime(time_t timer)
+{
+ struct tm *tm = gmtime(&timer);
+ SYSTEMTIME st;
+ st.wYear = (WORD)(tm->tm_year+1900);
+ st.wMonth = (WORD)(tm->tm_mon+1);
+ st.wDay = (WORD)(tm->tm_mday);
+ st.wHour = (WORD)(tm->tm_hour);
+ st.wMinute = (WORD)(tm->tm_min);
+ st.wSecond = (WORD)(tm->tm_sec);
+ st.wMilliseconds=0;
+ FILETIME ft;
+ SystemTimeToFileTime(&st,&ft);
+ return ft;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+class TUnzip
+{ public:
+ TUnzip() : uf(0), currentfile(-1), czei(-1) {}
+
+ unzFile uf; int currentfile; ZIPENTRY cze; int czei;
+ TCHAR rootdir[MAX_PATH];
+
+ ZRESULT Open(void *z,unsigned int len,DWORD flags);
+ ZRESULT Get(int index,ZIPENTRY *ze);
+ ZRESULT Find(const TCHAR *name,bool ic,int *index,ZIPENTRY *ze);
+ ZRESULT Unzip(int index,void *dst,unsigned int len,DWORD flags);
+ ZRESULT Close();
+};
+
+
+ZRESULT TUnzip::Open(void *z,unsigned int len,DWORD flags)
+{
+ if (uf!=0 || currentfile!=-1)
+ return ZR_NOTINITED;
+ GetCurrentDirectory(MAX_PATH,rootdir);
+ _tcscat(rootdir,_T("\\"));
+ if (flags==ZIP_HANDLE)
+ {
+ DWORD type = GetFileType(z);
+ if (type!=FILE_TYPE_DISK)
+ return ZR_SEEK;
+ }
+ ZRESULT e;
+ LUFILE *f = lufopen(z,len,flags,&e);
+ if (f==NULL)
+ return e;
+ uf = unzOpenInternal(f);
+ //return ZR_OK;
+ return zopenerror; //+++1.2
+}
+
+ZRESULT TUnzip::Get(int index,ZIPENTRY *ze)
+{ if (index<-1 || index>=(int)uf->gi.number_entry)
+ return ZR_ARGS;
+ if (currentfile!=-1)
+ unzCloseCurrentFile(uf);
+ currentfile=-1;
+ if (index==czei && index!=-1) {memcpy(ze,&cze,sizeof(ZIPENTRY)); return ZR_OK;}
+ if (index==-1)
+ { ze->index = uf->gi.number_entry;
+ ze->name[0]=0;
+ ze->attr=0;
+ ze->atime.dwLowDateTime=0; ze->atime.dwHighDateTime=0;
+ ze->ctime.dwLowDateTime=0; ze->ctime.dwHighDateTime=0;
+ ze->mtime.dwLowDateTime=0; ze->mtime.dwHighDateTime=0;
+ ze->comp_size=0;
+ ze->unc_size=0;
+ return ZR_OK;
+ }
+ if (index<(int)uf->num_file) unzGoToFirstFile(uf);
+ while ((int)uf->num_file<index) unzGoToNextFile(uf);
+ unz_file_info ufi;
+ char fn[MAX_PATH];
+ unzGetCurrentFileInfo(uf,&ufi,fn,MAX_PATH,NULL,0,NULL,0);
+
+ // now get the extra header. We do this ourselves, instead of
+ // calling unzOpenCurrentFile &c., to avoid allocating more than necessary.
+ unsigned int extralen,iSizeVar; unsigned long offset;
+ int res = unzlocal_CheckCurrentFileCoherencyHeader(uf,&iSizeVar,&offset,&extralen);
+ if (res!=UNZ_OK) return ZR_CORRUPT;
+ if (lufseek(uf->file,offset,SEEK_SET)!=0) return ZR_READ;
+ char *extra = new char[extralen];
+ if (lufread(extra,1,(uInt)extralen,uf->file)!=extralen) {delete[] extra; return ZR_READ;}
+ //
+ ze->index=uf->num_file;
+ strcpy(ze->name,fn);
+ // zip has an 'attribute' 32bit value. Its lower half is windows stuff
+ // its upper half is standard unix attr.
+ unsigned long a = ufi.external_fa;
+ bool uisdir = (a&0x40000000)!=0;
+ //bool uwriteable= (a&0x08000000)!=0;
+ bool uwriteable= (a&0x00800000)!=0; // ***hd***
+ //bool ureadable= (a&0x01000000)!=0;
+ //bool uexecutable=(a&0x00400000)!=0;
+ bool wreadonly= (a&0x00000001)!=0;
+ bool whidden= (a&0x00000002)!=0;
+ bool wsystem= (a&0x00000004)!=0;
+ bool wisdir= (a&0x00000010)!=0;
+ bool warchive= (a&0x00000020)!=0;
+ ze->attr=FILE_ATTRIBUTE_NORMAL;
+ if (uisdir || wisdir) ze->attr |= FILE_ATTRIBUTE_DIRECTORY;
+ if (warchive) ze->attr|=FILE_ATTRIBUTE_ARCHIVE;
+ if (whidden) ze->attr|=FILE_ATTRIBUTE_HIDDEN;
+ if (!uwriteable||wreadonly) ze->attr|=FILE_ATTRIBUTE_READONLY;
+ if (wsystem) ze->attr|=FILE_ATTRIBUTE_SYSTEM;
+ ze->comp_size = ufi.compressed_size;
+ ze->unc_size = ufi.uncompressed_size;
+ //
+ WORD dostime = (WORD)(ufi.dosDate&0xFFFF);
+ WORD dosdate = (WORD)((ufi.dosDate>>16)&0xFFFF);
+ FILETIME ft;
+ DosDateTimeToFileTime(dosdate,dostime,&ft);
+ ze->atime=ft; ze->ctime=ft; ze->mtime=ft;
+ // the zip will always have at least that dostime. But if it also has
+ // an extra header, then we'll instead get the info from that.
+ unsigned int epos=0;
+ while (epos+4<extralen)
+ { char etype[3]; etype[0]=extra[epos+0]; etype[1]=extra[epos+1]; etype[2]=0;
+ int size = extra[epos+2];
+ if (strcmp(etype,"UT")!=0) {epos += 4+size; continue;}
+ int flags = extra[epos+4];
+ bool hasmtime = (flags&1)!=0;
+ bool hasatime = (flags&2)!=0;
+ bool hasctime = (flags&4)!=0;
+ epos+=5;
+ if (hasmtime)
+ { time_t mtime = *(time_t*)(extra+epos); epos+=4;
+ ze->mtime = timet2filetime(mtime);
+ }
+ if (hasatime)
+ { time_t atime = *(time_t*)(extra+epos); epos+=4;
+ ze->atime = timet2filetime(atime);
+ }
+ if (hasctime)
+ { time_t ctime = *(time_t*)(extra+epos);
+ ze->ctime = timet2filetime(ctime);
+ }
+ break;
+ }
+ //
+ if (extra!=0) delete[] extra;
+ memcpy(&cze,ze,sizeof(ZIPENTRY)); czei=index;
+ return ZR_OK;
+}
+
+ZRESULT TUnzip::Find(const TCHAR *name, bool ic, int *index, ZIPENTRY *ze)
+{
+ int res = unzLocateFile(uf,name,ic?CASE_INSENSITIVE:CASE_SENSITIVE);
+ if (res!=UNZ_OK)
+ {
+ if (index!=0)
+ *index=-1;
+ if (ze!=NULL)
+ {
+ ZeroMemory(ze,sizeof(ZIPENTRY)); ze->index=-1;
+ }
+ return ZR_NOTFOUND;
+ }
+ if (currentfile!=-1)
+ unzCloseCurrentFile(uf); currentfile=-1;
+ int i = (int)uf->num_file;
+ if (index!=NULL)
+ *index=i;
+ if (ze!=NULL)
+ {
+ ZRESULT zres = Get(i,ze);
+ if (zres!=ZR_OK)
+ return zres;
+ }
+ return ZR_OK;
+}
+
+void EnsureDirectory(const TCHAR *rootdir, const TCHAR *dir)
+{
+ if (dir==NULL || dir[0] == _T('\0'))
+ return;
+ const TCHAR *lastslash = dir, *c = lastslash;
+ while (*c != _T('\0'))
+ {
+ if (*c==_T('/') || *c==_T('\\'))
+ lastslash=c;
+ c++;
+ }
+ const TCHAR *name=lastslash;
+ if (lastslash!=dir)
+ {
+ TCHAR tmp[MAX_PATH];
+ _tcsncpy(tmp, dir, lastslash-dir);
+ tmp[lastslash-dir] = _T('\0');
+ EnsureDirectory(rootdir,tmp);
+ name++;
+ }
+ TCHAR cd[MAX_PATH];
+ _tcscpy(cd,rootdir);
+ //_tcscat(cd,name);
+ _tcscat(cd,dir); //+++1.2
+ CreateDirectory(cd,NULL);
+}
+
+ZRESULT TUnzip::Unzip(int index,void *dst,unsigned int len,DWORD flags)
+{
+ if (flags!=ZIP_MEMORY && flags!=ZIP_FILENAME && flags!=ZIP_HANDLE)
+ return ZR_ARGS;
+ if (flags==ZIP_MEMORY)
+ {
+ if (index!=currentfile)
+ {
+ if (currentfile!=-1)
+ unzCloseCurrentFile(uf);
+ currentfile=-1;
+ if (index>=(int)uf->gi.number_entry)
+ return ZR_ARGS;
+ if (index<(int)uf->num_file)
+ unzGoToFirstFile(uf);
+ while ((int)uf->num_file<index)
+ unzGoToNextFile(uf);
+ unzOpenCurrentFile(uf);
+ currentfile=index;
+ }
+ int res = unzReadCurrentFile(uf,dst,len);
+ if (res>0)
+ return ZR_MORE;
+ unzCloseCurrentFile(uf);
+ currentfile=-1;
+ if (res==0)
+ return ZR_OK;
+ else
+ return ZR_FLATE;
+ }
+
+ // otherwise we're writing to a handle or a file
+ if (currentfile!=-1)
+ unzCloseCurrentFile(uf);
+ currentfile=-1;
+ if (index >= (int)uf->gi.number_entry)
+ return ZR_ARGS;
+ if (index < (int)uf->num_file)
+ unzGoToFirstFile(uf);
+ while ((int)uf->num_file<index)
+ unzGoToNextFile(uf);
+ ZIPENTRY ze;
+ Get(index,&ze);
+
+ // zipentry=directory is handled specially
+ if ((ze.attr & FILE_ATTRIBUTE_DIRECTORY) != 0)
+ {
+ if (flags==ZIP_HANDLE)
+ return ZR_OK; // don't do anything
+#ifdef _UNICODE
+ TCHAR uname[MAX_PATH];
+ GetUnicodeFileName(ze.name, uname, MAX_PATH-1);
+ EnsureDirectory(rootdir, uname);
+#else
+ EnsureDirectory(rootdir, ze.name);
+#endif
+ return ZR_OK;
+ }
+
+ // otherwise, we write the zipentry to a file/handle
+ HANDLE h;
+ if (flags==ZIP_HANDLE)
+ h=dst;
+ else
+ {
+ const TCHAR *name = (const TCHAR *)dst;
+ const TCHAR *c = name;
+ while (*c)
+ {
+ if (*c == _T('/') || *c == _T('\\'))
+ name = c + 1;
+ c++;
+ }
+ // if it's a relative filename, ensure directories. We do this as a service
+ // to the caller so they can just unzip straight unto ze.name.
+ if (name != (const TCHAR *)dst)
+ {
+ TCHAR dir[MAX_PATH];
+ _tcscpy(dir,(const TCHAR*)dst);
+ dir[name-(const TCHAR*)dst-1] = _T('\0');
+ bool isabsolute = (dir[0]==_T('/') || dir[0]==_T('\\') || dir[1]==_T(':'));
+ isabsolute |= (_tcsstr(dir,_T("../"))!=0) | (_tcsstr(dir,_T("..\\"))!=0);
+ if (!isabsolute)
+ EnsureDirectory(rootdir,dir);
+ }
+ h = ::CreateFile((const TCHAR*)dst, GENERIC_WRITE, 0, NULL, CREATE_ALWAYS,
+ ze.attr, NULL);
+ }
+
+ if (h == INVALID_HANDLE_VALUE)
+ return ZR_NOFILE;
+
+ unzOpenCurrentFile(uf);
+ BYTE buf[16384];
+ bool haderr=false;
+
+ for (;;)
+ {
+ int res = unzReadCurrentFile(uf,buf,16384);
+ if (res<0)
+ {
+ haderr=true;
+ break;
+ }
+ if (res==0)
+ break;
+ DWORD writ;
+ BOOL bres = WriteFile(h,buf,res,&writ,NULL);
+ if (!bres)
+ {
+ haderr=true;
+ break;
+ }
+ }
+ bool settime=false;
+ DWORD type = GetFileType(h);
+ if (type==FILE_TYPE_DISK && !haderr)
+ settime=true;
+ if (settime)
+ SetFileTime(h,&ze.ctime,&ze.atime,&ze.mtime);
+ if (flags!=ZIP_HANDLE)
+ CloseHandle(h);
+ unzCloseCurrentFile(uf);
+ if (haderr)
+ return ZR_WRITE;
+ return ZR_OK;
+}
+
+ZRESULT TUnzip::Close()
+{ if (currentfile!=-1) unzCloseCurrentFile(uf); currentfile=-1;
+ if (uf!=0) unzClose(uf); uf=0;
+ return ZR_OK;
+}
+
+
+
+
+
+ZRESULT lasterrorU=ZR_OK;
+
+unsigned int FormatZipMessageU(ZRESULT code, char *buf,unsigned int len)
+{ if (code==ZR_RECENT) code=lasterrorU;
+ const char *msg="unknown zip result code";
+ switch (code)
+ { case ZR_OK: msg="Success"; break;
+ case ZR_NODUPH: msg="Culdn't duplicate handle"; break;
+ case ZR_NOFILE: msg="Couldn't create/open file"; break;
+ case ZR_NOALLOC: msg="Failed to allocate memory"; break;
+ case ZR_WRITE: msg="Error writing to file"; break;
+ case ZR_NOTFOUND: msg="File not found in the zipfile"; break;
+ case ZR_MORE: msg="Still more data to unzip"; break;
+ case ZR_CORRUPT: msg="Zipfile is corrupt or not a zipfile"; break;
+ case ZR_READ: msg="Error reading file"; break;
+ case ZR_ARGS: msg="Caller: faulty arguments"; break;
+ case ZR_PARTIALUNZ: msg="Caller: the file had already been partially unzipped"; break;
+ case ZR_NOTMMAP: msg="Caller: can only get memory of a memory zipfile"; break;
+ case ZR_MEMSIZE: msg="Caller: not enough space allocated for memory zipfile"; break;
+ case ZR_FAILED: msg="Caller: there was a previous error"; break;
+ case ZR_ENDED: msg="Caller: additions to the zip have already been ended"; break;
+ case ZR_ZMODE: msg="Caller: mixing creation and opening of zip"; break;
+ case ZR_NOTINITED: msg="Zip-bug: internal initialisation not completed"; break;
+ case ZR_SEEK: msg="Zip-bug: trying to seek the unseekable"; break;
+ case ZR_MISSIZE: msg="Zip-bug: the anticipated size turned out wrong"; break;
+ case ZR_NOCHANGE: msg="Zip-bug: tried to change mind, but not allowed"; break;
+ case ZR_FLATE: msg="Zip-bug: an internal error during flation"; break;
+ }
+ unsigned int mlen=(unsigned int)strlen(msg);
+ if (buf==0 || len==0) return mlen;
+ unsigned int n=mlen; if (n+1>len) n=len-1;
+ strncpy(buf,msg,n); buf[n]=0;
+ return mlen;
+}
+
+
+typedef struct
+{ DWORD flag;
+ TUnzip *unz;
+} TUnzipHandleData;
+
+HZIP OpenZipU(void *z,unsigned int len,DWORD flags)
+{
+ TUnzip *unz = new TUnzip();
+ lasterrorU = unz->Open(z,len,flags);
+ if (lasterrorU!=ZR_OK)
+ {
+ delete unz;
+ return 0;
+ }
+ TUnzipHandleData *han = new TUnzipHandleData;
+ han->flag=1;
+ han->unz=unz;
+ return (HZIP)han;
+}
+
+ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze)
+{
+ if (hz==0)
+ {
+ lasterrorU=ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1)
+ {
+ lasterrorU=ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TUnzip *unz = han->unz;
+ lasterrorU = unz->Get(index,ze);
+ return lasterrorU;
+}
+
+ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *zew)
+{
+ if (hz==0)
+ {
+ lasterrorU=ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1)
+ {
+ lasterrorU=ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TUnzip *unz = han->unz;
+ ZIPENTRY ze;
+ lasterrorU = unz->Get(index,&ze);
+ if (lasterrorU == ZR_OK)
+ {
+ zew->index = ze.index;
+ zew->attr = ze.attr;
+ zew->atime = ze.atime;
+ zew->ctime = ze.ctime;
+ zew->mtime = ze.mtime;
+ zew->comp_size = ze.comp_size;
+ zew->unc_size = ze.unc_size;
+#ifdef _UNICODE
+ GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1);
+#else
+ strcpy(zew->name, ze.name);
+#endif
+ }
+ return lasterrorU;
+}
+
+ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze)
+{
+ if (hz==0)
+ {
+ lasterrorU=ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1)
+ {
+ lasterrorU=ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TUnzip *unz = han->unz;
+ lasterrorU = unz->Find(name,ic,index,ze);
+ return lasterrorU;
+}
+
+ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *zew)
+{
+ if (hz==0)
+ {
+ lasterrorU=ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1)
+ {
+ lasterrorU=ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TUnzip *unz = han->unz;
+ ZIPENTRY ze;
+ lasterrorU = unz->Find(name,ic,index,&ze);
+ if (lasterrorU == ZR_OK)
+ {
+ zew->index = ze.index;
+ zew->attr = ze.attr;
+ zew->atime = ze.atime;
+ zew->ctime = ze.ctime;
+ zew->mtime = ze.mtime;
+ zew->comp_size = ze.comp_size;
+ zew->unc_size = ze.unc_size;
+#ifdef _UNICODE
+ GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1);
+#else
+ strcpy(zew->name, ze.name);
+#endif
+ }
+
+ return lasterrorU;
+}
+
+ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags)
+{
+ if (hz==0)
+ {
+ lasterrorU=ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1)
+ {
+ lasterrorU=ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TUnzip *unz = han->unz;
+ lasterrorU = unz->Unzip(index,dst,len,flags);
+ return lasterrorU;
+}
+
+ZRESULT CloseZipU(HZIP hz)
+{ if (hz==0) {lasterrorU=ZR_ARGS;return ZR_ARGS;}
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ if (han->flag!=1) {lasterrorU=ZR_ZMODE;return ZR_ZMODE;}
+ TUnzip *unz = han->unz;
+ lasterrorU = unz->Close();
+ delete unz;
+ delete han;
+ return lasterrorU;
+}
+
+bool IsZipHandleU(HZIP hz)
+{ if (hz==0) return true;
+ TUnzipHandleData *han = (TUnzipHandleData*)hz;
+ return (han->flag==1);
+}
+
+
diff --git a/src/Common/XUnzip.h b/src/Common/XUnzip.h
new file mode 100644
index 00000000..573dc7d8
--- /dev/null
+++ b/src/Common/XUnzip.h
@@ -0,0 +1,382 @@
+// XUnzip.h Version 1.3
+//
+// Authors: Mark Adler et al. (see below)
+//
+// Modified by: Lucian Wischik
+// lu@wischik.com
+//
+// Version 1.0 - Turned C files into just a single CPP file
+// - Made them compile cleanly as C++ files
+// - Gave them simpler APIs
+// - Added the ability to zip/unzip directly in memory without
+// any intermediate files
+//
+// Modified by: Hans Dietrich
+// hdietrich@gmail.com
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Lucian Wischik's comments:
+// --------------------------
+// THIS FILE is almost entirely based upon code by info-zip.
+// It has been modified by Lucian Wischik.
+// The original code may be found at http://www.info-zip.org
+// The original copyright text follows.
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Original authors' comments:
+// ---------------------------
+// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
+// definitive version of this document should be available at
+// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
+//
+// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
+//
+// For the purposes of this copyright and license, "Info-ZIP" is defined as
+// the following set of individuals:
+//
+// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
+// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
+// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
+// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
+// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
+// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
+// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
+//
+// This software is provided "as is", without warranty of any kind, express
+// or implied. In no event shall Info-ZIP or its contributors be held liable
+// for any direct, indirect, incidental, special or consequential damages
+// arising out of the use of or inability to use this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// definition, disclaimer, and this list of conditions.
+//
+// 2. Redistributions in binary form (compiled executables) must reproduce
+// the above copyright notice, definition, disclaimer, and this list of
+// conditions in documentation and/or other materials provided with the
+// distribution. The sole exception to this condition is redistribution
+// of a standard UnZipSFX binary as part of a self-extracting archive;
+// that is permitted without inclusion of this license, as long as the
+// normal UnZipSFX banner has not been removed from the binary or disabled.
+//
+// 3. Altered versions--including, but not limited to, ports to new
+// operating systems, existing ports with new graphical interfaces, and
+// dynamic, shared, or static library versions--must be plainly marked
+// as such and must not be misrepresented as being the original source.
+// Such altered versions also must not be misrepresented as being
+// Info-ZIP releases--including, but not limited to, labeling of the
+// altered versions with the names "Info-ZIP" (or any variation thereof,
+// including, but not limited to, different capitalizations),
+// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
+// Info-ZIP. Such altered versions are further prohibited from
+// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
+// of the Info-ZIP URL(s).
+//
+// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
+// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
+// own source and binary releases.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef XUNZIP_H
+#define XUNZIP_H
+
+
+#ifndef XZIP_H
+DECLARE_HANDLE(HZIP); // An HZIP identifies a zip file that has been opened
+#endif
+
+typedef DWORD ZRESULT;
+// return codes from any of the zip functions. Listed later.
+
+#define ZIP_HANDLE 1
+#define ZIP_FILENAME 2
+#define ZIP_MEMORY 3
+
+typedef struct
+{ int index; // index of this file within the zip
+ char name[MAX_PATH]; // filename within the zip
+ DWORD attr; // attributes, as in GetFileAttributes.
+ FILETIME atime,ctime,mtime;// access, create, modify filetimes
+ long comp_size; // sizes of item, compressed and uncompressed. These
+ long unc_size; // may be -1 if not yet known (e.g. being streamed in)
+} ZIPENTRY;
+
+typedef struct
+{ int index; // index of this file within the zip
+ TCHAR name[MAX_PATH]; // filename within the zip
+ DWORD attr; // attributes, as in GetFileAttributes.
+ FILETIME atime,ctime,mtime;// access, create, modify filetimes
+ long comp_size; // sizes of item, compressed and uncompressed. These
+ long unc_size; // may be -1 if not yet known (e.g. being streamed in)
+} ZIPENTRYW;
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// OpenZip()
+//
+// Purpose: Open an existing zip archive file
+//
+// Parameters: z - archive file name if flags is ZIP_FILENAME; for other
+// uses see below
+// len - for memory (ZIP_MEMORY) should be the buffer size;
+// for other uses, should be 0
+// flags - indicates usage, see below; for files, this will be
+// ZIP_FILENAME
+//
+// Returns: HZIP - non-zero if zip archive opened ok, otherwise 0
+//
+HZIP OpenZip(void *z, unsigned int len, DWORD flags);
+// OpenZip - opens a zip file and returns a handle with which you can
+// subsequently examine its contents. You can open a zip file from:
+// from a pipe: OpenZip(hpipe_read,0, ZIP_HANDLE);
+// from a file (by handle): OpenZip(hfile,0, ZIP_HANDLE);
+// from a file (by name): OpenZip("c:\\test.zip",0, ZIP_FILENAME);
+// from a memory block: OpenZip(bufstart, buflen, ZIP_MEMORY);
+// If the file is opened through a pipe, then items may only be
+// accessed in increasing order, and an item may only be unzipped once,
+// although GetZipItem can be called immediately before and after unzipping
+// it. If it's opened i n any other way, then full random access is possible.
+// Note: pipe input is not yet implemented.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// GetZipItem()
+//
+// Purpose: Get information about an item in an open zip archive
+//
+// Parameters: hz - handle of open zip archive
+// index - index number (0 based) of item in zip
+// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct
+// (if Unicode)
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+
+#ifdef _UNICODE
+#define GetZipItem GetZipItemW
+#else
+#define GetZipItem GetZipItemA
+#endif
+
+ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze);
+ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *ze);
+// GetZipItem - call this to get information about an item in the zip.
+// If index is -1 and the file wasn't opened through a pipe,
+// then it returns information about the whole zipfile
+// (and in particular ze.index returns the number of index items).
+// Note: the item might be a directory (ze.attr & FILE_ATTRIBUTE_DIRECTORY)
+// See below for notes on what happens when you unzip such an item.
+// Note: if you are opening the zip through a pipe, then random access
+// is not possible and GetZipItem(-1) fails and you can't discover the number
+// of items except by calling GetZipItem on each one of them in turn,
+// starting at 0, until eventually the call fails. Also, in the event that
+// you are opening through a pipe and the zip was itself created into a pipe,
+// then then comp_size and sometimes unc_size as well may not be known until
+// after the item has been unzipped.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// FindZipItem()
+//
+// Purpose: Find item by name and return information about it
+//
+// Parameters: hz - handle of open zip archive
+// name - name of file to look for inside zip archive
+// ic - TRUE = case insensitive
+// index - pointer to index number returned, or -1
+// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct
+// (if Unicode)
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+
+#ifdef _UNICODE
+#define FindZipItem FindZipItemW
+#else
+#define FindZipItem FindZipItemA
+#endif
+
+ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze);
+ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *ze);
+// FindZipItem - finds an item by name. ic means 'insensitive to case'.
+// It returns the index of the item, and returns information about it.
+// If nothing was found, then index is set to -1 and the function returns
+// an error code.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// UnzipItem()
+//
+// Purpose: Find item by index and unzip it
+//
+// Parameters: hz - handle of open zip archive
+// index - index number of file to unzip
+// dst - target file name of unzipped file
+// len - for memory (ZIP_MEMORY. length of buffer;
+// otherwise 0
+// flags - indicates usage, see below; for files, this will be
+// ZIP_FILENAME
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+
+ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags);
+// UnzipItem - given an index to an item, unzips it. You can unzip to:
+// to a pipe: UnzipItem(hz,i, hpipe_write,0,ZIP_HANDLE);
+// to a file (by handle): UnzipItem(hz,i, hfile,0,ZIP_HANDLE);
+// to a file (by name): UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);
+// to a memory block: UnzipItem(hz,i, buf,buflen,ZIP_MEMORY);
+// In the final case, if the buffer isn't large enough to hold it all,
+// then the return code indicates that more is yet to come. If it was
+// large enough, and you want to know precisely how big, GetZipItem.
+// Note: zip files are normally stored with relative pathnames. If you
+// unzip with ZIP_FILENAME a relative pathname then the item gets created
+// relative to the current directory - it first ensures that all necessary
+// subdirectories have been created. Also, the item may itself be a directory.
+// If you unzip a directory with ZIP_FILENAME, then the directory gets created.
+// If you unzip it to a handle or a memory block, then nothing gets created
+// and it emits 0 bytes.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// CloseZip()
+//
+// Purpose: Close an open zip archive
+//
+// Parameters: hz - handle to an open zip archive
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+ZRESULT CloseZip(HZIP hz);
+// CloseZip - the zip handle must be closed with this function.
+
+unsigned int FormatZipMessage(ZRESULT code, char *buf,unsigned int len);
+// FormatZipMessage - given an error code, formats it as a string.
+// It returns the length of the error message. If buf/len points
+// to a real buffer, then it also writes as much as possible into there.
+
+
+// These are the result codes:
+#define ZR_OK 0x00000000 // nb. the pseudo-code zr-recent is never returned,
+#define ZR_RECENT 0x00000001 // but can be passed to FormatZipMessage.
+// The following come from general system stuff (e.g. files not openable)
+#define ZR_GENMASK 0x0000FF00
+#define ZR_NODUPH 0x00000100 // couldn't duplicate the handle
+#define ZR_NOFILE 0x00000200 // couldn't create/open the file
+#define ZR_NOALLOC 0x00000300 // failed to allocate some resource
+#define ZR_WRITE 0x00000400 // a general error writing to the file
+#define ZR_NOTFOUND 0x00000500 // couldn't find that file in the zip
+#define ZR_MORE 0x00000600 // there's still more data to be unzipped
+#define ZR_CORRUPT 0x00000700 // the zipfile is corrupt or not a zipfile
+#define ZR_READ 0x00000800 // a general error reading the file
+// The following come from mistakes on the part of the caller
+#define ZR_CALLERMASK 0x00FF0000
+#define ZR_ARGS 0x00010000 // general mistake with the arguments
+#define ZR_NOTMMAP 0x00020000 // tried to ZipGetMemory, but that only works on mmap zipfiles, which yours wasn't
+#define ZR_MEMSIZE 0x00030000 // the memory size is too small
+#define ZR_FAILED 0x00040000 // the thing was already failed when you called this function
+#define ZR_ENDED 0x00050000 // the zip creation has already been closed
+#define ZR_MISSIZE 0x00060000 // the indicated input file size turned out mistaken
+#define ZR_PARTIALUNZ 0x00070000 // the file had already been partially unzipped
+#define ZR_ZMODE 0x00080000 // tried to mix creating/opening a zip
+// The following come from bugs within the zip library itself
+#define ZR_BUGMASK 0xFF000000
+#define ZR_NOTINITED 0x01000000 // initialisation didn't work
+#define ZR_SEEK 0x02000000 // trying to seek in an unseekable file
+#define ZR_NOCHANGE 0x04000000 // changed its mind on storage, but not allowed
+#define ZR_FLATE 0x05000000 // an internal error in the de/inflation code
+
+
+
+
+
+// e.g.
+//
+// SetCurrentDirectory("c:\\docs\\stuff");
+// HZIP hz = OpenZip("c:\\stuff.zip",0,ZIP_FILENAME);
+// ZIPENTRY ze; GetZipItem(hz,-1,&ze); int numitems=ze.index;
+// for (int i=0; i<numitems; i++)
+// { GetZipItem(hz,i,&ze);
+// UnzipItem(hz,i,ze.name,0,ZIP_FILENAME);
+// }
+// CloseZip(hz);
+//
+//
+// HRSRC hrsrc = FindResource(hInstance,MAKEINTRESOURCE(1),RT_RCDATA);
+// HANDLE hglob = LoadResource(hInstance,hrsrc);
+// void *zipbuf=LockResource(hglob);
+// unsigned int ziplen=SizeofResource(hInstance,hrsrc);
+// HZIP hz = OpenZip(zipbuf, ziplen, ZIP_MEMORY);
+// - unzip to a membuffer -
+// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);
+// char *ibuf = new char[ze.unc_size];
+// UnzipItem(hz,i, ibuf, ze.unc_size,ZIP_MEMORY);
+// delete[] buf;
+// - unzip to a fixed membuff -
+// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);
+// char ibuf[1024]; ZIPRESULT zr=ZR_MORE; unsigned long totsize=0;
+// while (zr==ZR_MORE)
+// { zr = UnzipItem(hz,i, ibuf,1024,ZIP_MEMORY);
+// unsigned long bufsize=1024; if (zr==ZR_OK) bufsize=ze.unc_size-totsize;
+// totsize+=bufsize;
+// }
+// - unzip to a pipe -
+// HANDLE hthread=CreateWavReaderThread(&hread,&hwrite);
+// FindZipItem(hz,"sound.wav",&i,&ze);
+// UnzipItem(hz,i, hwrite,0,ZIP_HANDLE);
+// CloseHandle(hwrite);
+// WaitForSingleObject(hthread,INFINITE);
+// CloseHandle(hread); CloseHandle(hthread);
+// - finished -
+// CloseZip(hz);
+// // note: no need to free resources obtained through Find/Load/LockResource
+//
+//
+// SetCurrentDirectory("c:\\docs\\pipedzipstuff");
+// HANDLE hread,hwrite; CreatePipe(&hread,&hwrite);
+// CreateZipWriterThread(hwrite);
+// HZIP hz = OpenZip(hread,0,ZIP_HANDLE);
+// for (int i=0; ; i++)
+// { ZIPENTRY ze; ZRESULT res = GetZipItem(hz,i,&ze);
+// if (res!=ZE_OK) break; // no more
+// UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);
+// }
+// CloseZip(hz);
+//
+
+
+
+
+// Now we indulge in a little skullduggery so that the code works whether
+// the user has included just zip or both zip and unzip.
+// Idea: if header files for both zip and unzip are present, then presumably
+// the cpp files for zip and unzip are both present, so we will call
+// one or the other of them based on a dynamic choice. If the header file
+// for only one is present, then we will bind to that particular one.
+HZIP OpenZipU(void *z,unsigned int len,DWORD flags);
+ZRESULT CloseZipU(HZIP hz);
+unsigned int FormatZipMessageU(ZRESULT code, char *buf,unsigned int len);
+bool IsZipHandleU(HZIP hz);
+#define OpenZip OpenZipU
+
+#ifdef XZIP_H
+#undef CloseZip
+#define CloseZip(hz) (IsZipHandleU(hz)?CloseZipU(hz):CloseZipZ(hz))
+#else
+#define CloseZip CloseZipU
+#define FormatZipMessage FormatZipMessageU
+#endif
+
+
+#endif //XUNZIP_H
diff --git a/src/Common/XZip.cpp b/src/Common/XZip.cpp
new file mode 100644
index 00000000..1d98d34e
--- /dev/null
+++ b/src/Common/XZip.cpp
@@ -0,0 +1,3209 @@
+// XZip.cpp Version 1.3
+//
+// Authors: Mark Adler et al. (see below)
+//
+// Modified by: Lucian Wischik
+// lu@wischik.com
+//
+// Version 1.0 - Turned C files into just a single CPP file
+// - Made them compile cleanly as C++ files
+// - Gave them simpler APIs
+// - Added the ability to zip/unzip directly in memory without
+// any intermediate files
+//
+// Modified by: Hans Dietrich
+// hdietrich@gmail.com
+//
+// Version 1.3: - Fixed UTC problem
+//
+// Version 1.2: - Many bug fixes. See CodeProject article for list.
+//
+// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()
+// - Changed file names to avoid conflicts with Lucian's files
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Lucian Wischik's comments:
+// --------------------------
+// THIS FILE is almost entirely based upon code by Info-ZIP.
+// It has been modified by Lucian Wischik.
+// The original code may be found at http://www.info-zip.org
+// The original copyright text follows.
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Original authors' comments:
+// ---------------------------
+// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
+// definitive version of this document should be available at
+// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
+//
+// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
+//
+// For the purposes of this copyright and license, "Info-ZIP" is defined as
+// the following set of individuals:
+//
+// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
+// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
+// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
+// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
+// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
+// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
+// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
+//
+// This software is provided "as is", without warranty of any kind, express
+// or implied. In no event shall Info-ZIP or its contributors be held liable
+// for any direct, indirect, incidental, special or consequential damages
+// arising out of the use of or inability to use this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// definition, disclaimer, and this list of conditions.
+//
+// 2. Redistributions in binary form (compiled executables) must reproduce
+// the above copyright notice, definition, disclaimer, and this list of
+// conditions in documentation and/or other materials provided with the
+// distribution. The sole exception to this condition is redistribution
+// of a standard UnZipSFX binary as part of a self-extracting archive;
+// that is permitted without inclusion of this license, as long as the
+// normal UnZipSFX banner has not been removed from the binary or disabled.
+//
+// 3. Altered versions--including, but not limited to, ports to new
+// operating systems, existing ports with new graphical interfaces, and
+// dynamic, shared, or static library versions--must be plainly marked
+// as such and must not be misrepresented as being the original source.
+// Such altered versions also must not be misrepresented as being
+// Info-ZIP releases--including, but not limited to, labeling of the
+// altered versions with the names "Info-ZIP" (or any variation thereof,
+// including, but not limited to, different capitalizations),
+// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
+// Info-ZIP. Such altered versions are further prohibited from
+// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
+// of the Info-ZIP URL(s).
+//
+// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
+// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
+// own source and binary releases.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#define _USE_32BIT_TIME_T //+++1.2
+
+
+#define STRICT
+#define WIN32_LEAN_AND_MEAN
+#include <windows.h>
+#include <tchar.h>
+#include <time.h>
+#include "xzip.h"
+
+#pragma warning(disable : 4996) // disable bogus deprecation warning
+
+typedef unsigned char uch; // unsigned 8-bit value
+typedef unsigned short ush; // unsigned 16-bit value
+typedef unsigned long ulg; // unsigned 32-bit value
+typedef size_t extent; // file size
+typedef unsigned Pos; // must be at least 32 bits
+typedef unsigned IPos; // A Pos is an index in the character window. Pos is used only for parameter passing
+
+#ifndef EOF
+#define EOF (-1)
+#endif
+
+
+// Error return values. The values 0..4 and 12..18 follow the conventions
+// of PKZIP. The values 4..10 are all assigned to "insufficient memory"
+// by PKZIP, so the codes 5..10 are used here for other purposes.
+#define ZE_MISS -1 // used by procname(), zipbare()
+#define ZE_OK 0 // success
+#define ZE_EOF 2 // unexpected end of zip file
+#define ZE_FORM 3 // zip file structure error
+#define ZE_MEM 4 // out of memory
+#define ZE_LOGIC 5 // internal logic error
+#define ZE_BIG 6 // entry too large to split
+#define ZE_NOTE 7 // invalid comment format
+#define ZE_TEST 8 // zip test (-T) failed or out of memory
+#define ZE_ABORT 9 // user interrupt or termination
+#define ZE_TEMP 10 // error using a temp file
+#define ZE_READ 11 // read or seek error
+#define ZE_NONE 12 // nothing to do
+#define ZE_NAME 13 // missing or empty zip file
+#define ZE_WRITE 14 // error writing to a file
+#define ZE_CREAT 15 // couldn't open to write
+#define ZE_PARMS 16 // bad command line
+#define ZE_OPEN 18 // could not open a specified file to read
+#define ZE_MAXERR 18 // the highest error number
+
+
+// internal file attribute
+#define UNKNOWN (-1)
+#define BINARY 0
+#define ASCII 1
+
+#define BEST -1 // Use best method (deflation or store)
+#define STORE 0 // Store method
+#define DEFLATE 8 // Deflation method
+
+#define CRCVAL_INITIAL 0L
+
+// MSDOS file or directory attributes
+#define MSDOS_HIDDEN_ATTR 0x02
+#define MSDOS_DIR_ATTR 0x10
+
+// Lengths of headers after signatures in bytes
+#define LOCHEAD 26
+#define CENHEAD 42
+#define ENDHEAD 18
+
+// Definitions for extra field handling:
+#define EB_HEADSIZE 4 /* length of a extra field block header */
+#define EB_LEN 2 /* offset of data length field in header */
+#define EB_UT_MINLEN 1 /* minimal UT field contains Flags byte */
+#define EB_UT_FLAGS 0 /* byte offset of Flags field */
+#define EB_UT_TIME1 1 /* byte offset of 1st time value */
+#define EB_UT_FL_MTIME (1 << 0) /* mtime present */
+#define EB_UT_FL_ATIME (1 << 1) /* atime present */
+#define EB_UT_FL_CTIME (1 << 2) /* ctime present */
+#define EB_UT_LEN(n) (EB_UT_MINLEN + 4 * (n))
+#define EB_L_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(3))
+#define EB_C_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(1))
+
+
+// Macros for writing machine integers to little-endian format
+#define PUTSH(a,f) {char _putsh_c=(char)((a)&0xff); wfunc(param,&_putsh_c,1); _putsh_c=(char)((a)>>8); wfunc(param,&_putsh_c,1);}
+#define PUTLG(a,f) {PUTSH((a) & 0xffff,(f)) PUTSH((a) >> 16,(f))}
+
+
+// -- Structure of a ZIP file --
+// Signatures for zip file information headers
+#define LOCSIG 0x04034b50L
+#define CENSIG 0x02014b50L
+#define ENDSIG 0x06054b50L
+#define EXTLOCSIG 0x08074b50L
+
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+// The minimum and maximum match lengths
+
+
+#define WSIZE (0x8000)
+// Maximum window size = 32K. If you are really short of memory, compile
+// with a smaller WSIZE but this reduces the compression ratio for files
+// of size > WSIZE. WSIZE must be a power of two in the current implementation.
+//
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+// Minimum amount of lookahead, except at the end of the input file.
+// See deflate.c for comments about the MIN_MATCH+1.
+//
+
+#define MAX_DIST (WSIZE-MIN_LOOKAHEAD)
+// In order to simplify the code, particularly on 16 bit machines, match
+// distances are limited to MAX_DIST instead of WSIZE.
+//
+
+
+
+
+
+// ===========================================================================
+// Constants
+//
+
+#define MAX_BITS 15
+// All codes must not exceed MAX_BITS bits
+
+#define MAX_BL_BITS 7
+// Bit length codes must not exceed MAX_BL_BITS bits
+
+#define LENGTH_CODES 29
+// number of length codes, not counting the special END_BLOCK code
+
+#define LITERALS 256
+// number of literal bytes 0..255
+
+#define END_BLOCK 256
+// end of block literal code
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+// number of Literal or Length codes, including the END_BLOCK code
+
+#define D_CODES 30
+// number of distance codes
+
+#define BL_CODES 19
+// number of codes used to transfer the bit lengths
+
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+// The three kinds of block type
+
+#define LIT_BUFSIZE 0x8000
+#define DIST_BUFSIZE LIT_BUFSIZE
+// Sizes of match buffers for literals/lengths and distances. There are
+// 4 reasons for limiting LIT_BUFSIZE to 64K:
+// - frequencies can be kept in 16 bit counters
+// - if compression is not successful for the first block, all input data is
+// still in the window so we can still emit a stored block even when input
+// comes from standard input. (This can also be done for all blocks if
+// LIT_BUFSIZE is not greater than 32K.)
+// - if compression is not successful for a file smaller than 64K, we can
+// even emit a stored file instead of a stored block (saving 5 bytes).
+// - creating new Huffman trees less frequently may not provide fast
+// adaptation to changes in the input data statistics. (Take for
+// example a binary file with poorly compressible code followed by
+// a highly compressible string table.) Smaller buffer sizes give
+// fast adaptation but have of course the overhead of transmitting trees
+// more frequently.
+// - I can't count above 4
+// The current code is general and allows DIST_BUFSIZE < LIT_BUFSIZE (to save
+// memory at the expense of compression). Some optimizations would be possible
+// if we rely on DIST_BUFSIZE == LIT_BUFSIZE.
+//
+
+#define REP_3_6 16
+// repeat previous bit length 3-6 times (2 bits of repeat count)
+
+#define REPZ_3_10 17
+// repeat a zero length 3-10 times (3 bits of repeat count)
+
+#define REPZ_11_138 18
+// repeat a zero length 11-138 times (7 bits of repeat count)
+
+#define HEAP_SIZE (2*L_CODES+1)
+// maximum heap size
+
+
+// ===========================================================================
+// Local data used by the "bit string" routines.
+//
+
+#define Buf_size (8 * 2*sizeof(char))
+// Number of bits used within bi_buf. (bi_buf may be implemented on
+// more than 16 bits on some systems.)
+
+// Output a 16 bit value to the bit stream, lower (oldest) byte first
+#if 0 // -----------------------------------------------------------
+#define PUTSHORT(state,w) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size-1) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+#define PUTSHORT(state,w) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size-1) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ if (state.bs.out_offset < state.bs.out_size-1) \
+ { \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \
+ }\
+}
+
+#if 0 // -----------------------------------------------------------
+#define PUTBYTE(state,b) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ state.bs.out_buf[state.bs.out_offset++] = (char) (b); \
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+#define PUTBYTE(state,b) \
+{ \
+ if (state.bs.out_offset >= state.bs.out_size) \
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \
+ if (state.bs.out_offset < state.bs.out_size) \
+ state.bs.out_buf[state.bs.out_offset++] = (char) (b); \
+}
+
+// DEFLATE.CPP HEADER
+
+#define HASH_BITS 15
+// For portability to 16 bit machines, do not use values above 15.
+
+#define HASH_SIZE (unsigned)(1<<HASH_BITS)
+#define HASH_MASK (HASH_SIZE-1)
+#define WMASK (WSIZE-1)
+// HASH_SIZE and WSIZE must be powers of two
+
+#define NIL 0
+// Tail of hash chains
+
+#define FAST 4
+#define SLOW 2
+// speed options for the general purpose bit flag
+
+#define TOO_FAR 4096
+// Matches of length 3 are discarded if their distance exceeds TOO_FAR
+
+
+
+#define EQUAL 0
+// result of memcmp for equal strings
+
+
+// ===========================================================================
+// Local data used by the "longest match" routines.
+
+#define H_SHIFT ((HASH_BITS+MIN_MATCH-1)/MIN_MATCH)
+// Number of bits by which ins_h and del_h must be shifted at each
+// input step. It must be such that after MIN_MATCH steps, the oldest
+// byte no longer takes part in the hash key, that is:
+// H_SHIFT * MIN_MATCH >= HASH_BITS
+
+#define max_insert_length max_lazy_match
+// Insert new strings in the hash table only if the match length
+// is not greater than this length. This saves time but degrades compression.
+// max_insert_length is used only for compression levels <= 3.
+
+
+
+const int extra_lbits[LENGTH_CODES] // extra bits for each length code
+ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+const int extra_dbits[D_CODES] // extra bits for each distance code
+ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+const int extra_blbits[BL_CODES]// extra bits for each bit length code
+ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+const uch bl_order[BL_CODES] = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+// The lengths of the bit length codes are sent in order of decreasing
+// probability, to avoid transmitting the lengths for unused bit length codes.
+
+
+typedef struct config {
+ ush good_length; // reduce lazy search above this match length
+ ush max_lazy; // do not perform lazy search above this match length
+ ush nice_length; // quit search above this match length
+ ush max_chain;
+} config;
+
+// Values for max_lazy_match, good_match, nice_match and max_chain_length,
+// depending on the desired pack level (0..9). The values given below have
+// been tuned to exclude worst case performance for pathological files.
+// Better values may be found for specific files.
+//
+
+const config configuration_table[10] = {
+// good lazy nice chain
+ {0, 0, 0, 0}, // 0 store only
+ {4, 4, 8, 4}, // 1 maximum speed, no lazy matches
+ {4, 5, 16, 8}, // 2
+ {4, 6, 32, 32}, // 3
+ {4, 4, 16, 16}, // 4 lazy matches */
+ {8, 16, 32, 32}, // 5
+ {8, 16, 128, 128}, // 6
+ {8, 32, 128, 256}, // 7
+ {32, 128, 258, 1024}, // 8
+ {32, 258, 258, 4096}};// 9 maximum compression */
+
+// Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+// For deflate_fast() (levels <= 3) good is ignored and lazy has a different meaning.
+
+
+
+
+
+// Data structure describing a single value and its code string.
+typedef struct ct_data {
+ union {
+ ush freq; // frequency count
+ ush code; // bit string
+ } fc;
+ union {
+ ush dad; // father node in Huffman tree
+ ush len; // length of bit string
+ } dl;
+} ct_data;
+
+typedef struct tree_desc
+{
+ ct_data *dyn_tree; // the dynamic tree
+ ct_data *static_tree; // corresponding static tree or NULL
+ const int *extra_bits; // extra bits for each code or NULL
+ int extra_base; // base index for extra_bits
+ int elems; // max number of elements in the tree
+ int max_length; // max bit length for the codes
+ int max_code; // largest code with non zero frequency
+} tree_desc;
+
+
+class TTreeState
+{
+public:
+ TTreeState();
+
+ ct_data dyn_ltree[HEAP_SIZE]; // literal and length tree
+ ct_data dyn_dtree[2*D_CODES+1]; // distance tree
+ ct_data static_ltree[L_CODES+2]; // the static literal tree...
+ // ... Since the bit lengths are imposed, there is no need for the L_CODES
+ // extra codes used during heap construction. However the codes 286 and 287
+ // are needed to build a canonical tree (see ct_init below).
+ ct_data static_dtree[D_CODES]; // the static distance tree...
+ // ... (Actually a trivial tree since all codes use 5 bits.)
+ ct_data bl_tree[2*BL_CODES+1]; // Huffman tree for the bit lengths
+
+ tree_desc l_desc;
+ tree_desc d_desc;
+ tree_desc bl_desc;
+
+ ush bl_count[MAX_BITS+1]; // number of codes at each bit length for an optimal tree
+
+ int heap[2*L_CODES+1]; // heap used to build the Huffman trees
+ int heap_len; // number of elements in the heap
+ int heap_max; // element of largest frequency
+ // The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ // The same heap array is used to build all trees.
+
+ uch depth[2*L_CODES+1];
+ // Depth of each subtree used as tie breaker for trees of equal frequency
+
+ uch length_code[MAX_MATCH-MIN_MATCH+1];
+ // length code for each normalized match length (0 == MIN_MATCH)
+
+ uch dist_code[512];
+ // distance codes. The first 256 values correspond to the distances
+ // 3 .. 258, the last 256 values correspond to the top 8 bits of
+ // the 15 bit distances.
+
+ int base_length[LENGTH_CODES];
+ // First normalized length for each code (0 = MIN_MATCH)
+
+ int base_dist[D_CODES];
+ // First normalized distance for each code (0 = distance of 1)
+
+ uch far l_buf[LIT_BUFSIZE]; // buffer for literals/lengths
+ ush far d_buf[DIST_BUFSIZE]; // buffer for distances
+
+ uch flag_buf[(LIT_BUFSIZE/8)];
+ // flag_buf is a bit array distinguishing literals from lengths in
+ // l_buf, and thus indicating the presence or absence of a distance.
+
+ unsigned last_lit; // running index in l_buf
+ unsigned last_dist; // running index in d_buf
+ unsigned last_flags; // running index in flag_buf
+ uch flags; // current flags not yet saved in flag_buf
+ uch flag_bit; // current bit used in flags
+ // bits are filled in flags starting at bit 0 (least significant).
+ // Note: these flags are overkill in the current code since we don't
+ // take advantage of DIST_BUFSIZE == LIT_BUFSIZE.
+
+ ulg opt_len; // bit length of current block with optimal trees
+ ulg static_len; // bit length of current block with static trees
+
+ ulg cmpr_bytelen; // total byte length of compressed file
+ ulg cmpr_len_bits; // number of bits past 'cmpr_bytelen'
+
+ ulg input_len; // total byte length of input file
+ // input_len is for debugging only since we can get it by other means.
+
+ ush *file_type; // pointer to UNKNOWN, BINARY or ASCII
+// int *file_method; // pointer to DEFLATE or STORE
+};
+
+TTreeState::TTreeState()
+{
+ tree_desc a = {dyn_ltree, static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS, 0}; l_desc = a;
+ tree_desc b = {dyn_dtree, static_dtree, extra_dbits, 0, D_CODES, MAX_BITS, 0}; d_desc = b;
+ tree_desc c = {bl_tree, NULL, extra_blbits, 0, BL_CODES, MAX_BL_BITS, 0}; bl_desc = c;
+ last_lit = 0;
+ last_dist = 0;
+ last_flags = 0;
+
+ memset(dyn_ltree, 0, sizeof(dyn_ltree));
+ memset(dyn_dtree, 0, sizeof(dyn_dtree));
+ memset(static_ltree, 0, sizeof(static_ltree));
+ memset(static_dtree, 0, sizeof(static_dtree));
+ memset(bl_tree, 0, sizeof(bl_tree));
+ memset(bl_count, 0, sizeof(bl_count));
+ memset(heap, 0, sizeof(heap));
+ heap_len = 0;
+ heap_max = 0;
+
+ memset(depth, 0, sizeof(depth));
+ memset(length_code, 0, sizeof(length_code));
+ memset(dist_code, 0, sizeof(dist_code));
+ memset(base_length, 0, sizeof(base_length));
+ memset(base_dist, 0, sizeof(base_dist));
+ memset(l_buf, 0, sizeof(l_buf));
+ memset(d_buf, 0, sizeof(d_buf));
+ memset(flag_buf, 0, sizeof(flag_buf));
+
+ last_lit = 0;
+ last_dist = 0;
+ last_flags = 0;
+ flags = 0;
+ flag_bit = 0;
+ opt_len = 0;
+ static_len = 0;
+ cmpr_bytelen = 0;
+ cmpr_len_bits = 0;
+ input_len = 0;
+ file_type = 0;
+}
+
+class TBitState
+{
+public:
+ TBitState()
+ {
+ flush_flg = 0;
+ bi_buf = 0;
+ bi_valid = 0;
+ out_buf = 0;
+ out_offset = 0;
+ out_size = 0;
+ bits_sent = 0;
+ }
+
+ int flush_flg;
+ //
+ unsigned bi_buf;
+ // Output buffer. bits are inserted starting at the bottom (least significant
+ // bits). The width of bi_buf must be at least 16 bits.
+ int bi_valid;
+ // Number of valid bits in bi_buf. All bits above the last valid bit
+ // are always zero.
+ char *out_buf;
+ // Current output buffer.
+ unsigned out_offset;
+ // Current offset in output buffer.
+ // On 16 bit machines, the buffer is limited to 64K.
+ unsigned out_size;
+ // Size of current output buffer
+ ulg bits_sent; // bit length of the compressed data only needed for debugging???
+};
+
+
+class TDeflateState
+{
+public:
+ TDeflateState()
+ {
+ memset(window, 0, sizeof(window));
+ memset(prev, 0, sizeof(prev));
+ memset(head, 0, sizeof(head));
+ window_size = 0;
+ block_start = 0;
+ sliding = 0;
+ ins_h = 0;
+ prev_length = 0;
+ strstart = 0;
+ match_start = 0;
+ eofile = 0;
+ lookahead = 0;
+ max_chain_length = 0;
+ max_lazy_match = 0;
+ good_match = 0;
+ nice_match = 0;
+ }
+
+ uch window[2L*WSIZE];
+ // Sliding window. Input bytes are read into the second half of the window,
+ // and move to the first half later to keep a dictionary of at least WSIZE
+ // bytes. With this organization, matches are limited to a distance of
+ // WSIZE-MAX_MATCH bytes, but this ensures that IO is always
+ // performed with a length multiple of the block size. Also, it limits
+ // the window size to 64K, which is quite useful on MSDOS.
+ // To do: limit the window size to WSIZE+CBSZ if SMALL_MEM (the code would
+ // be less efficient since the data would have to be copied WSIZE/CBSZ times)
+ Pos prev[WSIZE];
+ // Link to older string with same hash index. To limit the size of this
+ // array to 64K, this link is maintained only for the last 32K strings.
+ // An index in this array is thus a window index modulo 32K.
+ Pos head[HASH_SIZE];
+ // Heads of the hash chains or NIL. If your compiler thinks that
+ // HASH_SIZE is a dynamic value, recompile with -DDYN_ALLOC.
+
+ ulg window_size;
+ // window size, 2*WSIZE except for MMAP or BIG_MEM, where it is the
+ // input file length plus MIN_LOOKAHEAD.
+
+ long block_start;
+ // window position at the beginning of the current output block. Gets
+ // negative when the window is moved backwards.
+
+ int sliding;
+ // Set to false when the input file is already in memory
+
+ unsigned ins_h; // hash index of string to be inserted
+
+ unsigned int prev_length;
+ // Length of the best match at previous step. Matches not greater than this
+ // are discarded. This is used in the lazy match evaluation.
+
+ unsigned strstart; // start of string to insert
+ unsigned match_start; // start of matching string
+ int eofile; // flag set at end of input file
+ unsigned lookahead; // number of valid bytes ahead in window
+
+ unsigned max_chain_length;
+ // To speed up deflation, hash chains are never searched beyond this length.
+ // A higher limit improves compression ratio but degrades the speed.
+
+ unsigned int max_lazy_match;
+ // Attempt to find a better match only when the current match is strictly
+ // smaller than this value. This mechanism is used only for compression
+ // levels >= 4.
+
+ unsigned good_match;
+ // Use a faster search when the previous match is longer than this
+
+ int nice_match; // Stop searching when current match exceeds this
+};
+
+
+typedef struct iztimes {
+ time_t atime,mtime,ctime;
+} iztimes; // access, modify, create times
+
+typedef struct zlist {
+ ush vem, ver, flg, how; // See central header in zipfile.c for what vem..off are
+ ulg tim, crc, siz, len;
+ extent nam, ext, cext, com; // offset of ext must be >= LOCHEAD
+ ush dsk, att, lflg; // offset of lflg must be >= LOCHEAD
+ ulg atx, off;
+ char name[MAX_PATH]; // File name in zip file
+ char *extra; // Extra field (set only if ext != 0)
+ char *cextra; // Extra in central (set only if cext != 0)
+ char *comment; // Comment (set only if com != 0)
+ char iname[MAX_PATH]; // Internal file name after cleanup
+ char zname[MAX_PATH]; // External version of internal name
+ int mark; // Marker for files to operate on
+ int trash; // Marker for files to delete
+ int dosflag; // Set to force MSDOS file attributes
+ struct zlist far *nxt; // Pointer to next header in list
+} TZipFileInfo;
+
+
+class TState;
+typedef unsigned (*READFUNC)(TState &state, char *buf,unsigned size);
+typedef unsigned (*FLUSHFUNC)(void *param, const char *buf, unsigned *size);
+typedef unsigned (*WRITEFUNC)(void *param, const char *buf, unsigned size);
+
+class TState
+{
+public:
+ TState() //+++1.2
+ {
+ param = 0;
+ level = 0;
+ seekable = FALSE;
+ readfunc = 0;
+ flush_outbuf = 0;
+ err = 0;
+ }
+
+ void *param;
+ int level;
+ bool seekable;
+ READFUNC readfunc;
+ FLUSHFUNC flush_outbuf;
+ TTreeState ts;
+ TBitState bs;
+ TDeflateState ds;
+ const char *err;
+};
+
+void Assert(TState &state,bool cond, const char *msg)
+{ if (cond) return;
+ state.err=msg;
+}
+void __cdecl Trace(const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}
+void __cdecl Tracec(bool ,const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}
+
+// ===========================================================================
+// Local (static) routines in this file.
+//
+
+void init_block (TState &);
+void pqdownheap (TState &,ct_data *tree, int k);
+void gen_bitlen (TState &,tree_desc *desc);
+void gen_codes (TState &state,ct_data *tree, int max_code);
+void build_tree (TState &,tree_desc *desc);
+void scan_tree (TState &,ct_data *tree, int max_code);
+void send_tree (TState &state,ct_data *tree, int max_code);
+int build_bl_tree (TState &);
+void send_all_trees (TState &state,int lcodes, int dcodes, int blcodes);
+void compress_block (TState &state,ct_data *ltree, ct_data *dtree);
+void set_file_type (TState &);
+void send_bits (TState &state, int value, int length);
+unsigned bi_reverse (unsigned code, int len);
+void bi_windup (TState &state);
+void copy_block (TState &state,char *buf, unsigned len, int header);
+
+
+#define send_code(state, c, tree) send_bits(state, tree[c].fc.code, tree[c].dl.len)
+// Send a code of the given tree. c and tree must not have side effects
+
+// alternatively...
+//#define send_code(state, c, tree)
+// { if (state.verbose>1) fprintf(stderr,"\ncd %3d ",(c));
+// send_bits(state, tree[c].fc.code, tree[c].dl.len); }
+
+#define d_code(dist) ((dist) < 256 ? state.ts.dist_code[dist] : state.ts.dist_code[256+((dist)>>7)])
+// Mapping from a distance to a distance code. dist is the distance - 1 and
+// must not have side effects. dist_code[256] and dist_code[257] are never used.
+
+#define Max(a,b) (a >= b ? a : b)
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Allocate the match buffer, initialize the various tables and save the
+ * location of the internal file attribute (ascii/binary) and method
+ * (DEFLATE/STORE).
+ */
+void ct_init(TState &state, ush *attr)
+{
+ int n; /* iterates over tree elements */
+ int bits; /* bit counter */
+ int length; /* length value */
+ int code; /* code value */
+ int dist; /* distance index */
+
+ state.ts.file_type = attr;
+ //state.ts.file_method = method;
+ state.ts.cmpr_bytelen = state.ts.cmpr_len_bits = 0L;
+ state.ts.input_len = 0L;
+
+ if (state.ts.static_dtree[0].dl.len != 0) return; /* ct_init already called */
+
+ /* Initialize the mapping length (0..255) -> length code (0..28) */
+ length = 0;
+ for (code = 0; code < LENGTH_CODES-1; code++) {
+ state.ts.base_length[code] = length;
+ for (n = 0; n < (1<<extra_lbits[code]); n++) {
+ state.ts.length_code[length++] = (uch)code;
+ }
+ }
+ Assert(state,length == 256, "ct_init: length != 256");
+ /* Note that the length 255 (match length 258) can be represented
+ * in two different ways: code 284 + 5 bits or code 285, so we
+ * overwrite length_code[255] to use the best encoding:
+ */
+ state.ts.length_code[length-1] = (uch)code;
+
+ /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+ dist = 0;
+ for (code = 0 ; code < 16; code++) {
+ state.ts.base_dist[code] = dist;
+ for (n = 0; n < (1<<extra_dbits[code]); n++) {
+ state.ts.dist_code[dist++] = (uch)code;
+ }
+ }
+ Assert(state,dist == 256, "ct_init: dist != 256");
+ dist >>= 7; /* from now on, all distances are divided by 128 */
+ for ( ; code < D_CODES; code++) {
+ state.ts.base_dist[code] = dist << 7;
+ for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+ state.ts.dist_code[256 + dist++] = (uch)code;
+ }
+ }
+ Assert(state,dist == 256, "ct_init: 256+dist != 512");
+
+ /* Construct the codes of the static literal tree */
+ for (bits = 0; bits <= MAX_BITS; bits++) state.ts.bl_count[bits] = 0;
+ n = 0;
+ while (n <= 143) state.ts.static_ltree[n++].dl.len = 8, state.ts.bl_count[8]++;
+ while (n <= 255) state.ts.static_ltree[n++].dl.len = 9, state.ts.bl_count[9]++;
+ while (n <= 279) state.ts.static_ltree[n++].dl.len = 7, state.ts.bl_count[7]++;
+ while (n <= 287) state.ts.static_ltree[n++].dl.len = 8, state.ts.bl_count[8]++;
+ /* fc.codes 286 and 287 do not exist, but we must include them in the
+ * tree construction to get a canonical Huffman tree (longest code
+ * all ones)
+ */
+ gen_codes(state,(ct_data *)state.ts.static_ltree, L_CODES+1);
+
+ /* The static distance tree is trivial: */
+ for (n = 0; n < D_CODES; n++) {
+ state.ts.static_dtree[n].dl.len = 5;
+ state.ts.static_dtree[n].fc.code = (ush)bi_reverse(n, 5);
+ }
+
+ /* Initialize the first block of the first file: */
+ init_block(state);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+void init_block(TState &state)
+{
+ int n; /* iterates over tree elements */
+
+ /* Initialize the trees. */
+ for (n = 0; n < L_CODES; n++) state.ts.dyn_ltree[n].fc.freq = 0;
+ for (n = 0; n < D_CODES; n++) state.ts.dyn_dtree[n].fc.freq = 0;
+ for (n = 0; n < BL_CODES; n++) state.ts.bl_tree[n].fc.freq = 0;
+
+ state.ts.dyn_ltree[END_BLOCK].fc.freq = 1;
+ state.ts.opt_len = state.ts.static_len = 0L;
+ state.ts.last_lit = state.ts.last_dist = state.ts.last_flags = 0;
+ state.ts.flags = 0; state.ts.flag_bit = 1;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(tree, top) \
+{\
+ top = state.ts.heap[SMALLEST]; \
+ state.ts.heap[SMALLEST] = state.ts.heap[state.ts.heap_len--]; \
+ pqdownheap(state,tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m) \
+ (tree[n].fc.freq < tree[m].fc.freq || \
+ (tree[n].fc.freq == tree[m].fc.freq && state.ts.depth[n] <= state.ts.depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+void pqdownheap(TState &state,ct_data *tree, int k)
+{
+ int v = state.ts.heap[k];
+ int j = k << 1; /* left son of k */
+ int htemp; /* required because of bug in SASC compiler */
+
+ while (j <= state.ts.heap_len) {
+ /* Set j to the smallest of the two sons: */
+ if (j < state.ts.heap_len && smaller(tree, state.ts.heap[j+1], state.ts.heap[j])) j++;
+
+ /* Exit if v is smaller than both sons */
+ htemp = state.ts.heap[j];
+ if (smaller(tree, v, htemp)) break;
+
+ /* Exchange v with the smallest son */
+ state.ts.heap[k] = htemp;
+ k = j;
+
+ /* And continue down the tree, setting j to the left son of k */
+ j <<= 1;
+ }
+ state.ts.heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ * above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ * array bl_count contains the frequencies for each bit length.
+ * The length opt_len is updated; static_len is also updated if stree is
+ * not null.
+ */
+void gen_bitlen(TState &state,tree_desc *desc)
+{
+ ct_data *tree = desc->dyn_tree;
+ const int *extra = desc->extra_bits;
+ int base = desc->extra_base;
+ int max_code = desc->max_code;
+ int max_length = desc->max_length;
+ ct_data *stree = desc->static_tree;
+ int h; /* heap index */
+ int n, m; /* iterate over the tree elements */
+ int bits; /* bit length */
+ int xbits; /* extra bits */
+ ush f; /* frequency */
+ int overflow = 0; /* number of elements with bit length too large */
+
+ for (bits = 0; bits <= MAX_BITS; bits++) state.ts.bl_count[bits] = 0;
+
+ /* In a first pass, compute the optimal bit lengths (which may
+ * overflow in the case of the bit length tree).
+ */
+ tree[state.ts.heap[state.ts.heap_max]].dl.len = 0; /* root of the heap */
+
+ for (h = state.ts.heap_max+1; h < HEAP_SIZE; h++) {
+ n = state.ts.heap[h];
+ bits = tree[tree[n].dl.dad].dl.len + 1;
+ if (bits > max_length) bits = max_length, overflow++;
+ tree[n].dl.len = (ush)bits;
+ /* We overwrite tree[n].dl.dad which is no longer needed */
+
+ if (n > max_code) continue; /* not a leaf node */
+
+ state.ts.bl_count[bits]++;
+ xbits = 0;
+ if (n >= base) xbits = extra[n-base];
+ f = tree[n].fc.freq;
+ state.ts.opt_len += (ulg)f * (bits + xbits);
+ if (stree) state.ts.static_len += (ulg)f * (stree[n].dl.len + xbits);
+ }
+ if (overflow == 0) return;
+
+ Trace("\nbit length overflow\n");
+ /* This happens for example on obj2 and pic of the Calgary corpus */
+
+ /* Find the first bit length which could increase: */
+ do {
+ bits = max_length-1;
+ while (state.ts.bl_count[bits] == 0) bits--;
+ state.ts.bl_count[bits]--; /* move one leaf down the tree */
+ state.ts.bl_count[bits+1] += (ush)2; /* move one overflow item as its brother */
+ state.ts.bl_count[max_length]--;
+ /* The brother of the overflow item also moves one step up,
+ * but this does not affect bl_count[max_length]
+ */
+ overflow -= 2;
+ } while (overflow > 0);
+
+ /* Now recompute all bit lengths, scanning in increasing frequency.
+ * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+ * lengths instead of fixing only the wrong ones. This idea is taken
+ * from 'ar' written by Haruhiko Okumura.)
+ */
+ for (bits = max_length; bits != 0; bits--) {
+ n = state.ts.bl_count[bits];
+ while (n != 0) {
+ m = state.ts.heap[--h];
+ if (m > max_code) continue;
+ if (tree[m].dl.len != (ush)bits) {
+ Trace("code %d bits %d->%d\n", m, tree[m].dl.len, bits);
+ state.ts.opt_len += ((long)bits-(long)tree[m].dl.len)*(long)tree[m].fc.freq;
+ tree[m].dl.len = (ush)bits;
+ }
+ n--;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ * zero code length.
+ */
+void gen_codes (TState &state, ct_data *tree, int max_code)
+{
+ ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+ ush code = 0; /* running code value */
+ int bits; /* bit index */
+ int n; /* code index */
+
+ /* The distribution counts are first used to generate the code values
+ * without bit reversal.
+ */
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ next_code[bits] = code = (ush)((code + state.ts.bl_count[bits-1]) << 1);
+ }
+ /* Check that the bit counts in bl_count are consistent. The last code
+ * must be all ones.
+ */
+ Assert(state,code + state.ts.bl_count[MAX_BITS]-1 == (1<< ((ush) MAX_BITS)) - 1,
+ "inconsistent bit counts");
+ Trace("\ngen_codes: max_code %d ", max_code);
+
+ for (n = 0; n <= max_code; n++) {
+ int len = tree[n].dl.len;
+ if (len == 0) continue;
+ /* Now reverse the bits */
+ tree[n].fc.code = (ush)bi_reverse(next_code[len]++, len);
+
+ //Tracec(tree != state.ts.static_ltree, "\nn %3d %c l %2d c %4x (%x) ", n, (isgraph(n) ? n : ' '), len, tree[n].fc.code, next_code[len]-1);
+ }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ * and corresponding code. The length opt_len is updated; static_len is
+ * also updated if stree is not null. The field max_code is set.
+ */
+void build_tree(TState &state,tree_desc *desc)
+{
+ ct_data *tree = desc->dyn_tree;
+ ct_data *stree = desc->static_tree;
+ int elems = desc->elems;
+ int n, m; /* iterate over heap elements */
+ int max_code = -1; /* largest code with non zero frequency */
+ int node = elems; /* next internal node of the tree */
+
+ /* Construct the initial heap, with least frequent element in
+ * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+ * heap[0] is not used.
+ */
+ state.ts.heap_len = 0, state.ts.heap_max = HEAP_SIZE;
+
+ for (n = 0; n < elems; n++) {
+ if (tree[n].fc.freq != 0) {
+ state.ts.heap[++state.ts.heap_len] = max_code = n;
+ state.ts.depth[n] = 0;
+ } else {
+ tree[n].dl.len = 0;
+ }
+ }
+
+ /* The pkzip format requires that at least one distance code exists,
+ * and that at least one bit should be sent even if there is only one
+ * possible code. So to avoid special checks later on we force at least
+ * two codes of non zero frequency.
+ */
+ while (state.ts.heap_len < 2) {
+ int newcp = state.ts.heap[++state.ts.heap_len] = (max_code < 2 ? ++max_code : 0);
+ tree[newcp].fc.freq = 1;
+ state.ts.depth[newcp] = 0;
+ state.ts.opt_len--; if (stree) state.ts.static_len -= stree[newcp].dl.len;
+ /* new is 0 or 1 so it does not have extra bits */
+ }
+ desc->max_code = max_code;
+
+ /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+ * establish sub-heaps of increasing lengths:
+ */
+ for (n = state.ts.heap_len/2; n >= 1; n--) pqdownheap(state,tree, n);
+
+ /* Construct the Huffman tree by repeatedly combining the least two
+ * frequent nodes.
+ */
+ do {
+ pqremove(tree, n); /* n = node of least frequency */
+ m = state.ts.heap[SMALLEST]; /* m = node of next least frequency */
+
+ state.ts.heap[--state.ts.heap_max] = n; /* keep the nodes sorted by frequency */
+ state.ts.heap[--state.ts.heap_max] = m;
+
+ /* Create a new node father of n and m */
+ tree[node].fc.freq = (ush)(tree[n].fc.freq + tree[m].fc.freq);
+ state.ts.depth[node] = (uch) (Max(state.ts.depth[n], state.ts.depth[m]) + 1);
+ tree[n].dl.dad = tree[m].dl.dad = (ush)node;
+ /* and insert the new node in the heap */
+ state.ts.heap[SMALLEST] = node++;
+ pqdownheap(state,tree, SMALLEST);
+
+ } while (state.ts.heap_len >= 2);
+
+ state.ts.heap[--state.ts.heap_max] = state.ts.heap[SMALLEST];
+
+ /* At this point, the fields freq and dad are set. We can now
+ * generate the bit lengths.
+ */
+ gen_bitlen(state,(tree_desc *)desc);
+
+ /* The field len is now set, we can generate the bit codes */
+ gen_codes (state,(ct_data *)tree, max_code);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree. Updates opt_len to take into account the repeat
+ * counts. (The contribution of the bit length codes will be added later
+ * during the construction of bl_tree.)
+ */
+void scan_tree (TState &state,ct_data *tree, int max_code)
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].dl.len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ if (nextlen == 0) max_count = 138, min_count = 3;
+ tree[max_code+1].dl.len = (ush)-1; /* guard */
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].dl.len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ state.ts.bl_tree[curlen].fc.freq = (ush)(state.ts.bl_tree[curlen].fc.freq + count);
+ } else if (curlen != 0) {
+ if (curlen != prevlen) state.ts.bl_tree[curlen].fc.freq++;
+ state.ts.bl_tree[REP_3_6].fc.freq++;
+ } else if (count <= 10) {
+ state.ts.bl_tree[REPZ_3_10].fc.freq++;
+ } else {
+ state.ts.bl_tree[REPZ_11_138].fc.freq++;
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+void send_tree (TState &state, ct_data *tree, int max_code)
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].dl.len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ /* tree[max_code+1].dl.len = -1; */ /* guard already set */
+ if (nextlen == 0) max_count = 138, min_count = 3;
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].dl.len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ do { send_code(state, curlen, state.ts.bl_tree); } while (--count != 0);
+
+ } else if (curlen != 0) {
+ if (curlen != prevlen) {
+ send_code(state, curlen, state.ts.bl_tree); count--;
+ }
+ Assert(state,count >= 3 && count <= 6, " 3_6?");
+ send_code(state,REP_3_6, state.ts.bl_tree); send_bits(state,count-3, 2);
+
+ } else if (count <= 10) {
+ send_code(state,REPZ_3_10, state.ts.bl_tree); send_bits(state,count-3, 3);
+
+ } else {
+ send_code(state,REPZ_11_138, state.ts.bl_tree); send_bits(state,count-11, 7);
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+int build_bl_tree(TState &state)
+{
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ /* Determine the bit length frequencies for literal and distance trees */
+ scan_tree(state,(ct_data *)state.ts.dyn_ltree, state.ts.l_desc.max_code);
+ scan_tree(state,(ct_data *)state.ts.dyn_dtree, state.ts.d_desc.max_code);
+
+ /* Build the bit length tree: */
+ build_tree(state,(tree_desc *)(&state.ts.bl_desc));
+ /* opt_len now includes the length of the tree representations, except
+ * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+ */
+
+ /* Determine the number of bit length codes to send. The pkzip format
+ * requires that at least 4 bit length codes be sent. (appnote.txt says
+ * 3 but the actual value used is 4.)
+ */
+ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+ if (state.ts.bl_tree[bl_order[max_blindex]].dl.len != 0) break;
+ }
+ /* Update opt_len to include the bit length tree and counts */
+ state.ts.opt_len += 3*(max_blindex+1) + 5+5+4;
+ Trace("\ndyn trees: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+
+ return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+void send_all_trees(TState &state,int lcodes, int dcodes, int blcodes)
+{
+ int rank; /* index in bl_order */
+
+ Assert(state,lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+ Assert(state,lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+ "too many codes");
+ Trace("\nbl counts: ");
+ send_bits(state,lcodes-257, 5);
+ /* not +255 as stated in appnote.txt 1.93a or -256 in 2.04c */
+ send_bits(state,dcodes-1, 5);
+ send_bits(state,blcodes-4, 4); /* not -3 as stated in appnote.txt */
+ for (rank = 0; rank < blcodes; rank++) {
+ Trace("\nbl code %2d ", bl_order[rank]);
+ send_bits(state,state.ts.bl_tree[bl_order[rank]].dl.len, 3);
+ }
+ Trace("\nbl tree: sent %ld", state.bs.bits_sent);
+
+ send_tree(state,(ct_data *)state.ts.dyn_ltree, lcodes-1); /* send the literal tree */
+ Trace("\nlit tree: sent %ld", state.bs.bits_sent);
+
+ send_tree(state,(ct_data *)state.ts.dyn_dtree, dcodes-1); /* send the distance tree */
+ Trace("\ndist tree: sent %ld", state.bs.bits_sent);
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file. This function
+ * returns the total compressed length (in bytes) for the file so far.
+ */
+ulg flush_block(TState &state,char *buf, ulg stored_len, int eof)
+{
+ ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ state.ts.flag_buf[state.ts.last_flags] = state.ts.flags; /* Save the flags for the last 8 items */
+
+ /* Check if the file is ascii or binary */
+ if (*state.ts.file_type == (ush)UNKNOWN) set_file_type(state);
+
+ /* Construct the literal and distance trees */
+ build_tree(state,(tree_desc *)(&state.ts.l_desc));
+ Trace("\nlit data: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+
+ build_tree(state,(tree_desc *)(&state.ts.d_desc));
+ Trace("\ndist data: dyn %ld, stat %ld", state.ts.opt_len, state.ts.static_len);
+ /* At this point, opt_len and static_len are the total bit lengths of
+ * the compressed block data, excluding the tree representations.
+ */
+
+ /* Build the bit length tree for the above two trees, and get the index
+ * in bl_order of the last bit length code to send.
+ */
+ max_blindex = build_bl_tree(state);
+
+ /* Determine the best encoding. Compute first the block length in bytes */
+ opt_lenb = (state.ts.opt_len+3+7)>>3;
+ static_lenb = (state.ts.static_len+3+7)>>3;
+ state.ts.input_len += stored_len; /* for debugging only */
+
+ Trace("\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u dist %u ",
+ opt_lenb, state.ts.opt_len, static_lenb, state.ts.static_len, stored_len,
+ state.ts.last_lit, state.ts.last_dist);
+
+ if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+ // Originally, zip allowed the file to be transformed from a compressed
+ // into a stored file in the case where compression failed, there
+ // was only one block, and it was allowed to change. I've removed this
+ // possibility since the code's cleaner if no changes are allowed.
+ //if (stored_len <= opt_lenb && eof && state.ts.cmpr_bytelen == 0L
+ // && state.ts.cmpr_len_bits == 0L && state.seekable)
+ //{ // && state.ts.file_method != NULL
+ // // Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there:
+ // Assert(state,buf!=NULL,"block vanished");
+ // copy_block(state,buf, (unsigned)stored_len, 0); // without header
+ // state.ts.cmpr_bytelen = stored_len;
+ // Assert(state,false,"unimplemented *state.ts.file_method = STORE;");
+ // //*state.ts.file_method = STORE;
+ //}
+ //else
+ if (stored_len+4 <= opt_lenb && buf != (char*)NULL) {
+ /* 4: two words for the lengths */
+ /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+ * Otherwise we can't have processed more than WSIZE input bytes since
+ * the last block flush, because compression would have been
+ * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+ * transform a block into a stored block.
+ */
+ send_bits(state,(STORED_BLOCK<<1)+eof, 3); /* send block type */
+ state.ts.cmpr_bytelen += ((state.ts.cmpr_len_bits + 3 + 7) >> 3) + stored_len + 4;
+ state.ts.cmpr_len_bits = 0L;
+
+ copy_block(state,buf, (unsigned)stored_len, 1); /* with header */
+ }
+ else if (static_lenb == opt_lenb) {
+ send_bits(state,(STATIC_TREES<<1)+eof, 3);
+ compress_block(state,(ct_data *)state.ts.static_ltree, (ct_data *)state.ts.static_dtree);
+ state.ts.cmpr_len_bits += 3 + state.ts.static_len;
+ state.ts.cmpr_bytelen += state.ts.cmpr_len_bits >> 3;
+ state.ts.cmpr_len_bits &= 7L;
+ }
+ else {
+ send_bits(state,(DYN_TREES<<1)+eof, 3);
+ send_all_trees(state,state.ts.l_desc.max_code+1, state.ts.d_desc.max_code+1, max_blindex+1);
+ compress_block(state,(ct_data *)state.ts.dyn_ltree, (ct_data *)state.ts.dyn_dtree);
+ state.ts.cmpr_len_bits += 3 + state.ts.opt_len;
+ state.ts.cmpr_bytelen += state.ts.cmpr_len_bits >> 3;
+ state.ts.cmpr_len_bits &= 7L;
+ }
+ Assert(state,((state.ts.cmpr_bytelen << 3) + state.ts.cmpr_len_bits) == state.bs.bits_sent, "bad compressed size");
+ init_block(state);
+
+ if (eof) {
+ // Assert(state,input_len == isize, "bad input size");
+ bi_windup(state);
+ state.ts.cmpr_len_bits += 7; /* align on byte boundary */
+ }
+ Trace("\n");
+
+ return state.ts.cmpr_bytelen + (state.ts.cmpr_len_bits >> 3);
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int ct_tally (TState &state,int dist, int lc)
+{
+ state.ts.l_buf[state.ts.last_lit++] = (uch)lc;
+ if (dist == 0) {
+ /* lc is the unmatched char */
+ state.ts.dyn_ltree[lc].fc.freq++;
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ dist--; /* dist = match distance - 1 */
+ Assert(state,(ush)dist < (ush)MAX_DIST &&
+ (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+ (ush)d_code(dist) < (ush)D_CODES, "ct_tally: bad match");
+
+ state.ts.dyn_ltree[state.ts.length_code[lc]+LITERALS+1].fc.freq++;
+ state.ts.dyn_dtree[d_code(dist)].fc.freq++;
+
+ state.ts.d_buf[state.ts.last_dist++] = (ush)dist;
+ state.ts.flags |= state.ts.flag_bit;
+ }
+ state.ts.flag_bit <<= 1;
+
+ /* Output the flags if they fill a byte: */
+ if ((state.ts.last_lit & 7) == 0) {
+ state.ts.flag_buf[state.ts.last_flags++] = state.ts.flags;
+ state.ts.flags = 0, state.ts.flag_bit = 1;
+ }
+ /* Try to guess if it is profitable to stop the current block here */
+ if (state.level > 2 && (state.ts.last_lit & 0xfff) == 0) {
+ /* Compute an upper bound for the compressed length */
+ ulg out_length = (ulg)state.ts.last_lit*8L;
+ ulg in_length = (ulg)state.ds.strstart-state.ds.block_start;
+ int dcode;
+ for (dcode = 0; dcode < D_CODES; dcode++) {
+ out_length += (ulg)state.ts.dyn_dtree[dcode].fc.freq*(5L+extra_dbits[dcode]);
+ }
+ out_length >>= 3;
+ Trace("\nlast_lit %u, last_dist %u, in %ld, out ~%ld(%ld%%) ",
+ state.ts.last_lit, state.ts.last_dist, in_length, out_length,
+ 100L - out_length*100L/in_length);
+ if (state.ts.last_dist < state.ts.last_lit/2 && out_length < in_length/2) return 1;
+ }
+ return (state.ts.last_lit == LIT_BUFSIZE-1 || state.ts.last_dist == DIST_BUFSIZE);
+ /* We avoid equality with LIT_BUFSIZE because of wraparound at 64K
+ * on 16 bit machines and because stored blocks are restricted to
+ * 64K-1 bytes.
+ */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+void compress_block(TState &state,ct_data *ltree, ct_data *dtree)
+{
+ unsigned dist; /* distance of matched string */
+ int lc; /* match length or unmatched char (if dist == 0) */
+ unsigned lx = 0; /* running index in l_buf */
+ unsigned dx = 0; /* running index in d_buf */
+ unsigned fx = 0; /* running index in flag_buf */
+ uch flag = 0; /* current flags */
+ unsigned code; /* the code to send */
+ int extra; /* number of extra bits to send */
+
+ if (state.ts.last_lit != 0) do {
+ if ((lx & 7) == 0) flag = state.ts.flag_buf[fx++];
+ lc = state.ts.l_buf[lx++];
+ if ((flag & 1) == 0) {
+ send_code(state,lc, ltree); /* send a literal byte */
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ code = state.ts.length_code[lc];
+ send_code(state,code+LITERALS+1, ltree); /* send the length code */
+ extra = extra_lbits[code];
+ if (extra != 0) {
+ lc -= state.ts.base_length[code];
+ send_bits(state,lc, extra); /* send the extra length bits */
+ }
+ dist = state.ts.d_buf[dx++];
+ /* Here, dist is the match distance - 1 */
+ code = d_code(dist);
+ Assert(state,code < D_CODES, "bad d_code");
+
+ send_code(state,code, dtree); /* send the distance code */
+ extra = extra_dbits[code];
+ if (extra != 0) {
+ dist -= state.ts.base_dist[code];
+ send_bits(state,dist, extra); /* send the extra distance bits */
+ }
+ } /* literal or match pair ? */
+ flag >>= 1;
+ } while (lx < state.ts.last_lit);
+
+ send_code(state,END_BLOCK, ltree);
+}
+
+/* ===========================================================================
+ * Set the file type to ASCII or BINARY, using a crude approximation:
+ * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
+ * IN assertion: the fields freq of dyn_ltree are set and the total of all
+ * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ */
+void set_file_type(TState &state)
+{
+ int n = 0;
+ unsigned ascii_freq = 0;
+ unsigned bin_freq = 0;
+ while (n < 7) bin_freq += state.ts.dyn_ltree[n++].fc.freq;
+ while (n < 128) ascii_freq += state.ts.dyn_ltree[n++].fc.freq;
+ while (n < LITERALS) bin_freq += state.ts.dyn_ltree[n++].fc.freq;
+ *state.ts.file_type = (ush)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
+}
+
+
+/* ===========================================================================
+ * Initialize the bit string routines.
+ */
+void bi_init (TState &state,char *tgt_buf, unsigned tgt_size, int flsh_allowed)
+{
+ state.bs.out_buf = tgt_buf;
+ state.bs.out_size = tgt_size;
+ state.bs.out_offset = 0;
+ state.bs.flush_flg = flsh_allowed;
+
+ state.bs.bi_buf = 0;
+ state.bs.bi_valid = 0;
+ state.bs.bits_sent = 0L;
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+void send_bits(TState &state,int value, int length)
+{
+ Assert(state,length > 0 && length <= 15, "invalid length");
+ state.bs.bits_sent += (ulg)length;
+ /* If not enough room in bi_buf, use (bi_valid) bits from bi_buf and
+ * (Buf_size - bi_valid) bits from value to flush the filled bi_buf,
+ * then fill in the rest of (value), leaving (length - (Buf_size-bi_valid))
+ * unused bits in bi_buf.
+ */
+ state.bs.bi_buf |= (value << state.bs.bi_valid);
+ state.bs.bi_valid += length;
+ if (state.bs.bi_valid > (int)Buf_size) {
+ PUTSHORT(state,state.bs.bi_buf);
+ state.bs.bi_valid -= Buf_size;
+ state.bs.bi_buf = (unsigned)value >> (length - state.bs.bi_valid);
+ }
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+unsigned bi_reverse(unsigned code, int len)
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
+ * Write out any remaining bits in an incomplete byte.
+ */
+void bi_windup(TState &state)
+{
+ if (state.bs.bi_valid > 8) {
+ PUTSHORT(state,state.bs.bi_buf);
+ } else if (state.bs.bi_valid > 0) {
+ PUTBYTE(state,state.bs.bi_buf);
+ }
+ if (state.bs.flush_flg) {
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset);
+ }
+ state.bs.bi_buf = 0;
+ state.bs.bi_valid = 0;
+ state.bs.bits_sent = (state.bs.bits_sent+7) & ~7;
+}
+
+/* ===========================================================================
+ * Copy a stored block to the zip file, storing first the length and its
+ * one's complement if requested.
+ */
+void copy_block(TState &state, char *block, unsigned len, int header)
+{
+ bi_windup(state); /* align on byte boundary */
+
+ if (header) {
+ PUTSHORT(state,(ush)len);
+ PUTSHORT(state,(ush)~len);
+ state.bs.bits_sent += 2*16;
+ }
+ if (state.bs.flush_flg) {
+ state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset);
+ state.bs.out_offset = len;
+ state.flush_outbuf(state.param,block, &state.bs.out_offset);
+ } else if (state.bs.out_offset + len > state.bs.out_size) {
+ Assert(state,false,"output buffer too small for in-memory compression");
+ } else {
+ memcpy(state.bs.out_buf + state.bs.out_offset, block, len);
+ state.bs.out_offset += len;
+ }
+ state.bs.bits_sent += (ulg)len<<3;
+}
+
+
+
+
+
+
+
+
+/* ===========================================================================
+ * Prototypes for functions.
+ */
+
+void fill_window (TState &state);
+ulg deflate_fast (TState &state);
+
+int longest_match (TState &state,IPos cur_match);
+
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(h,c) (h = (((h)<<H_SHIFT) ^ (c)) & HASH_MASK)
+
+/* ===========================================================================
+ * Insert string s in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of s are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#define INSERT_STRING(s, match_head) \
+ (UPDATE_HASH(state.ds.ins_h, state.ds.window[(s) + (MIN_MATCH-1)]), \
+ state.ds.prev[(s) & WMASK] = match_head = state.ds.head[state.ds.ins_h], \
+ state.ds.head[state.ds.ins_h] = (s))
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new file
+ *
+ * IN assertion: window_size is > 0 if the input file is already read or
+ * mmap'ed in the window[] array, 0 otherwise. In the first case,
+ * window_size is sufficient to contain the whole input file plus
+ * MIN_LOOKAHEAD bytes (to avoid referencing memory beyond the end
+ * of window[] when looking for matches towards the end).
+ */
+void lm_init (TState &state, int pack_level, ush *flags)
+{
+ register unsigned j;
+
+ Assert(state,pack_level>=1 && pack_level<=8,"bad pack level");
+
+ /* Do not slide the window if the whole input is already in memory
+ * (window_size > 0)
+ */
+ state.ds.sliding = 0;
+ if (state.ds.window_size == 0L) {
+ state.ds.sliding = 1;
+ state.ds.window_size = (ulg)2L*WSIZE;
+ }
+
+ /* Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+ state.ds.head[HASH_SIZE-1] = NIL;
+ memset((char*)state.ds.head, NIL, (unsigned)(HASH_SIZE-1)*sizeof(*state.ds.head));
+
+ /* Set the default configuration parameters:
+ */
+ state.ds.max_lazy_match = configuration_table[pack_level].max_lazy;
+ state.ds.good_match = configuration_table[pack_level].good_length;
+ state.ds.nice_match = configuration_table[pack_level].nice_length;
+ state.ds.max_chain_length = configuration_table[pack_level].max_chain;
+ if (pack_level <= 2) {
+ *flags |= FAST;
+ } else if (pack_level >= 8) {
+ *flags |= SLOW;
+ }
+ /* ??? reduce max_chain_length for binary files */
+
+ state.ds.strstart = 0;
+ state.ds.block_start = 0L;
+
+ j = WSIZE;
+ j <<= 1; // Can read 64K in one step
+ state.ds.lookahead = state.readfunc(state, (char*)state.ds.window, j);
+
+ if (state.ds.lookahead == 0 || state.ds.lookahead == (unsigned)EOF) {
+ state.ds.eofile = 1, state.ds.lookahead = 0;
+ return;
+ }
+ state.ds.eofile = 0;
+ /* Make sure that we always have enough lookahead. This is important
+ * if input comes from a device such as a tty.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+
+ state.ds.ins_h = 0;
+ for (j=0; j<MIN_MATCH-1; j++) UPDATE_HASH(state.ds.ins_h, state.ds.window[j]);
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but this is
+ * not important since only literal bytes will be emitted.
+ */
+}
+
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ */
+// For 80x86 and 680x0 and ARM, an optimized version is in match.asm or
+// match.S. The code is functionally equivalent, so you can use the C version
+// if desired. Which I do so desire!
+int longest_match(TState &state,IPos cur_match)
+{
+ unsigned chain_length = state.ds.max_chain_length; /* max hash chain length */
+ register uch far *scan = state.ds.window + state.ds.strstart; /* current string */
+ register uch far *match; /* matched string */
+ register int len; /* length of current match */
+ int best_len = state.ds.prev_length; /* best match length so far */
+ IPos limit = state.ds.strstart > (IPos)MAX_DIST ? state.ds.strstart - (IPos)MAX_DIST : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+
+ // The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ // It is easy to get rid of this optimization if necessary.
+ Assert(state,HASH_BITS>=8 && MAX_MATCH==258,"Code too clever");
+
+
+
+ register uch far *strend = state.ds.window + state.ds.strstart + MAX_MATCH;
+ register uch scan_end1 = scan[best_len-1];
+ register uch scan_end = scan[best_len];
+
+ /* Do not waste too much time if we already have a good match: */
+ if (state.ds.prev_length >= state.ds.good_match) {
+ chain_length >>= 2;
+ }
+
+ Assert(state,state.ds.strstart <= state.ds.window_size-MIN_LOOKAHEAD, "insufficient lookahead");
+
+ do {
+ Assert(state,cur_match < state.ds.strstart, "no future");
+ match = state.ds.window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2:
+ */
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(state,scan <= state.ds.window+(unsigned)(state.ds.window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+
+ if (len > best_len) {
+ state.ds.match_start = cur_match;
+ best_len = len;
+ if (len >= state.ds.nice_match) break;
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+ }
+ } while ((cur_match = state.ds.prev[cur_match & WMASK]) > limit
+ && --chain_length != 0);
+
+ return best_len;
+}
+
+
+
+#define check_match(state,start, match, length)
+// or alternatively...
+//void check_match(TState &state,IPos start, IPos match, int length)
+//{ // check that the match is indeed a match
+// if (memcmp((char*)state.ds.window + match,
+// (char*)state.ds.window + start, length) != EQUAL) {
+// fprintf(stderr,
+// " start %d, match %d, length %d\n",
+// start, match, length);
+// error("invalid match");
+// }
+// if (state.verbose > 1) {
+// fprintf(stderr,"\\[%d,%d]", start-match, length);
+// do { fprintf(stdout,"%c",state.ds.window[start++]); } while (--length != 0);
+// }
+//}
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead, and sets eofile if end of input file.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD && strstart + lookahead > 0
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or eofile is set; file reads are
+ * performed for at least two bytes (required for the translate_eol option).
+ */
+void fill_window(TState &state)
+{
+ register unsigned n, m;
+ unsigned more; /* Amount of free space at the end of the window. */
+
+ do {
+ more = (unsigned)(state.ds.window_size - (ulg)state.ds.lookahead - (ulg)state.ds.strstart);
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ if (more == (unsigned)EOF) {
+ /* Very unlikely, but possible on 16 bit machine if strstart == 0
+ * and lookahead == 1 (input done one byte at time)
+ */
+ more--;
+
+ /* For MMAP or BIG_MEM, the whole input file is already in memory so
+ * we must not perform sliding. We must however call (*read_buf)() in
+ * order to compute the crc, update lookahead and possibly set eofile.
+ */
+ } else if (state.ds.strstart >= WSIZE+MAX_DIST && state.ds.sliding) {
+
+ /* By the IN assertion, the window is not empty so we can't confuse
+ * more == 0 with more == 64K on a 16 bit machine.
+ */
+ memcpy((char*)state.ds.window, (char*)state.ds.window+WSIZE, (unsigned)WSIZE);
+ state.ds.match_start -= WSIZE;
+ state.ds.strstart -= WSIZE; /* we now have strstart >= MAX_DIST: */
+
+ state.ds.block_start -= (long) WSIZE;
+
+ for (n = 0; n < HASH_SIZE; n++) {
+ m = state.ds.head[n];
+ state.ds.head[n] = (Pos)(m >= WSIZE ? m-WSIZE : NIL);
+ }
+ for (n = 0; n < WSIZE; n++) {
+ m = state.ds.prev[n];
+ state.ds.prev[n] = (Pos)(m >= WSIZE ? m-WSIZE : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ }
+ more += WSIZE;
+ }
+ if (state.ds.eofile) return;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the MMAP or BIG_MEM case (not yet supported in gzip),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(state,more >= 2, "more < 2");
+
+ n = state.readfunc(state, (char*)state.ds.window+state.ds.strstart+state.ds.lookahead, more);
+
+ if (n == 0 || n == (unsigned)EOF) {
+ state.ds.eofile = 1;
+ } else {
+ state.ds.lookahead += n;
+ }
+ } while (state.ds.lookahead < MIN_LOOKAHEAD && !state.ds.eofile);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK(state,eof) \
+ flush_block(state,state.ds.block_start >= 0L ? (char*)&state.ds.window[(unsigned)state.ds.block_start] : \
+ (char*)NULL, (long)state.ds.strstart - state.ds.block_start, (eof))
+
+/* ===========================================================================
+ * Processes a new input file and return its compressed length. This
+ * function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+ulg deflate_fast(TState &state)
+{
+ IPos hash_head = NIL; /* head of the hash chain */
+ int flush; /* set if current block must be flushed */
+ unsigned match_length = 0; /* length of best match */
+
+ state.ds.prev_length = MIN_MATCH-1;
+ while (state.ds.lookahead != 0) {
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (state.ds.lookahead >= MIN_MATCH)
+ INSERT_STRING(state.ds.strstart, hash_head);
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && state.ds.strstart - hash_head <= MAX_DIST) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ /* Do not look for matches beyond the end of the input.
+ * This is necessary to make deflate deterministic.
+ */
+ if ((unsigned)state.ds.nice_match > state.ds.lookahead) state.ds.nice_match = (int)state.ds.lookahead;
+ match_length = longest_match (state,hash_head);
+ /* longest_match() sets match_start */
+ if (match_length > state.ds.lookahead) match_length = state.ds.lookahead;
+ }
+ if (match_length >= MIN_MATCH) {
+ check_match(state,state.ds.strstart, state.ds.match_start, match_length);
+
+ flush = ct_tally(state,state.ds.strstart-state.ds.match_start, match_length - MIN_MATCH);
+
+ state.ds.lookahead -= match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+ if (match_length <= state.ds.max_insert_length
+ && state.ds.lookahead >= MIN_MATCH) {
+ match_length--; /* string at strstart already in hash table */
+ do {
+ state.ds.strstart++;
+ INSERT_STRING(state.ds.strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--match_length != 0);
+ state.ds.strstart++;
+ } else {
+ state.ds.strstart += match_length;
+ match_length = 0;
+ state.ds.ins_h = state.ds.window[state.ds.strstart];
+ UPDATE_HASH(state.ds.ins_h, state.ds.window[state.ds.strstart+1]);
+ Assert(state,MIN_MATCH==3,"Call UPDATE_HASH() MIN_MATCH-3 more times");
+ }
+ } else {
+ /* No match, output a literal byte */
+ flush = ct_tally (state,0, state.ds.window[state.ds.strstart]);
+ state.ds.lookahead--;
+ state.ds.strstart++;
+ }
+ if (flush) FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+ }
+ return FLUSH_BLOCK(state,1); /* eof */
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+ulg deflate(TState &state)
+{
+ IPos hash_head = NIL; /* head of hash chain */
+ IPos prev_match; /* previous match */
+ int flush; /* set if current block must be flushed */
+ int match_available = 0; /* set if previous match exists */
+ register unsigned match_length = MIN_MATCH-1; /* length of best match */
+
+ if (state.level <= 3) return deflate_fast(state); /* optimized for speed */
+
+ /* Process the input block. */
+ while (state.ds.lookahead != 0) {
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (state.ds.lookahead >= MIN_MATCH)
+ INSERT_STRING(state.ds.strstart, hash_head);
+
+ /* Find the longest match, discarding those <= prev_length.
+ */
+ state.ds.prev_length = match_length, prev_match = state.ds.match_start;
+ match_length = MIN_MATCH-1;
+
+ if (hash_head != NIL && state.ds.prev_length < state.ds.max_lazy_match &&
+ state.ds.strstart - hash_head <= MAX_DIST) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ /* Do not look for matches beyond the end of the input.
+ * This is necessary to make deflate deterministic.
+ */
+ if ((unsigned)state.ds.nice_match > state.ds.lookahead) state.ds.nice_match = (int)state.ds.lookahead;
+ match_length = longest_match (state,hash_head);
+ /* longest_match() sets match_start */
+ if (match_length > state.ds.lookahead) match_length = state.ds.lookahead;
+
+ /* Ignore a length 3 match if it is too distant: */
+ if (match_length == MIN_MATCH && state.ds.strstart-state.ds.match_start > TOO_FAR){
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ match_length = MIN_MATCH-1;
+ }
+ }
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (state.ds.prev_length >= MIN_MATCH && match_length <= state.ds.prev_length) {
+ unsigned max_insert = state.ds.strstart + state.ds.lookahead - MIN_MATCH;
+ check_match(state,state.ds.strstart-1, prev_match, state.ds.prev_length);
+ flush = ct_tally(state,state.ds.strstart-1-prev_match, state.ds.prev_length - MIN_MATCH);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted.
+ */
+ state.ds.lookahead -= state.ds.prev_length-1;
+ state.ds.prev_length -= 2;
+ do {
+ if (++state.ds.strstart <= max_insert) {
+ INSERT_STRING(state.ds.strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ }
+ } while (--state.ds.prev_length != 0);
+ state.ds.strstart++;
+ match_available = 0;
+ match_length = MIN_MATCH-1;
+
+ if (flush) FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+
+ } else if (match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ if (ct_tally (state,0, state.ds.window[state.ds.strstart-1])) {
+ FLUSH_BLOCK(state,0), state.ds.block_start = state.ds.strstart;
+ }
+ state.ds.strstart++;
+ state.ds.lookahead--;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ match_available = 1;
+ state.ds.strstart++;
+ state.ds.lookahead--;
+ }
+// Assert(state,strstart <= isize && lookahead <= isize, "a bit too far");
+
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (state.ds.lookahead < MIN_LOOKAHEAD) fill_window(state);
+ }
+ if (match_available) ct_tally (state,0, state.ds.window[state.ds.strstart-1]);
+
+ return FLUSH_BLOCK(state,1); /* eof */
+}
+
+
+
+
+
+
+
+
+
+
+
+
+int putlocal(struct zlist far *z, WRITEFUNC wfunc,void *param)
+{ // Write a local header described by *z to file *f. Return a ZE_ error code.
+ PUTLG(LOCSIG, f);
+ PUTSH(z->ver, f);
+ PUTSH(z->lflg, f);
+ PUTSH(z->how, f);
+ PUTLG(z->tim, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ PUTSH(z->nam, f);
+ PUTSH(z->ext, f);
+ size_t res = (size_t)wfunc(param, z->iname, (unsigned int)z->nam);
+ if (res!=z->nam) return ZE_TEMP;
+ if (z->ext)
+ { res = (size_t)wfunc(param, z->extra, (unsigned int)z->ext);
+ if (res!=z->ext) return ZE_TEMP;
+ }
+ return ZE_OK;
+}
+
+int putextended(struct zlist far *z, WRITEFUNC wfunc, void *param)
+{ // Write an extended local header described by *z to file *f. Returns a ZE_ code
+ PUTLG(EXTLOCSIG, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ return ZE_OK;
+}
+
+int putcentral(struct zlist far *z, WRITEFUNC wfunc, void *param)
+{ // Write a central header entry of *z to file *f. Returns a ZE_ code.
+ PUTLG(CENSIG, f);
+ PUTSH(z->vem, f);
+ PUTSH(z->ver, f);
+ PUTSH(z->flg, f);
+ PUTSH(z->how, f);
+ PUTLG(z->tim, f);
+ PUTLG(z->crc, f);
+ PUTLG(z->siz, f);
+ PUTLG(z->len, f);
+ PUTSH(z->nam, f);
+ PUTSH(z->cext, f);
+ PUTSH(z->com, f);
+ PUTSH(z->dsk, f);
+ PUTSH(z->att, f);
+ PUTLG(z->atx, f);
+ PUTLG(z->off, f);
+ if ((size_t)wfunc(param, z->iname, (unsigned int)z->nam) != z->nam ||
+ (z->cext && (size_t)wfunc(param, z->cextra, (unsigned int)z->cext) != z->cext) ||
+ (z->com && (size_t)wfunc(param, z->comment, (unsigned int)z->com) != z->com))
+ return ZE_TEMP;
+ return ZE_OK;
+}
+
+
+int putend(int n, ulg s, ulg c, extent m, char *z, WRITEFUNC wfunc, void *param)
+{ // write the end of the central-directory-data to file *f.
+ PUTLG(ENDSIG, f);
+ PUTSH(0, f);
+ PUTSH(0, f);
+ PUTSH(n, f);
+ PUTSH(n, f);
+ PUTLG(s, f);
+ PUTLG(c, f);
+ PUTSH(m, f);
+ // Write the comment, if any
+ if (m && wfunc(param, z, (unsigned int)m) != m) return ZE_TEMP;
+ return ZE_OK;
+}
+
+
+
+
+
+
+const ulg crc_table[256] = {
+ 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+ 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+ 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+ 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+ 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+ 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+ 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+ 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+ 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+ 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+ 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+ 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+ 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+ 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+ 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+ 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+ 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+ 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+ 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+ 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+ 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+ 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+ 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+ 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+ 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+ 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+ 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+ 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+ 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+ 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+ 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+ 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+ 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+ 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+ 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+ 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+ 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+ 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+ 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+ 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+ 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+ 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+ 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+ 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+ 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+ 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+ 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+ 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+ 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+ 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+ 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+ 0x2d02ef8dL
+};
+
+#define CRC32(c, b) (crc_table[((int)(c) ^ (b)) & 0xff] ^ ((c) >> 8))
+#define DO1(buf) crc = CRC32(crc, *buf++)
+#define DO2(buf) DO1(buf); DO1(buf)
+#define DO4(buf) DO2(buf); DO2(buf)
+#define DO8(buf) DO4(buf); DO4(buf)
+
+ulg crc32(ulg crc, const uch *buf, extent len)
+{ if (buf==NULL) return 0L;
+ crc = crc ^ 0xffffffffL;
+ while (len >= 8) {DO8(buf); len -= 8;}
+ if (len) do {DO1(buf);} while (--len);
+ return crc ^ 0xffffffffL; // (instead of ~c for 64-bit machines)
+}
+
+
+
+
+
+
+
+
+bool HasZipSuffix(const char *fn)
+{ const char *ext = fn+strlen(fn);
+ while (ext>fn && *ext!='.') ext--;
+ if (ext==fn && *ext!='.') return false;
+ if (stricmp(ext,".Z")==0) return true;
+ if (stricmp(ext,".zip")==0) return true;
+ if (stricmp(ext,".zoo")==0) return true;
+ if (stricmp(ext,".arc")==0) return true;
+ if (stricmp(ext,".lzh")==0) return true;
+ if (stricmp(ext,".arj")==0) return true;
+ if (stricmp(ext,".gz")==0) return true;
+ if (stricmp(ext,".tgz")==0) return true;
+ return false;
+}
+
+
+time_t filetime2timet(const FILETIME ft)
+{ SYSTEMTIME st; FileTimeToSystemTime(&ft,&st);
+ if (st.wYear<1970) {st.wYear=1970; st.wMonth=1; st.wDay=1;}
+ if (st.wYear>=2038) {st.wYear=2037; st.wMonth=12; st.wDay=31;}
+ struct tm tm;
+ tm.tm_sec = st.wSecond;
+ tm.tm_min = st.wMinute;
+ tm.tm_hour = st.wHour;
+ tm.tm_mday = st.wDay;
+ tm.tm_mon = st.wMonth-1;
+ tm.tm_year = st.wYear-1900;
+ tm.tm_isdst = 0;
+ time_t t = mktime(&tm);
+ return t;
+}
+
+
+ZRESULT GetFileInfo(HANDLE hf, ulg *attr, long *size, iztimes *times, ulg *timestamp)
+{
+ DWORD type=GetFileType(hf);
+ if (type!=FILE_TYPE_DISK)
+ return ZR_NOTINITED;
+ // The handle must be a handle to a file
+ // The date and time is returned in a long with the date most significant to allow
+ // unsigned integer comparison of absolute times. The attributes have two
+ // high bytes unix attr, and two low bytes a mapping of that to DOS attr.
+ //struct stat s; int res=stat(fn,&s); if (res!=0) return false;
+ // translate windows file attributes into zip ones.
+ BY_HANDLE_FILE_INFORMATION bhi;
+ BOOL res=GetFileInformationByHandle(hf,&bhi);
+ if (!res)
+ return ZR_NOFILE;
+
+ // +++1.3
+ /// Convert times from UTC to local time. MSDN says that FILETIME is local
+ /// for FAT file system and UTC for NTFS system, but tests show that both FAT and NTFS
+ /// return UTC time.
+ {
+ // Get time zone difference
+ SYSTEMTIME stUTC, stLocal;
+ GetSystemTime(&stUTC);
+ GetLocalTime(&stLocal); // could be a few milliseconds difference, but should we care?
+ FILETIME ftUTC, ftLocal;
+ SystemTimeToFileTime(&stUTC, &ftUTC);
+ SystemTimeToFileTime(&stLocal, &ftLocal);
+ LONG64 uiUTC, uiLocal;
+ memcpy (&uiUTC, &ftUTC, min(sizeof(LONG64), sizeof(FILETIME))); // use 'min' as safeguard, however both sizes should be the same: 64-bit
+ memcpy (&uiLocal, &ftLocal, min(sizeof(LONG64), sizeof(FILETIME)));
+ LONG64 uiTimeDiff = uiUTC - uiLocal;
+
+ // apply difference
+ FILETIME* pFileTimes[3] = { &bhi.ftLastWriteTime, &bhi.ftLastAccessTime, &bhi.ftCreationTime };
+ for (int i=0; i<3; i++){
+ LONG64 uiUTC_file;
+ memcpy (&uiUTC_file, pFileTimes[i], min(sizeof(LONG64), sizeof(FILETIME)));
+ LONG64 uiLocal_file = uiUTC_file - uiTimeDiff;
+ memcpy (pFileTimes[i], &uiLocal_file, min(sizeof(LONG64), sizeof(FILETIME)));
+ }
+ }
+
+ DWORD fa=bhi.dwFileAttributes;
+ ulg a=0;
+ // Zip uses the lower word for its interpretation of windows stuff
+ if (fa&FILE_ATTRIBUTE_READONLY) a|=0x01;
+ if (fa&FILE_ATTRIBUTE_HIDDEN) a|=0x02;
+ if (fa&FILE_ATTRIBUTE_SYSTEM) a|=0x04;
+ if (fa&FILE_ATTRIBUTE_DIRECTORY)a|=0x10;
+ if (fa&FILE_ATTRIBUTE_ARCHIVE) a|=0x20;
+ // It uses the upper word for standard unix attr, which we must manually construct
+ if (fa&FILE_ATTRIBUTE_DIRECTORY)a|=0x40000000; // directory
+ else a|=0x80000000; // normal file
+ a|=0x01000000; // readable
+ if (fa&FILE_ATTRIBUTE_READONLY) {}
+ else a|=0x00800000; // writeable
+ // now just a small heuristic to check if it's an executable:
+ DWORD red, hsize=GetFileSize(hf,NULL); if (hsize>40)
+ { SetFilePointer(hf,0,NULL,FILE_BEGIN); unsigned short magic; ReadFile(hf,&magic,sizeof(magic),&red,NULL);
+ SetFilePointer(hf,36,NULL,FILE_BEGIN); unsigned long hpos; ReadFile(hf,&hpos,sizeof(hpos),&red,NULL);
+ if (magic==0x54AD && hsize>hpos+4+20+28)
+ { SetFilePointer(hf,hpos,NULL,FILE_BEGIN); unsigned long signature; ReadFile(hf,&signature,sizeof(signature),&red,NULL);
+ if (signature==IMAGE_DOS_SIGNATURE || signature==IMAGE_OS2_SIGNATURE
+ || signature==IMAGE_OS2_SIGNATURE_LE || signature==IMAGE_NT_SIGNATURE)
+ { a |= 0x00400000; // executable
+ }
+ }
+ }
+ //
+ if (attr!=NULL) *attr = a;
+ if (size!=NULL) *size = hsize;
+ if (times!=NULL)
+ { // time_t is 32bit number of seconds elapsed since 0:0:0GMT, Jan1, 1970.
+ // but FILETIME is 64bit number of 100-nanosecs since Jan1, 1601
+ times->atime = filetime2timet(bhi.ftLastAccessTime);
+ times->mtime = filetime2timet(bhi.ftLastWriteTime);
+ times->ctime = filetime2timet(bhi.ftCreationTime);
+ }
+ if (timestamp!=NULL)
+ { WORD dosdate,dostime;
+ FileTimeToDosDateTime(&bhi.ftLastWriteTime,&dosdate,&dostime);
+ *timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ }
+ return ZR_OK;
+}
+
+
+
+
+
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+
+class TZip
+{ public:
+ TZip() : hfout(0),hmapout(0),zfis(0),obuf(0),hfin(0),writ(0),oerr(false),hasputcen(false),ooffset(0) {}
+ ~TZip() {}
+
+ // These variables say about the file we're writing into
+ // We can write to pipe, file-by-handle, file-by-name, memory-to-memmapfile
+ HANDLE hfout; // if valid, we'll write here (for files or pipes)
+ HANDLE hmapout; // otherwise, we'll write here (for memmap)
+ unsigned ooffset; // for hfout, this is where the pointer was initially
+ ZRESULT oerr; // did a write operation give rise to an error?
+ unsigned writ; // how far have we written. This is maintained by Add, not write(), to avoid confusion over seeks
+ bool ocanseek; // can we seek?
+ char *obuf; // this is where we've locked mmap to view.
+ unsigned int opos; // current pos in the mmap
+ unsigned int mapsize; // the size of the map we created
+ bool hasputcen; // have we yet placed the central directory?
+ //
+ TZipFileInfo *zfis; // each file gets added onto this list, for writing the table at the end
+
+ ZRESULT Create(void *z,unsigned int len,DWORD flags);
+ static unsigned sflush(void *param,const char *buf, unsigned *size);
+ static unsigned swrite(void *param,const char *buf, unsigned size);
+ unsigned int write(const char *buf,unsigned int size);
+ bool oseek(unsigned int pos);
+ ZRESULT GetMemory(void **pbuf, unsigned long *plen);
+ ZRESULT Close();
+
+ // some variables to do with the file currently being read:
+ // I haven't done it object-orientedly here, just put them all
+ // together, since OO didn't seem to make the design any clearer.
+ ulg attr; iztimes times; ulg timestamp; // all open_* methods set these
+ bool iseekable; long isize,ired; // size is not set until close() on pips
+ ulg crc; // crc is not set until close(). iwrit is cumulative
+ HANDLE hfin; bool selfclosehf; // for input files and pipes
+ const char *bufin; unsigned int lenin,posin; // for memory
+ // and a variable for what we've done with the input: (i.e. compressed it!)
+ ulg csize; // compressed size, set by the compression routines
+ // and this is used by some of the compression routines
+ char buf[16384];
+
+
+ ZRESULT open_file(const TCHAR *fn);
+ ZRESULT open_handle(HANDLE hf,unsigned int len);
+ ZRESULT open_mem(void *src,unsigned int len);
+ ZRESULT open_dir();
+ static unsigned sread(TState &s,char *buf,unsigned size);
+ unsigned read(char *buf, unsigned size);
+ ZRESULT iclose();
+
+ ZRESULT ideflate(TZipFileInfo *zfi);
+ ZRESULT istore();
+
+ ZRESULT Add(const char *odstzn, void *src,unsigned int len, DWORD flags);
+ ZRESULT AddCentral();
+
+};
+
+ZRESULT TZip::Create(void *z,unsigned int len,DWORD flags)
+{
+ if (hfout!=0 || hmapout!=0 || obuf!=0 || writ!=0 || oerr!=ZR_OK || hasputcen)
+ return ZR_NOTINITED;
+ //
+ if (flags==ZIP_HANDLE)
+ {
+ HANDLE hf = (HANDLE)z;
+ BOOL res = DuplicateHandle(GetCurrentProcess(),hf,GetCurrentProcess(),&hfout,0,FALSE,DUPLICATE_SAME_ACCESS);
+ if (!res)
+ return ZR_NODUPH;
+ // now we have our own hfout, which we must close. And the caller will close hf
+ DWORD type = GetFileType(hfout);
+ ocanseek = (type==FILE_TYPE_DISK);
+ if (type==FILE_TYPE_DISK)
+ ooffset=SetFilePointer(hfout,0,NULL,FILE_CURRENT);
+ else
+ ooffset=0;
+ return ZR_OK;
+ }
+ else if (flags==ZIP_FILENAME)
+ {
+#ifdef _UNICODE
+ const TCHAR *fn = (const TCHAR*)z;
+ hfout = CreateFileW(fn,GENERIC_WRITE,0,NULL,CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL);
+#else
+ const char *fn = (const char*)z;
+ hfout = CreateFileA(fn,GENERIC_WRITE,0,NULL,CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL);
+#endif
+
+ if (hfout==INVALID_HANDLE_VALUE)
+ {
+ hfout=0;
+ return ZR_NOFILE;
+ }
+ ocanseek=true;
+ ooffset=0;
+ return ZR_OK;
+ }
+ else if (flags==ZIP_MEMORY)
+ {
+ unsigned int size = len;
+ if (size==0)
+ return ZR_MEMSIZE;
+ if (z!=0)
+ obuf=(char*)z;
+ else
+ {
+ hmapout = CreateFileMapping(INVALID_HANDLE_VALUE,NULL,PAGE_READWRITE,0,size,NULL);
+ if (hmapout==NULL)
+ return ZR_NOALLOC;
+ obuf = (char*)MapViewOfFile(hmapout,FILE_MAP_ALL_ACCESS,0,0,size);
+ if (obuf==0)
+ {
+ CloseHandle(hmapout);
+ hmapout=0;
+ return ZR_NOALLOC;
+ }
+ }
+ ocanseek=true;
+ opos=0;
+ mapsize=size;
+ return ZR_OK;
+ }
+ else
+ return ZR_ARGS;
+}
+
+
+unsigned TZip::sflush(void *param,const char *buf, unsigned *size)
+{ // static
+ if (*size==0) return 0;
+ TZip *zip = (TZip*)param;
+ unsigned int writ = zip->write(buf,*size);
+ if (writ!=0) *size=0;
+ return writ;
+}
+unsigned TZip::swrite(void *param,const char *buf, unsigned size)
+{ // static
+ if (size==0) return 0;
+ TZip *zip=(TZip*)param; return zip->write(buf,size);
+}
+
+#if 0 // -----------------------------------------------------------
+unsigned int TZip::write(const char *buf,unsigned int size)
+{ if (obuf!=0)
+ { if (opos+size>=mapsize) {oerr=ZR_MEMSIZE; return 0;}
+ memcpy(obuf+opos, buf, size);
+ opos+=size;
+ return size;
+ }
+ else if (hfout!=0)
+ { DWORD writ; WriteFile(hfout,buf,size,&writ,NULL);
+ return writ;
+ }
+ oerr=ZR_NOTINITED; return 0;
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+unsigned int TZip::write(const char *buf, unsigned int size)
+{
+ if (obuf != 0)
+ {
+ if (opos+size >= mapsize)
+ {
+ int newmapsize = 2*mapsize>opos+size?2*mapsize:opos+size;
+ HANDLE hmapout2 = CreateFileMapping(INVALID_HANDLE_VALUE,NULL,PAGE_READWRITE,0,newmapsize,NULL);
+ if (hmapout2 == NULL)
+ return ZR_NOALLOC;
+ char *obuf2 = NULL; // this is where we've locked mmap to view.
+
+ obuf2 = (char*)MapViewOfFile(hmapout2,FILE_MAP_ALL_ACCESS,0,0,newmapsize);
+ if (obuf2 == 0)
+ {
+ CloseHandle(hmapout2);
+ hmapout2 = 0;
+ return ZR_NOALLOC;
+ }
+
+ memcpy(obuf2, obuf, mapsize);
+
+ UnmapViewOfFile(obuf);
+ CloseHandle(hmapout);
+
+ mapsize = newmapsize;
+ obuf = obuf2;
+ hmapout = hmapout2;
+ }
+ memcpy(obuf+opos, buf, size);
+ opos += size;
+ return size;
+ }
+ else if (hfout!=0)
+ {
+ DWORD writ = 0;
+ WriteFile(hfout,buf,size,&writ,NULL);
+ return writ;
+ }
+ oerr = ZR_NOTINITED;
+ return 0;
+}
+
+
+bool TZip::oseek(unsigned int pos)
+{ if (!ocanseek) {oerr=ZR_SEEK; return false;}
+ if (obuf!=0)
+ { if (pos>=mapsize) {oerr=ZR_MEMSIZE; return false;}
+ opos=pos;
+ return true;
+ }
+ else if (hfout!=0)
+ { SetFilePointer(hfout,pos+ooffset,NULL,FILE_BEGIN);
+ return true;
+ }
+ oerr=ZR_NOTINITED; return 0;
+}
+
+ZRESULT TZip::GetMemory(void **pbuf, unsigned long *plen)
+{ // When the user calls GetMemory, they're presumably at the end
+ // of all their adding. In any case, we have to add the central
+ // directory now, otherwise the memory we tell them won't be complete.
+ if (!hasputcen) AddCentral(); hasputcen=true;
+ if (pbuf!=NULL) *pbuf=(void*)obuf;
+ if (plen!=NULL) *plen=writ;
+ if (obuf==NULL) return ZR_NOTMMAP;
+ return ZR_OK;
+}
+
+ZRESULT TZip::Close()
+{ // if the directory hadn't already been added through a call to GetMemory,
+ // then we do it now
+ ZRESULT res=ZR_OK; if (!hasputcen) res=AddCentral(); hasputcen=true;
+ if (obuf!=0 && hmapout!=0) UnmapViewOfFile(obuf); obuf=0;
+ if (hmapout!=0) CloseHandle(hmapout); hmapout=0;
+ if (hfout!=0) CloseHandle(hfout); hfout=0;
+ return res;
+}
+
+
+
+
+ZRESULT TZip::open_file(const TCHAR *fn)
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ if (fn==0) return ZR_ARGS;
+ HANDLE hf = CreateFile(fn,GENERIC_READ,FILE_SHARE_READ,NULL,OPEN_EXISTING,0,NULL);
+ if (hf==INVALID_HANDLE_VALUE) return ZR_NOFILE;
+ ZRESULT res = open_handle(hf,0);
+ if (res!=ZR_OK) {CloseHandle(hf); return res;}
+ selfclosehf=true;
+ return ZR_OK;
+}
+ZRESULT TZip::open_handle(HANDLE hf,unsigned int len)
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ if (hf==0 || hf==INVALID_HANDLE_VALUE) return ZR_ARGS;
+ DWORD type = GetFileType(hf);
+ if (type==FILE_TYPE_DISK)
+ { ZRESULT res = GetFileInfo(hf,&attr,&isize,&times,&timestamp);
+ if (res!=ZR_OK) return res;
+ SetFilePointer(hf,0,NULL,FILE_BEGIN); // because GetFileInfo will have screwed it up
+ iseekable=true; hfin=hf;
+ return ZR_OK;
+ }
+ else
+ { attr= 0x80000000; // just a normal file
+ isize = -1; // can't know size until at the end
+ if (len!=0) isize=len; // unless we were told explicitly!
+ iseekable=false;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ hfin=hf;
+ return ZR_OK;
+ }
+}
+ZRESULT TZip::open_mem(void *src,unsigned int len)
+{ hfin=0; bufin=(const char*)src; selfclosehf=false; crc=CRCVAL_INITIAL; ired=0; csize=0; ired=0;
+ lenin=len; posin=0;
+ if (src==0 || len==0) return ZR_ARGS;
+ attr= 0x80000000; // just a normal file
+ isize = len;
+ iseekable=true;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ return ZR_OK;
+}
+ZRESULT TZip::open_dir()
+{ hfin=0; bufin=0; selfclosehf=false; crc=CRCVAL_INITIAL; isize=0; csize=0; ired=0;
+ attr= 0x41C00010; // a readable writable directory, and again directory
+ isize = 0;
+ iseekable=false;
+ SYSTEMTIME st; GetLocalTime(&st);
+ FILETIME ft; SystemTimeToFileTime(&st,&ft);
+ WORD dosdate,dostime; FileTimeToDosDateTime(&ft,&dosdate,&dostime);
+ times.atime = filetime2timet(ft);
+ times.mtime = times.atime;
+ times.ctime = times.atime;
+ timestamp = (WORD)dostime | (((DWORD)dosdate)<<16);
+ return ZR_OK;
+}
+
+unsigned TZip::sread(TState &s,char *buf,unsigned size)
+{ // static
+ TZip *zip = (TZip*)s.param;
+ return zip->read(buf,size);
+}
+
+unsigned TZip::read(char *buf, unsigned size)
+{ if (bufin!=0)
+ { if (posin>=lenin) return 0; // end of input
+ ulg red = lenin-posin;
+ if (red>size) red=size;
+ memcpy(buf, bufin+posin, red);
+ posin += red;
+ ired += red;
+ crc = crc32(crc, (uch*)buf, red);
+ return red;
+ }
+ else if (hfin!=0)
+ { DWORD red;
+ BOOL ok = ReadFile(hfin,buf,size,&red,NULL);
+ if (!ok) return 0;
+ ired += red;
+ crc = crc32(crc, (uch*)buf, red);
+ return red;
+ }
+ else {oerr=ZR_NOTINITED; return 0;}
+}
+
+ZRESULT TZip::iclose()
+{ if (selfclosehf && hfin!=0) CloseHandle(hfin); hfin=0;
+ bool mismatch = (isize!=-1 && isize!=ired);
+ isize=ired; // and crc has been being updated anyway
+ if (mismatch) return ZR_MISSIZE;
+ else return ZR_OK;
+}
+
+
+
+#if 0 // -----------------------------------------------------------
+ZRESULT TZip::ideflate(TZipFileInfo *zfi)
+{ TState state;
+ state.readfunc=sread; state.flush_outbuf=sflush;
+ state.param=this; state.level=8; state.seekable=iseekable; state.err=NULL;
+ // the following line will make ct_init realise it has to perform the init
+ state.ts.static_dtree[0].dl.len = 0;
+ // It would be nicer if I could figure out precisely which data had to
+ // be initted each time, and which didn't, but that's kind of difficult.
+ // Maybe for the next version...
+ //
+ bi_init(state,buf, sizeof(buf), TRUE); // it used to be just 1024-size, not 16384 as here
+ ct_init(state,&zfi->att);
+ lm_init(state,state.level, &zfi->flg);
+ ulg sz = deflate(state);
+ csize=sz;
+ if (state.err!=NULL) return ZR_FLATE;
+ else return ZR_OK;
+}
+#endif // -----------------------------------------------------------
+
+//+++1.2
+// create state object on heap
+ZRESULT TZip::ideflate(TZipFileInfo *zfi)
+{
+ ZRESULT zr = ZR_OK;
+ TState* state=new TState();
+ (*state).readfunc=sread; (*state).flush_outbuf=sflush;
+ (*state).param=this; (*state).level=8; (*state).seekable=iseekable; (*state).err=NULL;
+ // the following line will make ct_init realise it has to perform the init
+ (*state).ts.static_dtree[0].dl.len = 0;
+ // It would be nicer if I could figure out precisely which data had to
+ // be initted each time, and which didn't, but that's kind of difficult.
+ // Maybe for the next version...
+ //
+ bi_init(*state,buf, sizeof(buf), TRUE); // it used to be just 1024-size, not 16384 as here
+ ct_init(*state,&zfi->att);
+ lm_init(*state,(*state).level, &zfi->flg);
+ ulg sz = deflate(*state);
+ csize=sz;
+ if ((*state).err!=NULL)
+ {
+ zr = ZR_FLATE;
+ }
+ delete state;
+ return zr;
+}
+
+ZRESULT TZip::istore()
+{ ulg size=0;
+ for (;;)
+ { unsigned int cin=read(buf,16384); if (cin<=0 || cin==(unsigned int)EOF) break;
+ unsigned int cout = write(buf,cin); if (cout!=cin) return ZR_MISSIZE;
+ size += cin;
+ }
+ csize=size;
+ return ZR_OK;
+}
+
+
+
+
+ZRESULT TZip::Add(const char *odstzn, void *src,unsigned int len, DWORD flags)
+{
+ if (oerr)
+ return ZR_FAILED;
+ if (hasputcen)
+ return ZR_ENDED;
+
+ // zip has its own notion of what its names should look like: i.e. dir/file.stuff
+ char dstzn[MAX_PATH];
+ strcpy(dstzn, odstzn);
+ if (*dstzn == 0)
+ return ZR_ARGS;
+ char *d=dstzn;
+ while (*d != 0)
+ {
+ if (*d == '\\')
+ *d = '/'; d++;
+ }
+ bool isdir = (flags==ZIP_FOLDER);
+ bool needs_trailing_slash = (isdir && dstzn[strlen(dstzn)-1]!='/');
+ int method=DEFLATE;
+ if (isdir || HasZipSuffix(dstzn))
+ method=STORE;
+
+ // now open whatever was our input source:
+ ZRESULT openres;
+ if (flags==ZIP_FILENAME)
+ openres=open_file((const TCHAR*)src);
+ else if (flags==ZIP_HANDLE)
+ openres=open_handle((HANDLE)src,len);
+ else if (flags==ZIP_MEMORY)
+ openres=open_mem(src,len);
+ else if (flags==ZIP_FOLDER)
+ openres=open_dir();
+ else return ZR_ARGS;
+ if (openres!=ZR_OK)
+ return openres;
+
+ // A zip "entry" consists of a local header (which includes the file name),
+ // then the compressed data, and possibly an extended local header.
+
+ // Initialize the local header
+ TZipFileInfo zfi; zfi.nxt=NULL;
+ strcpy(zfi.name,"");
+ strcpy(zfi.iname,dstzn);
+ zfi.nam=strlen(zfi.iname);
+ if (needs_trailing_slash)
+ {
+ strcat(zfi.iname,"/");
+ zfi.nam++;
+ }
+ strcpy(zfi.zname,"");
+ zfi.extra=NULL; zfi.ext=0; // extra header to go after this compressed data, and its length
+ zfi.cextra=NULL; zfi.cext=0; // extra header to go in the central end-of-zip directory, and its length
+ zfi.comment=NULL; zfi.com=0; // comment, and its length
+ zfi.mark = 1;
+ zfi.dosflag = 0;
+ zfi.att = (ush)BINARY;
+ zfi.vem = (ush)0xB17; // 0xB00 is win32 os-code. 0x17 is 23 in decimal: zip 2.3
+ zfi.ver = (ush)20; // Needs PKUNZIP 2.0 to unzip it
+ zfi.tim = timestamp;
+ // Even though we write the header now, it will have to be rewritten, since we don't know compressed size or crc.
+ zfi.crc = 0; // to be updated later
+ zfi.flg = 8; // 8 means 'there is an extra header'. Assume for the moment that we need it.
+ zfi.lflg = zfi.flg; // to be updated later
+ zfi.how = (ush)method; // to be updated later
+ zfi.siz = (ulg)(method==STORE && isize>=0 ? isize : 0); // to be updated later
+ zfi.len = (ulg)(isize); // to be updated later
+ zfi.dsk = 0;
+ zfi.atx = attr;
+ zfi.off = writ+ooffset; // offset within file of the start of this local record
+ // stuff the 'times' structure into zfi.extra
+ char xloc[EB_L_UT_SIZE];
+ zfi.extra=xloc;
+ zfi.ext=EB_L_UT_SIZE;
+ char xcen[EB_C_UT_SIZE];
+ zfi.cextra=xcen;
+ zfi.cext=EB_C_UT_SIZE;
+ xloc[0] = 'U';
+ xloc[1] = 'T';
+ xloc[2] = EB_UT_LEN(3); // length of data part of e.f.
+ xloc[3] = 0;
+ xloc[4] = EB_UT_FL_MTIME | EB_UT_FL_ATIME | EB_UT_FL_CTIME;
+ xloc[5] = (char)(times.mtime);
+ xloc[6] = (char)(times.mtime >> 8);
+ xloc[7] = (char)(times.mtime >> 16);
+ xloc[8] = (char)(times.mtime >> 24);
+ xloc[9] = (char)(times.atime);
+ xloc[10] = (char)(times.atime >> 8);
+ xloc[11] = (char)(times.atime >> 16);
+ xloc[12] = (char)(times.atime >> 24);
+ xloc[13] = (char)(times.ctime);
+ xloc[14] = (char)(times.ctime >> 8);
+ xloc[15] = (char)(times.ctime >> 16);
+ xloc[16] = (char)(times.ctime >> 24);
+ memcpy(zfi.cextra,zfi.extra,EB_C_UT_SIZE);
+ zfi.cextra[EB_LEN] = EB_UT_LEN(1);
+
+
+ // (1) Start by writing the local header:
+ int r = putlocal(&zfi,swrite,this);
+ if (r!=ZE_OK)
+ {
+ iclose();
+ return ZR_WRITE;
+ }
+ writ += 4 + LOCHEAD + (unsigned int)zfi.nam + (unsigned int)zfi.ext;
+ if (oerr!=ZR_OK)
+ {
+ iclose();
+ return oerr;
+ }
+
+ //(2) Write deflated/stored file to zip file
+ ZRESULT writeres=ZR_OK;
+ if (!isdir && method==DEFLATE)
+ writeres=ideflate(&zfi);
+ else if (!isdir && method==STORE)
+ writeres=istore();
+ else if (isdir)
+ csize=0;
+ iclose();
+ writ += csize;
+ if (oerr!=ZR_OK)
+ return oerr;
+ if (writeres!=ZR_OK)
+ return ZR_WRITE;
+
+ // (3) Either rewrite the local header with correct information...
+ bool first_header_has_size_right = (zfi.siz==csize);
+ zfi.crc = crc;
+ zfi.siz = csize;
+ zfi.len = isize;
+ if (ocanseek)
+ {
+ zfi.how = (ush)method;
+ if ((zfi.flg & 1) == 0)
+ zfi.flg &= ~8; // clear the extended local header flag
+ zfi.lflg = zfi.flg;
+ // rewrite the local header:
+ if (!oseek(zfi.off-ooffset))
+ return ZR_SEEK;
+ if ((r = putlocal(&zfi, swrite,this)) != ZE_OK)
+ return ZR_WRITE;
+ if (!oseek(writ))
+ return ZR_SEEK;
+ }
+ else
+ {
+ // (4) ... or put an updated header at the end
+ if (zfi.how != (ush) method)
+ return ZR_NOCHANGE;
+ if (method==STORE && !first_header_has_size_right)
+ return ZR_NOCHANGE;
+ if ((r = putextended(&zfi, swrite,this)) != ZE_OK)
+ return ZR_WRITE;
+ writ += 16L;
+ zfi.flg = zfi.lflg; // if flg modified by inflate, for the central index
+ }
+ if (oerr!=ZR_OK)
+ return oerr;
+
+ // Keep a copy of the zipfileinfo, for our end-of-zip directory
+ char *cextra = new char[zfi.cext];
+ memcpy(cextra,zfi.cextra,zfi.cext); zfi.cextra=cextra;
+ TZipFileInfo *pzfi = new TZipFileInfo;
+ memcpy(pzfi,&zfi,sizeof(zfi));
+ if (zfis==NULL)
+ zfis=pzfi;
+ else
+ {
+ TZipFileInfo *z=zfis;
+ while (z->nxt!=NULL)
+ z=z->nxt;
+ z->nxt=pzfi;
+ }
+ return ZR_OK;
+}
+
+ZRESULT TZip::AddCentral()
+{ // write central directory
+ int numentries = 0;
+ ulg pos_at_start_of_central = writ;
+ //ulg tot_unc_size=0, tot_compressed_size=0;
+ bool okay=true;
+ for (TZipFileInfo *zfi=zfis; zfi!=NULL; )
+ { if (okay)
+ { int res = putcentral(zfi, swrite,this);
+ if (res!=ZE_OK) okay=false;
+ }
+ writ += 4 + CENHEAD + (unsigned int)zfi->nam + (unsigned int)zfi->cext + (unsigned int)zfi->com;
+ //tot_unc_size += zfi->len;
+ //tot_compressed_size += zfi->siz;
+ numentries++;
+ //
+ TZipFileInfo *zfinext = zfi->nxt;
+ if (zfi->cextra!=0) delete[] zfi->cextra;
+ delete zfi;
+ zfi = zfinext;
+ }
+ ulg center_size = writ - pos_at_start_of_central;
+ if (okay)
+ { int res = putend(numentries, center_size, pos_at_start_of_central+ooffset, 0, NULL, swrite,this);
+ if (res!=ZE_OK) okay=false;
+ writ += 4 + ENDHEAD + 0;
+ }
+ if (!okay) return ZR_WRITE;
+ return ZR_OK;
+}
+
+
+
+
+
+ZRESULT lasterrorZ=ZR_OK;
+
+unsigned int FormatZipMessageZ(ZRESULT code, char *buf,unsigned int len)
+{ if (code==ZR_RECENT) code=lasterrorZ;
+ const char *msg="unknown zip result code";
+ switch (code)
+ { case ZR_OK: msg="Success"; break;
+ case ZR_NODUPH: msg="Culdn't duplicate handle"; break;
+ case ZR_NOFILE: msg="Couldn't create/open file"; break;
+ case ZR_NOALLOC: msg="Failed to allocate memory"; break;
+ case ZR_WRITE: msg="Error writing to file"; break;
+ case ZR_NOTFOUND: msg="File not found in the zipfile"; break;
+ case ZR_MORE: msg="Still more data to unzip"; break;
+ case ZR_CORRUPT: msg="Zipfile is corrupt or not a zipfile"; break;
+ case ZR_READ: msg="Error reading file"; break;
+ case ZR_ARGS: msg="Caller: faulty arguments"; break;
+ case ZR_PARTIALUNZ: msg="Caller: the file had already been partially unzipped"; break;
+ case ZR_NOTMMAP: msg="Caller: can only get memory of a memory zipfile"; break;
+ case ZR_MEMSIZE: msg="Caller: not enough space allocated for memory zipfile"; break;
+ case ZR_FAILED: msg="Caller: there was a previous error"; break;
+ case ZR_ENDED: msg="Caller: additions to the zip have already been ended"; break;
+ case ZR_ZMODE: msg="Caller: mixing creation and opening of zip"; break;
+ case ZR_NOTINITED: msg="Zip-bug: internal initialisation not completed"; break;
+ case ZR_SEEK: msg="Zip-bug: trying to seek the unseekable"; break;
+ case ZR_MISSIZE: msg="Zip-bug: the anticipated size turned out wrong"; break;
+ case ZR_NOCHANGE: msg="Zip-bug: tried to change mind, but not allowed"; break;
+ case ZR_FLATE: msg="Zip-bug: an internal error during flation"; break;
+ }
+ unsigned int mlen=(unsigned int)strlen(msg);
+ if (buf==0 || len==0) return mlen;
+ unsigned int n=mlen; if (n+1>len) n=len-1;
+ strncpy(buf,msg,n); buf[n]=0;
+ return mlen;
+}
+
+
+
+typedef struct
+{ DWORD flag;
+ TZip *zip;
+} TZipHandleData;
+
+
+HZIP CreateZipZ(void *z,unsigned int len,DWORD flags)
+{
+ tzset();
+ TZip *zip = new TZip();
+ lasterrorZ = zip->Create(z,len,flags);
+ if (lasterrorZ != ZR_OK)
+ {
+ delete zip;
+ return 0;
+ }
+ TZipHandleData *han = new TZipHandleData;
+ han->flag = 2;
+ han->zip = zip;
+ return (HZIP)han;
+}
+
+ZRESULT ZipAdd(HZIP hz, const TCHAR *dstzn, void *src, unsigned int len, DWORD flags)
+{
+ if (hz == 0)
+ {
+ lasterrorZ = ZR_ARGS;
+ return ZR_ARGS;
+ }
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag != 2)
+ {
+ lasterrorZ = ZR_ZMODE;
+ return ZR_ZMODE;
+ }
+ TZip *zip = han->zip;
+
+
+ if (flags == ZIP_FILENAME)
+ {
+ char szDest[MAX_PATH*2];
+ memset(szDest, 0, sizeof(szDest));
+
+#ifdef _UNICODE
+ // need to convert Unicode dest to ANSI
+ int nActualChars = WideCharToMultiByte(CP_ACP, // code page
+ 0, // performance and mapping flags
+ (LPCWSTR) dstzn, // wide-character string
+ -1, // number of chars in string
+ szDest, // buffer for new string
+ MAX_PATH*2-2, // size of buffer
+ NULL, // default for unmappable chars
+ NULL); // set when default char used
+ if (nActualChars == 0)
+ return ZR_ARGS;
+#else
+ strcpy(szDest, dstzn);
+#endif
+
+ lasterrorZ = zip->Add(szDest, src, len, flags);
+ }
+ else
+ {
+ lasterrorZ = zip->Add((char *)dstzn, src, len, flags);
+ }
+
+ return lasterrorZ;
+}
+
+ZRESULT ZipGetMemory(HZIP hz, void **buf, unsigned long *len)
+{ if (hz==0) {if (buf!=0) *buf=0; if (len!=0) *len=0; lasterrorZ=ZR_ARGS;return ZR_ARGS;}
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag!=2) {lasterrorZ=ZR_ZMODE;return ZR_ZMODE;}
+ TZip *zip = han->zip;
+ lasterrorZ = zip->GetMemory(buf,len);
+ return lasterrorZ;
+}
+
+ZRESULT CloseZipZ(HZIP hz)
+{ if (hz==0) {lasterrorZ=ZR_ARGS;return ZR_ARGS;}
+ TZipHandleData *han = (TZipHandleData*)hz;
+ if (han->flag!=2) {lasterrorZ=ZR_ZMODE;return ZR_ZMODE;}
+ TZip *zip = han->zip;
+ lasterrorZ = zip->Close();
+ delete zip;
+ delete han;
+ return lasterrorZ;
+}
+
+bool IsZipHandleZ(HZIP hz)
+{ if (hz==0) return true;
+ TZipHandleData *han = (TZipHandleData*)hz;
+ return (han->flag==2);
+}
+
+//+++1.2
+/**
+* Added by Renaud Deysine. This fonctionnality was missing in API
+* @brief Add a folder to the zip file. Empty folders will also be added.
+* This method add recursively the content of a directory
+* @param AbsolutePath like "C:\\Windows" or "C:\\Windows\"
+* @param DirToAdd like "System32"
+*
+*/
+BOOL AddFolderContent(HZIP hZip, TCHAR* AbsolutePath, TCHAR* DirToAdd)
+{
+ HANDLE hFind; // file handle
+ WIN32_FIND_DATA FindFileData;
+ TCHAR PathToSearchInto [MAX_PATH] = {0};
+
+ if (NULL != DirToAdd)
+ {
+ ZipAdd(hZip, DirToAdd, 0, 0, ZIP_FOLDER);
+ }
+
+ // Construct the path to search into "C:\\Windows\\System32\\*"
+ _tcscpy(PathToSearchInto, AbsolutePath);
+ _tcscat(PathToSearchInto, _T("\\"));
+ _tcscat(PathToSearchInto, DirToAdd);
+ _tcscat(PathToSearchInto, _T("\\*"));
+
+ hFind = FindFirstFile(PathToSearchInto,&FindFileData); // find the first file
+ if(hFind == INVALID_HANDLE_VALUE)
+ {
+ return FALSE;
+ }
+
+ bool bSearch = true;
+ while(bSearch) // until we finds an entry
+ {
+ if(FindNextFile(hFind,&FindFileData))
+ {
+ // Don't care about . and ..
+ //if(IsDots(FindFileData.cFileName))
+ if ((_tcscmp(FindFileData.cFileName, _T(".")) == 0) ||
+ (_tcscmp(FindFileData.cFileName, _T("..")) == 0))
+ continue;
+
+ // We have found a directory
+ if((FindFileData.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY))
+ {
+ TCHAR RelativePathNewDirFound[MAX_PATH] = {0};
+ _tcscat(RelativePathNewDirFound, DirToAdd);
+ _tcscat(RelativePathNewDirFound, _T("\\"));
+ _tcscat(RelativePathNewDirFound, FindFileData.cFileName);
+
+ // Recursive call with the new directory found
+ if (AddFolderContent(hZip, AbsolutePath, RelativePathNewDirFound)== FALSE)
+ {
+ return FALSE ;
+ }
+
+ }
+ // We have found a file
+ else
+ {
+ // Add the found file to the zip file
+ TCHAR RelativePathNewFileFound[MAX_PATH] = {0};
+ _tcscpy(RelativePathNewFileFound, DirToAdd);
+ _tcscat(RelativePathNewFileFound, _T("\\"));
+ _tcscat(RelativePathNewFileFound, FindFileData.cFileName);
+
+ if (ZipAdd(hZip, RelativePathNewFileFound, RelativePathNewFileFound, 0, ZIP_FILENAME) != ZR_OK)
+ {
+ return FALSE;
+ }
+ }
+
+ }//FindNextFile
+ else
+ {
+ if(GetLastError() == ERROR_NO_MORE_FILES) // no more files there
+ bSearch = false;
+ else {
+ // some error occured, close the handle and return FALSE
+ FindClose(hFind);
+ return FALSE;
+ }
+ }
+ }//while
+
+ FindClose(hFind); // closing file handle
+ return true;
+
+}
+
diff --git a/src/Common/XZip.h b/src/Common/XZip.h
new file mode 100644
index 00000000..b1d43a92
--- /dev/null
+++ b/src/Common/XZip.h
@@ -0,0 +1,323 @@
+// XZip.h Version 1.3
+//
+// Authors: Mark Adler et al. (see below)
+//
+// Modified by: Lucian Wischik
+// lu@wischik.com
+//
+// Version 1.0 - Turned C files into just a single CPP file
+// - Made them compile cleanly as C++ files
+// - Gave them simpler APIs
+// - Added the ability to zip/unzip directly in memory without
+// any intermediate files
+//
+// Modified by: Hans Dietrich
+// hdietrich@gmail.com
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Lucian Wischik's comments:
+// --------------------------
+// THIS FILE is almost entirely based upon code by info-zip.
+// It has been modified by Lucian Wischik.
+// The original code may be found at http://www.info-zip.org
+// The original copyright text follows.
+//
+///////////////////////////////////////////////////////////////////////////////
+//
+// Original authors' comments:
+// ---------------------------
+// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The
+// definitive version of this document should be available at
+// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.
+//
+// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.
+//
+// For the purposes of this copyright and license, "Info-ZIP" is defined as
+// the following set of individuals:
+//
+// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,
+// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,
+// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,
+// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,
+// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,
+// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,
+// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White
+//
+// This software is provided "as is", without warranty of any kind, express
+// or implied. In no event shall Info-ZIP or its contributors be held liable
+// for any direct, indirect, incidental, special or consequential damages
+// arising out of the use of or inability to use this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. Redistributions of source code must retain the above copyright notice,
+// definition, disclaimer, and this list of conditions.
+//
+// 2. Redistributions in binary form (compiled executables) must reproduce
+// the above copyright notice, definition, disclaimer, and this list of
+// conditions in documentation and/or other materials provided with the
+// distribution. The sole exception to this condition is redistribution
+// of a standard UnZipSFX binary as part of a self-extracting archive;
+// that is permitted without inclusion of this license, as long as the
+// normal UnZipSFX banner has not been removed from the binary or disabled.
+//
+// 3. Altered versions--including, but not limited to, ports to new
+// operating systems, existing ports with new graphical interfaces, and
+// dynamic, shared, or static library versions--must be plainly marked
+// as such and must not be misrepresented as being the original source.
+// Such altered versions also must not be misrepresented as being
+// Info-ZIP releases--including, but not limited to, labeling of the
+// altered versions with the names "Info-ZIP" (or any variation thereof,
+// including, but not limited to, different capitalizations),
+// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of
+// Info-ZIP. Such altered versions are further prohibited from
+// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or
+// of the Info-ZIP URL(s).
+//
+// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",
+// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its
+// own source and binary releases.
+//
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef XZIP_H
+#define XZIP_H
+
+// ZIP functions -- for creating zip files
+// This file is a repackaged form of the Info-Zip source code available
+// at www.info-zip.org. The original copyright notice may be found in
+// zip.cpp. The repackaging was done by Lucian Wischik to simplify its
+// use in Windows/C++.
+
+#ifndef XUNZIP_H
+DECLARE_HANDLE(HZIP); // An HZIP identifies a zip file that is being created
+#endif
+
+typedef DWORD ZRESULT; // result codes from any of the zip functions. Listed later.
+
+// flag values passed to some functions
+#define ZIP_HANDLE 1
+#define ZIP_FILENAME 2
+#define ZIP_MEMORY 3
+#define ZIP_FOLDER 4
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// CreateZip()
+//
+// Purpose: Create a zip archive file
+//
+// Parameters: z - archive file name if flags is ZIP_FILENAME; for other
+// uses see below
+// len - for memory (ZIP_MEMORY) should be the buffer size;
+// for other uses, should be 0
+// flags - indicates usage, see below; for files, this will be
+// ZIP_FILENAME
+//
+// Returns: HZIP - non-zero if zip archive created ok, otherwise 0
+//
+HZIP CreateZip(void *z, unsigned int len, DWORD flags);
+// CreateZip - call this to start the creation of a zip file.
+// As the zip is being created, it will be stored somewhere:
+// to a pipe: CreateZip(hpipe_write, 0,ZIP_HANDLE);
+// in a file (by handle): CreateZip(hfile, 0,ZIP_HANDLE);
+// in a file (by name): CreateZip("c:\\test.zip", 0,ZIP_FILENAME);
+// in memory: CreateZip(buf, len,ZIP_MEMORY);
+// or in pagefile memory: CreateZip(0, len,ZIP_MEMORY);
+// The final case stores it in memory backed by the system paging file,
+// where the zip may not exceed len bytes. This is a bit friendlier than
+// allocating memory with new[]: it won't lead to fragmentation, and the
+// memory won't be touched unless needed.
+// Note: because pipes don't allow random access, the structure of a zipfile
+// created into a pipe is slightly different from that created into a file
+// or memory. In particular, the compressed-size of the item cannot be
+// stored in the zipfile until after the item itself. (Also, for an item added
+// itself via a pipe, the uncompressed-size might not either be known until
+// after.) This is not normally a problem. But if you try to unzip via a pipe
+// as well, then the unzipper will not know these things about the item until
+// after it has been unzipped. Therefore: for unzippers which don't just write
+// each item to disk or to a pipe, but instead pre-allocate memory space into
+// which to unzip them, then either you have to create the zip not to a pipe,
+// or you have to add items not from a pipe, or at least when adding items
+// from a pipe you have to specify the length.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// ZipAdd()
+//
+// Purpose: Add a file to a zip archive
+//
+// Parameters: hz - handle to an open zip archive
+// dstzn - name used inside the zip archive to identify the file
+// src - for a file (ZIP_FILENAME) this specifies the filename
+// to be added to the archive; for other uses, see below
+// len - for memory (ZIP_MEMORY) this specifies the buffer
+// length; for other uses, this should be 0
+// flags - indicates usage, see below; for files, this will be
+// ZIP_FILENAME
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+ZRESULT ZipAdd(HZIP hz, const TCHAR *dstzn, void *src, unsigned int len, DWORD flags);
+// ZipAdd - call this for each file to be added to the zip.
+// dstzn is the name that the file will be stored as in the zip file.
+// The file to be added to the zip can come
+// from a pipe: ZipAdd(hz,"file.dat", hpipe_read,0,ZIP_HANDLE);
+// from a file: ZipAdd(hz,"file.dat", hfile,0,ZIP_HANDLE);
+// from a fname: ZipAdd(hz,"file.dat", "c:\\docs\\origfile.dat",0,ZIP_FILENAME);
+// from memory: ZipAdd(hz,"subdir\\file.dat", buf,len,ZIP_MEMORY);
+// (folder): ZipAdd(hz,"subdir", 0,0,ZIP_FOLDER);
+// Note: if adding an item from a pipe, and if also creating the zip file itself
+// to a pipe, then you might wish to pass a non-zero length to the ZipAdd
+// function. This will let the zipfile store the items size ahead of the
+// compressed item itself, which in turn makes it easier when unzipping the
+// zipfile into a pipe.
+
+
+///////////////////////////////////////////////////////////////////////////////
+//
+// CloseZip()
+//
+// Purpose: Close an open zip archive
+//
+// Parameters: hz - handle to an open zip archive
+//
+// Returns: ZRESULT - ZR_OK if success, otherwise some other value
+//
+ZRESULT CloseZip(HZIP hz);
+// CloseZip - the zip handle must be closed with this function.
+
+
+ZRESULT ZipGetMemory(HZIP hz, void **buf, unsigned long *len);
+// ZipGetMemory - If the zip was created in memory, via ZipCreate(0,ZIP_MEMORY),
+// then this function will return information about that memory block.
+// buf will receive a pointer to its start, and len its length.
+// Note: you can't add any more after calling this.
+
+
+unsigned int FormatZipMessage(ZRESULT code, char *buf,unsigned int len);
+// FormatZipMessage - given an error code, formats it as a string.
+// It returns the length of the error message. If buf/len points
+// to a real buffer, then it also writes as much as possible into there.
+
+
+
+// These are the result codes:
+#define ZR_OK 0x00000000 // nb. the pseudo-code zr-recent is never returned,
+#define ZR_RECENT 0x00000001 // but can be passed to FormatZipMessage.
+// The following come from general system stuff (e.g. files not openable)
+#define ZR_GENMASK 0x0000FF00
+#define ZR_NODUPH 0x00000100 // couldn't duplicate the handle
+#define ZR_NOFILE 0x00000200 // couldn't create/open the file
+#define ZR_NOALLOC 0x00000300 // failed to allocate some resource
+#define ZR_WRITE 0x00000400 // a general error writing to the file
+#define ZR_NOTFOUND 0x00000500 // couldn't find that file in the zip
+#define ZR_MORE 0x00000600 // there's still more data to be unzipped
+#define ZR_CORRUPT 0x00000700 // the zipfile is corrupt or not a zipfile
+#define ZR_READ 0x00000800 // a general error reading the file
+// The following come from mistakes on the part of the caller
+#define ZR_CALLERMASK 0x00FF0000
+#define ZR_ARGS 0x00010000 // general mistake with the arguments
+#define ZR_NOTMMAP 0x00020000 // tried to ZipGetMemory, but that only works on mmap zipfiles, which yours wasn't
+#define ZR_MEMSIZE 0x00030000 // the memory size is too small
+#define ZR_FAILED 0x00040000 // the thing was already failed when you called this function
+#define ZR_ENDED 0x00050000 // the zip creation has already been closed
+#define ZR_MISSIZE 0x00060000 // the indicated input file size turned out mistaken
+#define ZR_PARTIALUNZ 0x00070000 // the file had already been partially unzipped
+#define ZR_ZMODE 0x00080000 // tried to mix creating/opening a zip
+// The following come from bugs within the zip library itself
+#define ZR_BUGMASK 0xFF000000
+#define ZR_NOTINITED 0x01000000 // initialisation didn't work
+#define ZR_SEEK 0x02000000 // trying to seek in an unseekable file
+#define ZR_NOCHANGE 0x04000000 // changed its mind on storage, but not allowed
+#define ZR_FLATE 0x05000000 // an internal error in the de/inflation code
+
+
+
+// e.g.
+//
+// (1) Traditional use, creating a zipfile from existing files
+// HZIP hz = CreateZip("c:\\temp.zip",0,ZIP_FILENAME);
+// ZipAdd(hz,"src1.txt", "c:\\src1.txt",0,ZIP_FILENAME);
+// ZipAdd(hz,"src2.bmp", "c:\\src2_origfn.bmp",0,ZIP_FILENAME);
+// CloseZip(hz);
+//
+// (2) Memory use, creating an auto-allocated mem-based zip file from various sources
+// HZIP hz = CreateZip(0,100000,ZIP_MEMORY);
+// // adding a conventional file...
+// ZipAdd(hz,"src1.txt", "c:\\src1.txt",0,ZIP_FILENAME);
+// // adding something from memory...
+// char buf[1000]; for (int i=0; i<1000; i++) buf[i]=(char)(i&0x7F);
+// ZipAdd(hz,"file.dat", buf,1000,ZIP_MEMORY);
+// // adding something from a pipe...
+// HANDLE hread,hwrite; CreatePipe(&hread,&write,NULL,0);
+// HANDLE hthread = CreateThread(ThreadFunc,(void*)hwrite);
+// ZipAdd(hz,"unz3.dat", hread,0,ZIP_HANDLE);
+// WaitForSingleObject(hthread,INFINITE);
+// CloseHandle(hthread); CloseHandle(hread);
+// ... meanwhile DWORD CALLBACK ThreadFunc(void *dat)
+// { HANDLE hwrite = (HANDLE)dat;
+// char buf[1000]={17};
+// DWORD writ; WriteFile(hwrite,buf,1000,&writ,NULL);
+// CloseHandle(hwrite);
+// return 0;
+// }
+// // and now that the zip is created, let's do something with it:
+// void *zbuf; unsigned long zlen; ZipGetMemory(hz,&zbuf,&zlen);
+// HANDLE hfz = CreateFile("test2.zip",GENERIC_WRITE,CREATE_ALWAYS);
+// DWORD writ; WriteFile(hfz,zbuf,zlen,&writ,NULL);
+// CloseHandle(hfz);
+// CloseZip(hz);
+//
+// (3) Handle use, for file handles and pipes
+// HANDLE hzread,hzwrite; CreatePipe(&hzread,&hzwrite);
+// HANDLE hthread = CreateThread(ZipReceiverThread,(void*)hread);
+// HZIP hz = ZipCreate(hzwrite,ZIP_HANDLE);
+// // ... add to it
+// CloseZip(hz);
+// CloseHandle(hzwrite);
+// WaitForSingleObject(hthread,INFINITE);
+// CloseHandle(hthread);
+// ... meanwhile DWORD CALLBACK ThreadFunc(void *dat)
+// { HANDLE hread = (HANDLE)dat;
+// char buf[1000];
+// while (true)
+// { DWORD red; ReadFile(hread,buf,1000,&red,NULL);
+// // ... and do something with this zip data we're receiving
+// if (red==0) break;
+// }
+// CloseHandle(hread);
+// return 0;
+// }
+//
+
+
+// Now we indulge in a little skullduggery so that the code works whether
+// the user has included just zip or both zip and unzip.
+// Idea: if header files for both zip and unzip are present, then presumably
+// the cpp files for zip and unzip are both present, so we will call
+// one or the other of them based on a dynamic choice. If the header file
+// for only one is present, then we will bind to that particular one.
+HZIP CreateZipZ(void *z,unsigned int len,DWORD flags);
+ZRESULT CloseZipZ(HZIP hz);
+unsigned int FormatZipMessageZ(ZRESULT code, char *buf,unsigned int len);
+bool IsZipHandleZ(HZIP hz);
+BOOL AddFolderContent(HZIP hZip, TCHAR* AbsolutePath, TCHAR* DirToAdd);
+
+#define CreateZip CreateZipZ
+
+#ifdef XUNZIP_H
+#undef CloseZip
+#define CloseZip(hz) (IsZipHandleZ(hz)?CloseZipZ(hz):CloseZipU(hz))
+#else
+#define CloseZip CloseZipZ
+#define FormatZipMessage FormatZipMessageZ
+#endif
+
+
+#endif //XZIP_H
diff --git a/src/ExpandVolume/ExpandVolume.vcxproj b/src/ExpandVolume/ExpandVolume.vcxproj
index 346282d1..de8f63b5 100644
--- a/src/ExpandVolume/ExpandVolume.vcxproj
+++ b/src/ExpandVolume/ExpandVolume.vcxproj
@@ -309,6 +309,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCryptExpander-x64.exe" &gt;NUL:
</ProjectReference>
</ItemGroup>
<ItemGroup>
+ <ClCompile Include="..\Common\XUnzip.cpp" />
+ <ClCompile Include="..\Common\XZip.cpp" />
<ClCompile Include="DlgExpandVolume.cpp" />
<ClCompile Include="ExpandVolume.c" />
<ClCompile Include="InitDataArea.c" />
@@ -381,6 +383,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCryptExpander-x64.exe" &gt;NUL:
<ClInclude Include="..\Common\Dlgcode.h" />
<ClInclude Include="..\Common\EncryptionThreadPool.h" />
<ClInclude Include="..\Common\Exception.h" />
+ <ClInclude Include="..\Common\XUnzip.h" />
+ <ClInclude Include="..\Common\XZip.h" />
<ClInclude Include="ExpandVolume.h" />
<ClInclude Include="..\Common\GfMul.h" />
<ClInclude Include="Hotkeys.h" />
diff --git a/src/ExpandVolume/ExpandVolume.vcxproj.filters b/src/ExpandVolume/ExpandVolume.vcxproj.filters
index c84fd9d8..9bd570a1 100644
--- a/src/ExpandVolume/ExpandVolume.vcxproj.filters
+++ b/src/ExpandVolume/ExpandVolume.vcxproj.filters
@@ -120,6 +120,12 @@
<ClCompile Include="..\Mount\Mount.c">
<Filter>Source Files\Mount</Filter>
</ClCompile>
+ <ClCompile Include="..\Common\XZip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
+ <ClCompile Include="..\Common\XUnzip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
</ItemGroup>
<ItemGroup>
<ClInclude Include="..\Common\Wipe.h">
@@ -224,6 +230,12 @@
<ClInclude Include="..\Common\Xts.h">
<Filter>Header Files</Filter>
</ClInclude>
+ <ClInclude Include="..\Common\XZip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\Common\XUnzip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
</ItemGroup>
<ItemGroup>
<Midl Include="..\Mount\MainCom.idl">
diff --git a/src/Format/Format.vcxproj b/src/Format/Format.vcxproj
index 75f876b1..0b4a8312 100644
--- a/src/Format/Format.vcxproj
+++ b/src/Format/Format.vcxproj
@@ -250,6 +250,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCrypt Format-x64.exe" &gt;NUL:
</PostBuildEvent>
</ItemDefinitionGroup>
<ItemGroup>
+ <ClCompile Include="..\Common\XUnzip.cpp" />
+ <ClCompile Include="..\Common\XZip.cpp" />
<ClCompile Include="FormatCom.cpp" />
<ClCompile Include="InPlace.c">
<CompileAs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">CompileAsCpp</CompileAs>
@@ -320,6 +322,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCrypt Format-x64.exe" &gt;NUL:
<ClInclude Include="..\Common\Exception.h" />
<ClInclude Include="..\Common\Fat.h" />
<ClInclude Include="..\Common\Format.h" />
+ <ClInclude Include="..\Common\XUnzip.h" />
+ <ClInclude Include="..\Common\XZip.h" />
<ClInclude Include="FormatCom.h" />
<ClInclude Include="..\Common\GfMul.h" />
<ClInclude Include="InPlace.h" />
diff --git a/src/Format/Format.vcxproj.filters b/src/Format/Format.vcxproj.filters
index 4f0e81eb..03d22739 100644
--- a/src/Format/Format.vcxproj.filters
+++ b/src/Format/Format.vcxproj.filters
@@ -108,6 +108,12 @@
<ClCompile Include="..\Common\Xts.c">
<Filter>Source Files\Common</Filter>
</ClCompile>
+ <ClCompile Include="..\Common\XZip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
+ <ClCompile Include="..\Common\XUnzip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
</ItemGroup>
<ItemGroup>
<Midl Include="FormatCom.idl">
@@ -208,6 +214,12 @@
<ClInclude Include="..\Common\Xts.h">
<Filter>Header Files</Filter>
</ClInclude>
+ <ClInclude Include="..\Common\XZip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\Common\XUnzip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
</ItemGroup>
<ItemGroup>
<None Include="..\Boot\Windows\Release_Serpent_SHA2\BootSector.bin">
diff --git a/src/Mount/Mount.vcxproj b/src/Mount/Mount.vcxproj
index 9a56b49e..8e7d894d 100644
--- a/src/Mount/Mount.vcxproj
+++ b/src/Mount/Mount.vcxproj
@@ -274,6 +274,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCrypt-x64.exe" &gt;NUL:
</PostBuildEvent>
</ItemDefinitionGroup>
<ItemGroup>
+ <ClCompile Include="..\Common\XUnzip.cpp" />
+ <ClCompile Include="..\Common\XZip.cpp" />
<ClCompile Include="Favorites.cpp" />
<ClCompile Include="Hotkeys.c" />
<ClCompile Include="MainCom.cpp" />
@@ -339,6 +341,8 @@ copy $(TargetPath) "..\Debug\Setup Files\VeraCrypt-x64.exe" &gt;NUL:
<ClInclude Include="..\Common\Dlgcode.h" />
<ClInclude Include="..\Common\EncryptionThreadPool.h" />
<ClInclude Include="..\Common\Exception.h" />
+ <ClInclude Include="..\Common\XUnzip.h" />
+ <ClInclude Include="..\Common\XZip.h" />
<ClInclude Include="Favorites.h" />
<ClInclude Include="..\Common\GfMul.h" />
<ClInclude Include="Hotkeys.h" />
diff --git a/src/Mount/Mount.vcxproj.filters b/src/Mount/Mount.vcxproj.filters
index b29330c4..fcc9445e 100644
--- a/src/Mount/Mount.vcxproj.filters
+++ b/src/Mount/Mount.vcxproj.filters
@@ -102,6 +102,12 @@
<ClCompile Include="..\Common\Xts.c">
<Filter>Source Files\Common</Filter>
</ClCompile>
+ <ClCompile Include="..\Common\XZip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
+ <ClCompile Include="..\Common\XUnzip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
</ItemGroup>
<ItemGroup>
<Midl Include="MainCom.idl">
@@ -205,6 +211,12 @@
<ClInclude Include="..\Common\Xts.h">
<Filter>Header Files</Filter>
</ClInclude>
+ <ClInclude Include="..\Common\XZip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\Common\XUnzip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
</ItemGroup>
<ItemGroup>
<None Include="..\Boot\Windows\Rescue_Serpent_SHA2\BootSector.bin">
diff --git a/src/Setup/Setup.vcxproj b/src/Setup/Setup.vcxproj
index 5d651249..c319dc1f 100644
--- a/src/Setup/Setup.vcxproj
+++ b/src/Setup/Setup.vcxproj
@@ -129,6 +129,8 @@ copy Debug\VeraCryptSetup.exe "..\Debug\Setup Files\VeraCrypt Setup.exe" &gt;NUL
</PostBuildEvent>
</ItemDefinitionGroup>
<ItemGroup>
+ <ClCompile Include="..\Common\XUnzip.cpp" />
+ <ClCompile Include="..\Common\XZip.cpp" />
<ClCompile Include="ComSetup.cpp" />
<ClCompile Include="Dir.c" />
<ClCompile Include="SelfExtract.c" />
@@ -172,6 +174,8 @@ copy Debug\VeraCryptSetup.exe "..\Debug\Setup Files\VeraCrypt Setup.exe" &gt;NUL
<ItemGroup>
<ClInclude Include="..\Common\Apidrvr.h" />
<ClInclude Include="..\Common\Combo.h" />
+ <ClInclude Include="..\Common\XUnzip.h" />
+ <ClInclude Include="..\Common\XZip.h" />
<ClInclude Include="ComSetup.h" />
<ClInclude Include="..\Common\Crc.h" />
<ClInclude Include="Dir.h" />
diff --git a/src/Setup/Setup.vcxproj.filters b/src/Setup/Setup.vcxproj.filters
index 60259901..6f288370 100644
--- a/src/Setup/Setup.vcxproj.filters
+++ b/src/Setup/Setup.vcxproj.filters
@@ -63,6 +63,12 @@
<ClCompile Include="..\Common\Registry.c">
<Filter>Source Files\Common</Filter>
</ClCompile>
+ <ClCompile Include="..\Common\XZip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
+ <ClCompile Include="..\Common\XUnzip.cpp">
+ <Filter>Source Files\Common</Filter>
+ </ClCompile>
</ItemGroup>
<ItemGroup>
<None Include="ComSetup.rgs">
@@ -148,6 +154,12 @@
<ClInclude Include="Wizard.h">
<Filter>Header Files</Filter>
</ClInclude>
+ <ClInclude Include="..\Common\XZip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="..\Common\XUnzip.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
</ItemGroup>
<ItemGroup>
<Manifest Include="Setup.manifest">